'06 Blasters Mod Ideas
#1
Posted 19 July 2006 - 06:58 PM
I know not what WWIII wil be fought with; however, WWIV will be fought with sticks and stones...
#2
Posted 19 July 2006 - 07:54 PM
As for the longshot I need to get one before I can say what I could do with it (besides the logical, remove airflow restrictors and replace the plunger head.)
#3
Posted 19 July 2006 - 08:02 PM
Anyway on the magstrike i would say other than drilling air ristrictors and pum plugs and things. maybe add a barrel! Well more of one anyway, so my idea is to nest some PETG or brass in 1/2 pvc so the mag fits through. Then on one end at the very edge and cut out the mag rectangle with no pvc on one of the short sides. Then attach that side to where the air is outputted and when it fires the dart it should fire through a barrel for more accuracy and distance. I hope .
Under
Ground
Nerf
Squad
Alias Scoped loser (+)
(.)(.)
LordofTheRings434
"In a sense, what I'm saying is that you shouldn't waste your time handling your balls. Go for the foamy rods instead."
#4
Posted 19 July 2006 - 08:28 PM
However, you can still do a bunch of PC mods to it (rubber bands/bike tire tubing over the bladder, RF20 bladder replacement/backpack [ompa], cut the bladder down [some say it's good, others bad]) and even sand some stuff on both PC and MS clips so they can be interchangeable (Lt. Pat's discovery). Basically, anything that can be done to the PC, the MS can do it too, and sometimes better (slightly bigger bladder means better stock ranges, but if you cut/replace the bladder on both to the same size, they're basically the same gun).
I have 1/2" ID (11/4" OD) pipe insulation sheathed over mine. It's like a condom; be safe.
#5
Posted 19 July 2006 - 08:57 PM
However, you can still do a bunch of PC mods to it (rubber bands/bike tire tubing over the bladder, RF20 bladder replacement/backpack [ompa], cut the bladder down [some say it's good, others bad]) and even sand some stuff on both PC and MS clips so they can be interchangeable (Lt. Pat's discovery). Basically, anything that can be done to the PC, the MS can do it too, and sometimes better (slightly bigger bladder means better stock ranges, but if you cut/replace the bladder on both to the same size, they're basically the same gun).
2nd Lt. Don't go promoting me yet. I reckon once Will heads off to College there'll be some changes, and I'll take up Bravo. And it's SOP to have a Lieutenant heading up Bravo.
Anyway, yeah, those are all good possible mods for the Magstrike. Also, another thing I figured out; once the restrictors are gone, with a little sanding from the back of the barrels, 17/32" brass can be fully nested through the barrels. Or, with only the restrictors gone, you can put 17/32" brass through all but about 1/3" of the barrels. This negates the need for 'secondary' barrels, like Maverick Master was talking about.
I haven't acutally cut the brass and made a brassed MS clip (Can I just call it a BMSC? I don't like typing 'brassed'. I always spell it wrong and have to type it again), so don't ask for ranges or anything yet. I probably will get around to it in a couple days, maybe on Saturday, after I get certified. Anyway, my Stefans don't fit well in 17/32 for a weak air gun. They're really tight, so that might not be best for a gun like the Magstrike. However, I'll whip up some Loser Darts (No, not asshole darts. I actually have started calling them loser darts in real life.) with some lighter weights than normal, so the MS can handle them more easily.
So, once I make a BMSC with 17/32" and 1/2" brass (So they'll fit converted Dart Tag loser darts well), I'll get back to you with some ranges and results.
Also, I may minimize the bladder. It'll hold less air, but it'll be more powerful per-shot. I don't mind losing the two-mag capability, because the trigger timing is hard to pull off. Well, then again, maybe I'll replace the bladder with a bigger tube, and get rid of the OPRV wall (The wall that the Over Pressure Release Valve presses against in order to be activated). That might work well too. I'm tempted to try what Ompa said about some kind of Backpack rig, but I've never done anything like that before, and I've seen too many ideas like that in the home-mades section shot down in seconds.
Well, I'll get back to you all on Saturday with some mods results for the Magstrike. I just hope I don't fuck it up; it's new, it's expensive, and it's pretty damn good un-modded.
Sincereley,
Pat
#6
Posted 20 July 2006 - 10:32 PM
~Petrie
#7
Posted 20 July 2006 - 10:45 PM
QUOTE (Talio) |
Catagory 5 hurricanes are the mighty dick of God. You don't mess with that! You don't mess with Gods dick! |
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users