Hey all. My blastfire seems to be severely underpowered, and it like does not advance to the next shot sometimes. I need help, like how do I fix these things when I open it up? I know exactly how the blastfire goes together, so don't worry about that.
Oh yeah and when I pump it, it lets some air out of the 3 bottom barrels.
2 replies to this topic
#1
Posted 02 September 2003 - 08:47 PM
#2
Posted 02 September 2003 - 11:59 PM
1. The three bottom barrels are not sealing properly. Squirt some WD40 in there and pump/blast cycle it a dozen times, repeat if necessary.
2. If it does not advance to the next shot sometimes then you're not pulling the trigger back all the way or you plugged the pump and you're over-pressurizing it. If it does not advance to the next shot every time then the trigger gear is on the wrong sprocket.
3. What do you mean by ``underpowered''? Did you plug the pump? Replace the barrels? What material/length? Flat distance? Affected by time since pumping?
2. If it does not advance to the next shot sometimes then you're not pulling the trigger back all the way or you plugged the pump and you're over-pressurizing it. If it does not advance to the next shot every time then the trigger gear is on the wrong sprocket.
3. What do you mean by ``underpowered''? Did you plug the pump? Replace the barrels? What material/length? Flat distance? Affected by time since pumping?
<meta name="cxwq" content="mostly water">
#3
Posted 03 September 2003 - 12:28 AM
The pump might be plugged (not sure), but otherwise its stock. the sprocket is in the right spot, and i pull the trigger back every time. It doesnt skip if I only pump it like 7 times, but it cant get all the way across my living room in range. Hmm maybe the wd40 thing will fix my lightning blitz. one of the tanks doesn't seal properly so it doesn't fire.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users