Kapowwe Airsoft Nades
#1
Posted 04 September 2006 - 04:57 PM
-Butt
This contest may have some flaws, as people can simply be a deuschbag over the internet. By Lying.
A war-like setting/invitational would be better...
#2
Posted 04 September 2006 - 05:05 PM
If the darts deteriorate, you could try clear-coating them or find something else to coat them in that would not deteriorate.
EDIT: Sp
Edited by Flaming Hilt, 04 September 2006 - 05:05 PM.
...and ideas are bulletproof. "
#3
Posted 04 September 2006 - 06:35 PM
It's a neat triggering system...maybe this could be used in the long talked about "vinegar homemade".
Edited by Carbon, 04 September 2006 - 06:36 PM.
#4
Posted 04 September 2006 - 07:17 PM
maybe this could be used in the long talked about "vinegar homemade".
I can see how we could use the propulsion, although we'd have to somehow get it to trigger faster. How many times is a target lined up 3 seconds after you pull the trigger?
...and ideas are bulletproof. "
#5
Posted 04 September 2006 - 07:38 PM
[Hijacking the thread]
maybe this could be used in the long talked about "vinegar homemade".
I can see how we could use the propulsion, although we'd have to somehow get it to trigger faster. How many times is a target lined up 3 seconds after you pull the trigger?
I was more thinking of a way that you could use to charge an air tank...three seconds (maybe five for a larger tank) is a lot easier than pumping twenty or thirty times. Trigger as normal what whatever kind of valve you like.
#6
Posted 04 September 2006 - 07:42 PM
It would affect your accuracy a lot though, I mean seriously, who can shoot nerf guns strait when they're drunk?
#7
Posted 04 September 2006 - 09:01 PM
#8
Posted 05 September 2006 - 07:54 AM
#9
Posted 05 September 2006 - 07:23 PM
But anywho... the site explains how the 'naid works and obviously the size is too small so why dont we make our own? Nerf scale. all we need is a basic chem reaction that creates gas (most chem reactions do) and gas = pressure. Also the reacton must involve easly obtainable ingredients. But bakeing soda vinager fizzes and that would mean that the 'naid would be a foam spewing bubbly mess. So any other suggestions?
Awhile ago someone came up withe the idea to have it be pump pressurized, I think that this is a relitivly feasable idea. And you could make it be like a german style grenade (as of WWII) where it has a handle for ease of throwing and in our case the pump shaft. But the problem arises on how the foam peices would be released. Suggestions to this one would also be nice..
Got Nerd?
#10
Posted 23 September 2006 - 11:31 AM
think it would work?
kiley says "make me!"
#11
Posted 23 September 2006 - 12:15 PM
-Nerfer34
You know what... I know it's kinda late... but Props Cole.
-Baghead
#12
Posted 23 September 2006 - 02:45 PM
I am going to go with the gas homemade airsoft grenade format.
Gas inlet on a GBB in a PVC pipe with 2 containers on the side of the PVC that would go off on impact to the ground. The only thing I would have to do to make it safe, is pad the end caps to avoid injury if it goes off in the air and lands on someone. It would require more gas than ussual on a GBB, but gas is pretty accessable around me. I can get a tank for 10 bucks...and I have had it for a year now, filled my gun up )50 shots per spray) roughly 30 times, and I have yet to run out. So I vote premade gas rather than a system that makes the gas and then releases. Either that, or just use a frickin airsoft grenade. We will have eye protection on anyways, so who would care? I plan to use smoke grenades next war I go to also, so I will see how effective one of these homemade airsfot grenades are and determine if it is plausable to project a nerf dart with gas.
#13
Posted 24 September 2006 - 01:51 PM
Someone should buy some of these and try them as they are in a normal war. Maybe I will.
Good find,
-Anubis
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users