Do you all remember the old push pull crossbow with the missles that always seem to get lost?
Well I do and I thought how can I make it better. So here goes my first write up!
Well in this mod I converted the crossbow to shoot stock mico darts and made it into a spring type gun without the spring!!
So here goes.
you will need a
latex rubber tubing
and of course the double crossbow
Take your crossbow, see the crappy reddish post things, cut them off at the very bottem.
(I took off the hold thing because mine broke when I dropped the gun.)
Take your cpvc cut it to the length you want (make sure you look at the bottem as they will slide over a bit) and put hot glue on the bottem and push it on to the purple stubs it should fit nice and tight and hot glue them to the crossbow
Ok, now take your rubber tubing and rap it around the crossbow and tie it make shure it is very tight.
Now you have a rubber powered double crossbow!
Ok I got the ranges. Both tests were done with both barrles full and i am taking the range from were the farthest of the two darts landed.
3 shots Flat
shot 1 60ft
shot 2 58ft
shot 3 59ft
3 shots 45 angle
shot 1 67ft
shot 2 69ft
shot 3 67ft
Well there are the ranges
edit- Pics yayy!
Edit- Spelling, grammer, and more specific points.
Edited by radman, 14 October 2006 - 05:53 PM.