8 replies to this topic

[meiser5]

Okay guys, if you did not hear the back ground story on this you would chew me out for asking this but hear it goes. I need to know if there is a way to get larami darts because i have looked and called every where in my town and cannot find them. I even tried getting them on ebay or special ordering them directly from Hasbro but to no aveil. I need help, please respond fast.


Does any of the older members have any in put, i mean i have experimented with megas but they are to heavy even when they are cut down, and unless i was able to get a picture of the darts that carbon suggested i would not know for sure if the darts would work with my sm1500.
PLEASE HELP!

Edited by meiser5, 24 May 2006 - 04:12 PM.

[Carbon]

You'll find no joy in stores, you'll need to order them. Apparently, Hasbro has them up for sale on their site. The pink and green ones are the collarless darts needed.

Click Me!

Hint: search for "larami darts", and read a few likely threads. It's been talked about before.

[AssassinNF]

From what I've heard, the pink and green darts on Hasbro's order form are NOT standard larami's, and they are the darts that came with the SM3000 blue edition, which are basically just regular micros.

I don't know this for sure because I have not ordered them, but I talked to someone who had, and they stopped me from wasting my cash.

[Carbon]

Read this thread. There's some pictures in there as well.

[meiser5]

Thankyou for all the help, im still pretty new at this so i admit i might have looked like a lazy ass on this thread, but i will order some and see if they work with the older larimi guns like the 750 and 1500.

On another note, if the holes on the back were not big enough but the dart was thick like a mega couldent you just use a hot glue gun to enlarge the hole, or would that be out of the question?

Edited by meiser5, 26 May 2006 - 09:40 AM.

[Uncle Hammer]

Out of the question. Megas have holes drilled all the way through them. A larami is much like a stefan, it has a hole in the back of the dart that allows a pocket of air to hit instead of it going through a drilled hole and hitting the head of the dart. About 1/4 of a larami is the hole, the rest is soild foam.

Edited by Uncle Hammer, 26 May 2006 - 07:31 PM.

[meiser5]

What if I found a way to fill the dart up with some lightweight air proof material so a small air pocket could form?
Caulking might work....

EDIT///What if i was to just block the hole towards the middle where the air pocket hole end, i would be saving weight and time, would this throw the dart off. I will be going to the store this Sunday anyway to test it out so does anyone have any suggestions on why that might not work.

Edited by meiser5, 28 May 2006 - 04:15 PM.

[Bone]

I beleive caulking would be just a tad to heavy.

[WratH]

Before I Knew What I Was Doing™, I tried to fill a stock dart with caulking. Bad idea. Way too heavy, makes a huge mess and puts the dart off weight. You will end up with one less dart in your arsenal. Don't bother.