Co2 & Solenoid?
Posted 15 February 2007 - 11:39 PM
Posted 15 February 2007 - 11:43 PM
Edit: I found this:
"Regulator – The output of either the Nitrogen or CO2 tanks is about 800psi. Solenoid valves and actuators can only safely operate at about 100psi. The regulator decreases pressure in the airlines to levels that you specify (by turning a screw). Regulators are standard paintball parts, just like the expansion chamber and the tank. You have to be careful about which regulator you order. Not all paintball regulators can decrease the pressure below 100psi. Look for regulators that say they have an adjustable output pressure of 0-500psi."
Edited by Retiate, 15 February 2007 - 11:50 PM.
Posted 16 February 2007 - 07:33 AM
Posted 16 February 2007 - 08:42 AM
Posted 16 February 2007 - 11:52 AM
Posted 18 February 2007 - 05:02 PM
Edited by CaptainSlug, 18 February 2007 - 05:05 PM.
Posted 18 February 2007 - 07:55 PM
The cheaper solution that would require some machining is to simply link a lever-arm ball valve to a servo to make your own solenoid controlled valve. Or use a push-button valve and a solenoid (this option will give you a much wider variety of voltages to choose from).
Could you explain a little more on the push button valve and the Solenoid, sounds preaty cool?
Posted 19 February 2007 - 01:09 AM
Edited by Prometheus, 19 February 2007 - 01:10 AM.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users