I just modded my lnl just like cxwq's mod says to but I used 9/16 brass instead of 1/2. but anyway, it shoots worse than when i had the pvc in it. I also have 17/32 brass that I could swap with it but I dont' know if that would help or not. I don't know if the 9/16 is a bad size to use or if there's an air leak or what. I just need help.
2 replies to this topic
#1
Nerf929
-
- Members
- 38 posts
Member
Posted 06 August 2003 - 09:20 PM
The Boy Who Ate Fire
by: Adam (Me)
Once there was a boy who ate fire. He died.
The End
by: Adam (Me)
Once there was a boy who ate fire. He died.
The End
#2
Wax
-
- Members
- 68 posts
Member
Posted 06 August 2003 - 11:11 PM
For the gun to shoot well, the dart needs to fit tightly in the barrel. The 17/32 in. would be better than the 9/16 (18/32), but not by much. If your darts (you should be using Stefans with 1/2 in. brass anyway) do fit tightly, then there's probably a leak in the connection between the barrel and plunger chamber. Something may be wrong with the plunger itself. Other than that, I don't know what could be wrong.
Wax in the Nerf universe, wax4213 everywhere else.
#3
Nerf929
-
- Members
- 38 posts
Member
Posted 06 August 2003 - 11:52 PM
I'll try putting on the 17/32 brass. Thank's Wax
The Boy Who Ate Fire
by: Adam (Me)
Once there was a boy who ate fire. He died.
The End
by: Adam (Me)
Once there was a boy who ate fire. He died.
The End
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
