Along the way I had some good ideas that turned out pretty well
Guns used:
-LBB
-At2k
-At2k
First I had to decide how i wanted it to work. Do i want them all to have seperate triggers? Do I want them to fire all at once? Finaly I decided on having the LBB fire on its own trigger and have the 2 at2ks fire together on a second trigger. So I went about adding a handle for the new trigger. I thought it came out quite nicely.
Open
Closed
Seemed pretty flush with the case and I made sure it was sturdy cause its going to take a heavy beating.
So now I had to decide how I wanted to make the trigger fire the two at2ks. I knew the at2k trigger went around the pump handle but I knew I defenatly wasant going to fit two pump handles up there. I realized I allready had a tube to put it around. The LBB barrel went right through there.
Now I had to find some way to pull the pins back on both of the at2k chaimbers at once. This was simple enough. I took the pin pull mechanism from each gun and put them 180 degrees from eachother on the same orange trigger circle.
Here:
I wanted this to be easy to use so with a little case modding I was able to fit both handles parralell to the LBB one so i could pump them all together and easily release the at2k pumps to pump the LBB the rest of the way.
Here it is all together:
I still need to do all the cosmetic work on it like closing all the gaps and make it look nicer. I also need to add on the barrels to them. I was pretty happy with how it came out. It was fun to do also. I am not one to make up silly names for these types of things... so I wont. I would also appreciate if nobody else did either.
