Jump to content


Photo

All My Modifications


12 replies to this topic

#1 Bob3104558

Bob3104558

    Member

  • Banned
  • 18 posts

Posted 21 October 2006 - 12:38 PM

Hi guys, im brand new to nerfhaven, it took like 3 weeks to get me registered but im finally here. Ive been posting on nerfhq for a while, so ill show u what ive done to my maverick so far

Ok first thing to do:
Remove all the screws, and seperate the 2 halves
Then remove the entire breech (group of barrels) and the hinging mechanism from the gun
Next take a screwdriver or a punch and punch out the metal rod that goes down the center of the breech
The rod is normally has 2 plastic round plugs, thats what u punch the rod out of
After u have the rod, with 1 plastic plug on one end, then u are going to sut that rod off, about 1 inch from the end
After that et the rod aside
This is what the rod should look like, i will get to the placement of it later
Posted Image

The next thing u do is remove the 3 screws on the back of the breech
Then seperate the back part of the breech
U should see 2 very small silver screws that connect to the orange plastic thing
U want to remove the 2 screwes, then remove the grey hinge and replace the screws
This is what the finished breech should look like
Posted Image

Next u need to seperate the 2 half of the gun
And remove the spring, plunger, and trigger mechanism
U remove this so when ur cutting it, it wont get in the way
Then put the 2 half back together, with no screws inplace
Now u need to cut the top of the plastic as shown
I left quite a bit of gap for the velcro to go
Posted Image

Next u wanna remove the 2 halfs
And on the left hand side, u wanna cut as shown
Posted Image
Posted Image

Now on the right hand side, cut as shown
Posted Image

Now u want to drill out the left hand side screw hole, not too big thou
Just enough for the screw to go in and be able to turn
U do this so when u screw the sides back on, the gun actually hinges on that screw

I hope i have been clear, if u have any questions or need more detailed pics, let me know


Im seling the mavericks, $25 shipped, i have 2
Im also selling a brass barreled NF
http://cgi.ebay.com/...19756&rd=1&rd=1
Also im selling a modded and painted longshot
http://cgi.ebay.com/...36680&rd=1&rd=1


Also i have modded several NF's

heres 1:
Posted Image

Posted Image

Posted Image

Posted Image

Edited by Bob3104558, 21 October 2006 - 10:12 PM.


#2 blinkycc13

blinkycc13

    Member

  • Members
  • 74 posts

Posted 21 October 2006 - 12:48 PM

I really like that mav. Very nice. Your 3rd and 4th links are the same.
  • 0
QUOTE(Dark Shrimp @ Nov 10 2006, 11:06 PM) View Post

This is called a screwdriver it is used to unscrew or screw in screws.

#3 Omega

Omega

    Member

  • Members
  • 287 posts
  • Location:Santa Maria, CA

Posted 21 October 2006 - 01:01 PM

Holy crap. I really like that Maverick.


But I also request that you clean up your spelling/punctuation/capitalization. It's in the Code of Conduct; we are supposed to have good spelling/puctuation/capitalization. One thing I suggest, if you really suck at those subjects, is to run it through the spell check on a word processor. That usually helps.


By the way, that wasn't a flame. That Maverick owns. Not bad consistency or accuracy either. I just thought it would be worthwhile to point that out to you before a mod is upset. I think you could be a pretty good modder; that Mav shows some real potential.


Also, could you please post a writeup on how, exactly, you did that? If you you did, any ordinary mavs in my house would disappear faster than the hors d'oeurves at a Richard Simmons Sweatin' to the Oldies reunion.
  • 0
QUOTE(Vishamon)
My rule is that those wearing a thong are considered to be invisible to other players.


#4 six-five-two

six-five-two

    Member

  • Members
  • 752 posts
  • Location:Vancouver, B.C.

