2 replies to this topic

[flamebo388]

I think I may have found a solution to the problem that the majority secret shot 2's have, the leaking out the front. Most spray lubricant down the valve and it tends to work but you really need to get lube on this part.

The best way of doing this is to spray a crap load of silicon down the pump tube and let it drain down the tube to the valve, then pump it a bunch of times to get in the valve. Then repeat two or three more times, till the leaking stops. Mine was leaking so bad before that the tank was almost empty before you did the next pump, now it stops leaking at about 5-6 pumps.

[bigbob]

I see you cut your air tank into multiple pieces. Did you use some sort of glue (such as plumber's goop) to put it back together, and is it working now?

[flamebo388]

Yeah, I cut it open to find the problem and resealed it with Dev Con plastic welder, it's an epoxy that works extremely well with most plastics and does a pretty good job on most other materials as well. Plus it hardens to full strength in less than ten minutes. The gun gets ranges just past the hundred foot mark now, about 110-120ish.