I was wondering whats the max number of pumps you can pump an airtech3000 with a plugged pump without the tank cracking/ breaking. Also, when ever I pump fast, I start to hear squeaking noises after pumps. Is this good?
Airtech3000 Pump
Started by nerfboi, Feb 25 2007 05:25 PM
3 replies to this topic
#1
Posted 25 February 2007 - 05:25 PM
We Ride together, we die together, Bad boys for life.
#2
Posted 25 February 2007 - 07:04 PM
4 usually does it for me, if I'm making an extremely long range shot my limit is 6. Plus at 6 it leaves welts. The most I've ever done is 9, though I wouldn't do it again. No, it didn't explode, but it was ridiculously hard to pump and... yea it just wasn't good.
I wouldn't worry about the squeaking unless it gets worse. Just means something somewhere isn't lubricated, but as long as there's no corrosion it's not a problem.
I wouldn't worry about the squeaking unless it gets worse. Just means something somewhere isn't lubricated, but as long as there's no corrosion it's not a problem.
" Beneath this mask there is more than flesh, Mr. Creedy. Beneath this mask there is an idea...
...and ideas are bulletproof. "
...and ideas are bulletproof. "
V
#3
Posted 25 February 2007 - 08:01 PM
I think the squeeking noise could be from the OP release valve. If there isn't hotglue completely blocking it, some air could go through a little bit, making a high pitched noise.
And I've never gone above 4, I'm too scared of breaking it.
And I've never gone above 4, I'm too scared of breaking it.
#4
Posted 25 February 2007 - 09:14 PM
The most I've gone was 10. Thanks for answering my questions everybody.
- Nerfboi
- Nerfboi
We Ride together, we die together, Bad boys for life.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users