Wanted To Ask The Experts
Posted 15 January 2007 - 02:44 AM
and install it into this. (BTW I have to thank Captain Slug for posting this pick it has come in quite handy several times)
now obviously the round part is the speaker I will be using a smaller battery box and the square piece between the speaker and the batteries is the circuitry and switch and the two parts to the right are obviously the LED's I will be adding one or two more to this but I wanted the experts opinion on the best way of installing this into my LS
Posted 15 January 2007 - 11:03 AM
"ah man, I would give you so much for one of those NIB crossbows or one of those crossbows on the floor. The ones on ebay have gone up to $59 and the shipping alone is $12." -Rip32
Posted 15 January 2007 - 12:12 PM
Posted 15 January 2007 - 01:33 PM
Posted 15 January 2007 - 02:39 PM
2.) Hot-glue (or adhesive of your choice) the important parts (LEDs/Speaker/Switch) where you want them.*
3.) Stick the other parts anywhere they fit. Anywhere.
4.) Wire them up, using dabs of hot glue every few inches and at bends to hold the wire in place.
*You might consider figuring out where it's *possible* to put the parts, then decide which is best, rather than decide where you want them and try to make them go there -- it could be easier.
Posted 15 January 2007 - 10:11 PM
Posted 16 January 2007 - 07:22 PM
You are exactly correct sniperdude
ok i believe that that is the light/sound system from a starwars clone blaster, so you would want the light by the barrel somehow, or right under the clip import, or above, and the speaker can go anywhere that u can fit it, and drill holes so the sound can come out, you might need to extend the wires with some more wire, and some solder.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users