11 replies to this topic

[Stormleader]

I am wondering what I could use for female rail parts to go on the rails of a Nitefinder, Longshot...ect.
Before you ask I have seached I seached fo: female,female rails,female rail parts.
I will be thank-full for any help.






Storm.

[Vyperaeon Omega]

My suggestion: the top brackets on a Crossfire. With a proper amount of glue or tape, you can slap just about anything on them and just snap your accessory onto a Nite Finder or Longshot, or any N-Strike gun.

[pat 1st Lt]

The clip in the side of the Titan, the clip on the top of the Crossfire, and the clip on the bottom of the Longshot sight are all what you want. Open any of them up, take out the clip, and do whatever you want with it. I believe that there was an old topic where someone attached a SSPB to the clip, so they could have an extra shot on any of the N-Strike guns.

Just out of curiosity, what do you want the clips for?




-Pat

[Langley]

you can get aluminum at the hardware store and make your own pretty easily. I've done it before, I'll see if I can dig up my homemade clip and take some pictures of it. It's made with two pieces of aluminum channel stock bolted to a thin piece of plywood. it basically looks like this:
[ ]
where the underline is the plywood and the [ ] brackets are made of the same stuff I used to do this:
http://img.photobuck...rf/DVC00168.jpg

[General Cole]

That is pretty smart Retiate. If you are really desperate I can sell you some.

[Vyperaeon Omega]

Umm, Cole, that's not Retiate. That's Langley, who's been around a hell of a lot longer. They just have the same avatar.

On topic now, I suppose it's possible to create your own rails, but I'm curious as to what people need them for. I also want to ask anyone, though I'll be testing this tonight: Are N-Strike rails compatible with the 20mm tac rails on airsoft and real guns? That would be a strange design move for Hasbro, but milsim Nerf *stifles snicker* would benefit from such a feature. Has anyone experimented with tac rail-N-Strike compatability?

[Stormleader]

Thanks for the ideas! General cole I have a Lowes and Homedepot close to my house so I don't need any thing.





Storm

[General Cole]

Sorry Langley, I usually tell people by thier avatars.

[JSkater]

Psh, someone is using my avatar, too.

Ah, well.

[General Cole]

Hey langley what kind of aluminum do you use on those things? Is it flat, or cut down tubing?

[euphemism]

It's made with two pieces of aluminum channel stock bolted to a thin piece of plywood.

[Langley]

This is what I was refering to earlier. I always meant to bolt this thing to the side of my crossbow.