Posted 21 October 2006 - 01:06 PM

WHOA that maverick is kick ass. Post a write up on it!! Oh, can you snap it in place instead of using your hand?
  • 0

#5 Omega

Omega

    Member

  • Members
  • 287 posts
  • Location:Santa Maria, CA

Posted 21 October 2006 - 01:13 PM

I believe that he said that he is working on making a snap, but for now he his using his hand.


If he posts a writeup, I will most definitely mod my Mavericks, and add a snap as well.


I'll also get the chance to tackle the ARs on a rotary barrel! Wahoo! I haven't attempted it yet because I happen to like my mav, and I'm afraid I'm gonna mess up and ruin my gun.


You hath inspired me, Bob. If you get a writeup, I'll get to work. And perhaps post a few piccies and a paintjob. The paintjob will be so that it looks more like a real revolver. You know, so it looks awesome.
  • 0
QUOTE(Vishamon)
My rule is that those wearing a thong are considered to be invisible to other players.


#6 TheCheatIsNotDead

TheCheatIsNotDead

    Member

  • Members
  • 97 posts

Posted 21 October 2006 - 03:06 PM

... That was MY IDEA!!!

The top break revolver for the Maverick is FANTASTIC! Make a write up, and before you can say "OMFG", I can have my moon clip idea working!

Once I find some brass that it. I CAN'T FIND BRASS TUBING ANYWHERE!

Bah.

But once I do, I think that It'll be really cool.

Well done indeed! You get a cookie!

~TCIND
  • 0
It is impossible to govern a country with 120 different types of cheese.

#7 SPU-Nerf

SPU-Nerf

    Member

  • Members
  • 166 posts

Posted 21 October 2006 - 05:31 PM

What the heck did you do the your NF (good job on the Mav, its sweet)
Is the NF even easy to use/aim?
  • 0

#8 Bob3104558

Bob3104558

    Member

  • Banned
  • 18 posts

Posted 21 October 2006 - 06:52 PM

Yeah its real easy to aim and use. I was just bored and had several NF's layin around decided to do something new.

Edited by Bob3104558, 21 October 2006 - 10:13 PM.


#9 Omega

Omega

    Member

  • Members
  • 287 posts
  • Location:Santa Maria, CA

Posted 21 October 2006 - 08:58 PM

EDIT:

Whoops. Ignore. Stupid post; thanks for the writeup!

Edited by Omega, 21 October 2006 - 08:59 PM.

  • 0
QUOTE(Vishamon)
My rule is that those wearing a thong are considered to be invisible to other players.


#10 The Crackerjack Man

The Crackerjack Man

    Member

  • Members
  • 203 posts

Posted 21 October 2006 - 09:00 PM

Nice work, I might try this sometime when I can.
  • 0
"Wow, you realy screwed that guy over"

#11 philadel Elite

philadel Elite

    Member

  • Members
  • 56 posts
  • Location:philadelphia, PA

Posted 21 October 2006 - 09:10 PM

HA!
You beat me I was about to post my Mav. mod. That i did today. Same way you did...
well not really. I bought a small hindge. 1/2 inch..
But still beat me to put it up.
  • 0

#12 CaptainSlug

CaptainSlug

    Resident Mad Scientist

  • Administrators
  • 4,761 posts

Posted 21 October 2006 - 09:18 PM

Bob, if you want to sell something please keep it in the Trading section.

I CAN'T FIND BRASS TUBING ANYWHERE!

Tower Hobbies, Mcmaster, Onlinemetals, and a bunch of other places stock it. Aluminum is a cheaper alternative that may be easier to find in the fractional sizes you want.

Edited by CaptainSlug, 21 October 2006 - 09:18 PM.

  • 0
The little critters of nature, they don't know that they're ugly. That's very funny, a fly marrying a bumble bee. I told you I'd shoot, but you didn't believe me. Why didn't you believe me?

#13 Bob3104558

Bob3104558

    Member

  • Banned
  • 18 posts

Posted 24 October 2006 - 08:45 AM

Elite, post a pic. I wanna see what u did to your mav.


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users