![Posted Image](http://img243.imageshack.us/img243/2878/guns1045mn5.th.jpg)
![Posted Image](http://img137.imageshack.us/img137/7938/guns1047ga3.th.jpg)
![Posted Image](http://img137.imageshack.us/img137/9019/guns1046if3.th.jpg)
Length: 31 inches
hight: 7.5 inches
barrel length: 8 inches
caliber: micro stephans
ROF: 60RPM
Power: spring plunger 4
Plunger stroke: 4 1/2 inches
Loading: bolt action breech
flat range:65 feet
angled range: 105 feet
Design: When I origanally designed it it was a much better gun with a magazine, however this gun is the dumbed down version of It. I designed it in school using parts I knew I have. I made it with mass production and high reproducability. This is one of the simplist designs I made. After my first faliure of a pistol I realized I needed metal for the catch parts as it is far more durable.
Materials: The materials for this are very easy to get.
-1/2 inch PVC
-1/2 inch CPVC
-3/4 inch PVC
-1 inch PVC
-1 1/4 inch PVC
-clothspin
-nail
-random screws from basement
- 3/4 inch PVC endcap
-3/4 to 1/2 inch PVC reducer
-1 1/4 to 1/2 inch PVC reducer
-nut and bolt unknown size
-2, 25LB springs
-1/2 inch CPVC endcap
-o-rings
-washer from basement with ID of OD of 1/2 CPVC
Component detail
![Posted Image](http://img82.imageshack.us/img82/888/guns1041wp7.th.jpg)
Internal pic
![Posted Image](http://img244.imageshack.us/img244/1184/guns1042hn9.th.jpg)
plunger and plunger tube
![Posted Image](http://img171.imageshack.us/img171/6937/guns1043cr4.th.jpg)
clothspin trigger and spring
![Posted Image](http://img171.imageshack.us/img171/6682/guns1044so6.th.jpg)
grip and other things in background
![Posted Image](http://img244.imageshack.us/img244/8071/guns1040fl8.th.jpg)
open breech
Improvements:
-Make magazine for it
-move trigger forward and use scar-n trigger system
-make range better
Questions and comments will be answered.
-DTR
Edited by DTReaper, 27 November 2006 - 07:57 PM.