I have finally finished my latest mod: the At3kLS!
The whole thing:
Internals:
The pump hooks up where the bolt would usually slide- you pump the bolt handle to fill the tank.
Trigger bridge detail:
The trigger is bridged with a small LEGO peice- it's the right size and shape for what I needed. It's gooped to the LS trigger and the pin on the air tank fits through a hole in it, and is epoxied in place.
The barrel I'm using is 1' of 17/32" brass, nested inside 1/2" PVC and stuck in a coupler. I don't know ranges (it's too dark outside), but they should be the same as a singled At3k. This is a lot more comfterable to use than an At3K, and takes fewer pumps and has a lower chance of misfires than my LBB.
Air Tech 3000 In A Ls
Yes, I know someone allready did this
Started by monkey with a nf, Feb 18 2007 07:22 PM
6 replies to this topic
#2
Posted 18 February 2007 - 07:38 PM
I'm glad you solved your trigger problem.
Edited by Dart Attack, 18 February 2007 - 07:43 PM.
#3
Posted 18 February 2007 - 09:02 PM
It's a shame to have scrapped the magazine system (as far as I can tell, since the white tank blocks the magazine well). Anyways, nice modification.
The only commonly shared fate among us all is death. I turn to the shadows so that I may not be unfamiliar with hell's corridors when I arrive. - SHADOW HUNTER ALPHA
Founder of the Shadow Militia.
Founder of Nightshade Laboratories and The Nightshade Armament Corporation.
Founder of the Shadow Militia.
Founder of Nightshade Laboratories and The Nightshade Armament Corporation.
#4
Posted 18 February 2007 - 09:11 PM
Looks nice but you should put the jam door back on. It seems you fixed your trigger problem,
now you should buy/make one of the shotgun handles to pump easier. Unless your going to use that tubing coming out the back as a strap stick it inside the shell.
now you should buy/make one of the shotgun handles to pump easier. Unless your going to use that tubing coming out the back as a strap stick it inside the shell.
Played in 110 countries
Bigger than rugby
Bigger than snowboarding
Bigger than surfing.......Paintball
Bigger than rugby
Bigger than snowboarding
Bigger than surfing.......Paintball
#5
Posted 18 February 2007 - 10:08 PM
Shadow Hunter:
The intetion wasn't to make an air-powered LS, the intention was to make an air-powered asshole rifle. I just like how comfterable the case is to use.
navy seal:
I don't want to use a pump action kit; the point of putting the pump in the bolt was to keep the bipod, and possibly integrate the front gun. Also, the one I ordered is for when I get around to buying another LS. The reason the tubing is ouside the shell is because the stupid At3k parts have the tubing coming out at right angles. This was the only way I could make it fit. The jam door isn't on because 1) it won't fit on because of where the tank is and 2) it's easier to line up the barrel with the coulpler when there isn't a jam door.
EDIT: The board interperated B ) as a smiley.
The intetion wasn't to make an air-powered LS, the intention was to make an air-powered asshole rifle. I just like how comfterable the case is to use.
navy seal:
I don't want to use a pump action kit; the point of putting the pump in the bolt was to keep the bipod, and possibly integrate the front gun. Also, the one I ordered is for when I get around to buying another LS. The reason the tubing is ouside the shell is because the stupid At3k parts have the tubing coming out at right angles. This was the only way I could make it fit. The jam door isn't on because 1) it won't fit on because of where the tank is and 2) it's easier to line up the barrel with the coulpler when there isn't a jam door.
EDIT: The board interperated B ) as a smiley.
Edited by monkey_with_a_nf, 18 February 2007 - 10:10 PM.
For maximum efficiency?
1. Pump up. Count how many pumps.
2. Keep going until you hear a loud "bang".
3. Subtract one pump from the total. Rebuild your air bladder.
There you go.
#6
Posted 28 April 2007 - 12:23 PM
Thats realy sick,
I might do that to mine.
What kind of range does it get?
I might do that to mine.
What kind of range does it get?
#7
Posted 28 April 2007 - 12:33 PM
I wouldn't suggest doing that to your longshot unless it has already been scrapped. It would be a waste of money when you could just use a stock AT3K.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users