3 replies to this topic

[Gengar003]

After plugging my triple-strike's pump and discovering that it would shoot its arrows and stefans beyond the 50' mark out of its stock barrels, I opened it up to cpvc it...

I put it back together, and discovered that it won't hold pressure; every backstroke on the pump causes the air tanks to open up and leak.

There's three little yellow things behind the trigger, inside white plastic, one for each tube that leads to each barrel. I'm not sure what they need to be doing in order for the gun to work, though...

Has anyone had a triple-strike with this problem and managed to fix it? I haven't been able to figure out enough about it to provide enough information for someone who hasn't examined one to be able to help.

[nerfer34]

The triple strike is a wierd gun.

It's very cheap and unreliable.

You probably over pumped it when you had the OPRV plugged. Which means you gun is dead.

You also could have possibly assembled it wrong. Reassembling that thing is hard.

[Gengar003]

Well, when I take the internals out, shake them upside-down, and pump at the same time, it works... but I cannot for the life of me manage to re-assemble it in working order.

This was mostly a shot in the dark, hoping that someone else might have looked closer at one.

[nerfer34]

I have perfectly working internals.

If you pay me for shipping, I'll send them out you.

This is of course if you really like the gun.

I don't know what your Triple Strike's problem is.