Jump to content


Photo

Co2 & Solenoid?

Can They Mix?

8 replies to this topic

#1 blink 182

blink 182

    Member

  • Members
  • 421 posts

Posted 15 February 2007 - 11:39 PM

I'm Looking for a valve that Is capable of withstanding the pressure of co2 from say a 20oz paintball tank. This in not for a nerf gun don't worry. Although, I was wondering If I could use the solenoids I see everyone using on there homemade guns or they wont stand up to the pressure? I need an electronically controlled valve that is capable of hooking up a push button for on/off opperation.

Thanks guys!
  • 0
New Price On Freedom, Buy Into It While Supplies Last...



#2 Retiate

Retiate

    Member

  • Members
  • 778 posts

Posted 15 February 2007 - 11:43 PM

I don't quite understand. What do you need a solenoid valve for?

Edit: I found this:

"Regulator – The output of either the Nitrogen or CO2 tanks is about 800psi. Solenoid valves and actuators can only safely operate at about 100psi. The regulator decreases pressure in the airlines to levels that you specify (by turning a screw). Regulators are standard paintball parts, just like the expansion chamber and the tank. You have to be careful about which regulator you order. Not all paintball regulators can decrease the pressure below 100psi. Look for regulators that say they have an adjustable output pressure of 0-500psi."

Found Here.

Edited by Retiate, 15 February 2007 - 11:50 PM.

  • 0

#3 blink 182

blink 182

    Member

  • Members
  • 421 posts

Posted 16 February 2007 - 07:33 AM

All I need the valve for is just to regualte the flow of co2. Yes indeed, co2 tanks have an output pressure of around 800psi, but I need that high pressure. I can't run it through a regualtor first to lower the pressure down to say 100psi. So the lawnsprinkler solenoid valves only have a max psi rating of around 125tops...not good. Does anyone know of any other type of solenoid with a psi ratting of around 850psi?
  • 0
New Price On Freedom, Buy Into It While Supplies Last...



#4 Prometheus

Prometheus

    Member

  • Members
  • 780 posts

Posted 16 February 2007 - 08:42 AM

McMaster-Carr has solenoid valves that will work, but they are probably out of your price range, as they are around $500-600. A solenoid valve that can operate at this type of psi won't be something you can pick up cheap at your local hardware store. You could possibly tear apart a cheap paintball gun, but as far as I know they have a very limited range.
  • 0
QUOTE(VACC @ Jan 24 2008, 06:12 AM) View Post
I am NEVER going to sleep naked in the bed of a former child star ever again....seriously

#5 blink 182

blink 182

    Member

  • Members
  • 421 posts

Posted 16 February 2007 - 11:52 AM

I could use a Nitrous Solenoid (This idea is to create a co2 purging system for effect.) I'm trying to save money with the solenoid and look at all options. If I can't find anything thats safe (and under 150$) then I think I Will just go with the kit.
  • 0
New Price On Freedom, Buy Into It While Supplies Last...



#6 Deja Vu

Deja Vu

    Member

  • Members
  • 11 posts

Posted 18 February 2007 - 03:54 PM

Get a QEV, it will hold enough pressure
  • 0

#7 CaptainSlug

CaptainSlug

    Resident Mad Scientist

  • Administrators
  • 4,763 posts

Posted 18 February 2007 - 05:02 PM

The cheaper solution that would require some machining is to simply link a lever-arm ball valve to a servo to make your own solenoid controlled valve. Or use a push-button valve and a solenoid (this option will give you a much wider variety of voltages to choose from).

Edited by CaptainSlug, 18 February 2007 - 05:05 PM.

  • 0
The little critters of nature, they don't know that they're ugly. That's very funny, a fly marrying a bumble bee. I told you I'd shoot, but you didn't believe me. Why didn't you believe me?

#8 blink 182

blink 182

    Member

  • Members
  • 421 posts

Posted 18 February 2007 - 07:55 PM

The cheaper solution that would require some machining is to simply link a lever-arm ball valve to a servo to make your own solenoid controlled valve. Or use a push-button valve and a solenoid (this option will give you a much wider variety of voltages to choose from).



Could you explain a little more on the push button valve and the Solenoid, sounds preaty cool?
  • 0
New Price On Freedom, Buy Into It While Supplies Last...



#9 Prometheus

Prometheus

    Member

  • Members
  • 780 posts

Posted 19 February 2007 - 01:09 AM

you wire three 9V DC batteries in series, so you get 27 volts. You the use a momentary on switch to activate the solenoid, and when the switch is released, it shuts off, returning to normal.

Edited by Prometheus, 19 February 2007 - 01:10 AM.

  • 0
QUOTE(VACC @ Jan 24 2008, 06:12 AM) View Post
I am NEVER going to sleep naked in the bed of a former child star ever again....seriously


1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users