4 replies to this topic

[Grenado]

I just tried to mod my RF20, nothing major, just shook out the air restrictors. All I did was the first part of the den of foam mod. I can pump it up, 23 pumps, but when I pull the trigger, all I get is the hissing noise when all the shots have been fired. I didn't mess with the air pladder or the pipes or anything. Any suggestions?

P.S. If I should post pictures, just tell me.

[navy seal]

Does it still fire the darts? The air restrictors have nothing to do with the guns internals so something probably wasn't put back in where it should go.

When I put my rf20 back together I didn't put the slector switch on right so when screwed the black case on and the gun wouldn't fire because the slector was jammed. If you can post pictures that might help or just find a picture of an open rf20 in a mod and compare it to yours.

[SPU-Nerf]

Does it still fire?
If so it still works and count your self lucky.
If darts stop coming out then it is broken (like mine was)
ps. I hate the RF20 and its stupid weak un-replace-able rubber o-ring.

[Grenado]

It doesn't fire darts now, but I didn't muck around with the internals. I'm gonna check it out with one of my buddies, who is really good with these sorts of things. I wasn't really clear at the beginning, but what happens is that air gets released, because there is no pressure in the gun. I'm trying to fix it now.

Edited by Grenado, 02 October 2006 - 09:06 PM.

[Grenado]

Sorry for the double post, but I fixed it. No one needs to post in here anymore, not that many people did.