Jump to content


Photo

C02 Gun!


13 replies to this topic

#1 Shadow knuckles

Shadow knuckles

    Member

  • Members
  • 15 posts

Posted 19 April 2006 - 07:22 PM

i just was bored out of my mind so i decided to thow together a few things and make a c02 gun. i found an old c02 bike pump some duct tape, vinyl tubing, and copper pipe threw it all together and presto!!!

Posted Image

Posted Image

Posted Image

tell me what you think!

Edited by Shadow knuckles, 19 April 2006 - 07:25 PM.

  • 0
only three things it takes to modify a nerf gun...


hard work...

determination...

and lots and lots of duct tape.

#2 wick817

wick817

    Member

  • Members
  • 49 posts

Posted 19 April 2006 - 07:33 PM

Thats quite interesting. Its a nice concept.
What are the ranges you are getting?
If there good ranges you could make a rifle, I think that would be cool.
  • 0
This is funny
My freind: You cant hit from there
Me:Yes i can... BANG(from my singled AT2K)
My friend:OOOWWWWW My arm.

#3 Petrie

Petrie

    Member

  • Members
  • 39 posts

Posted 19 April 2006 - 07:33 PM

What are the ranges like? Does it take a 12 OZ co2 canister? What are the number of shots per canister??
  • 0

#4 Shadow knuckles

Shadow knuckles

    Member

  • Members
  • 15 posts

Posted 19 April 2006 - 07:38 PM

i havnt had a chance to test it out yet cuz i made it half an hour ago but i have high hopes for it. the trigger is a little small and that makes it a little wierd to hold but otherwise it fits in my hand pretty well

Edited by Shadow knuckles, 19 April 2006 - 07:59 PM.

  • 0
only three things it takes to modify a nerf gun...


hard work...

determination...

and lots and lots of duct tape.

#5 AssassinNF

AssassinNF

    Member

  • Members
  • 904 posts

Posted 19 April 2006 - 08:01 PM

Please fix your grammar.

Anyway, it looks good, and I'm curious as to what the ranges are. If you can get some brass or some good PVC, you might want to use that as the barrel instead of copper. Copper doesn't work very well...
  • 0

Probably dead by now, or something.


#6 davidbowie

davidbowie

    Member

  • Members
  • 422 posts

Posted 19 April 2006 - 08:04 PM

My experience with those says that the flow is atrocious, but that might not matter so much with a nerf gun. I look forward to range testing.
  • 0
Check out the all-new DBNerf. The source for all your DBNeeds.

#7 Shadow knuckles

Shadow knuckles

    Member

  • Members
  • 15 posts

Posted 19 April 2006 - 09:21 PM

thanks for your input. i hope to do some testing tomorrow.
i just need some stefans and co2.


its got glue on it right now and needs to dry.

Edited by Shadow knuckles, 19 April 2006 - 10:12 PM.

  • 0
only three things it takes to modify a nerf gun...


hard work...

determination...

and lots and lots of duct tape.

#8 KnightValor

KnightValor

    Member

  • Members
  • 39 posts

Posted 19 April 2006 - 10:23 PM

... You mean you posted a thread about a gun you know nothing about and whipped it together in half an hour??


First part: LAME.
Second part: Maybe I should build one of these... :D


Looks awesome... Simple, and you already have suggestions for modifications! :wacko:
  • 0
Newbie... But one that uses the search button ^_^

#9 Shadow knuckles

Shadow knuckles

    Member

  • Members
  • 15 posts

Posted 19 April 2006 - 10:46 PM

good point. i shouldnt have posted a thread about a gun i havnt tested yet but like i said before i had the parts just layin around and i was bored.


btw~ thanx for the good input. im glad you like it :wacko:
  • 0
only three things it takes to modify a nerf gun...


hard work...

determination...

and lots and lots of duct tape.

#10 NirvanaScorpion

NirvanaScorpion

    Member

  • Members
  • 120 posts

Posted 20 April 2006 - 07:24 PM

I like how you incorporated C02 with a small pistol type gun (I know its been done before but I like it), also I like its simple look, I also look foward to range testing.

Edited by NirvanaScorpion, 20 April 2006 - 07:24 PM.

  • 0
"If rock n rolls illegal throw my a** in jail" - Kurt Cobain

Guitar Heroes-Jimmy Paige, Eric Clapton, Jimi Hendrix, Kurt Cobain

Newly Found(thanks General)-Yngwie Malmstein, this guy is an accoustic expert.

#11 Shadow knuckles

Shadow knuckles

    Member

  • Members
  • 15 posts

Posted 20 April 2006 - 08:09 PM

the only bad thing about it so far is that the handle isnt tilted. it wouldve been easier to hold if it were.
  • 0
only three things it takes to modify a nerf gun...


hard work...

determination...

and lots and lots of duct tape.

#12 KirbySaysHi

KirbySaysHi

    Member

  • Members
  • 100 posts

Posted 21 April 2006 - 03:05 AM

I'd like to add, that when I've delt with CO2, it tends to be inneficient directly out of the cartridge (the cold temperature decreases the available pressure). That's why I THINK (I'm not sure) most paintball guns have an expansion chamber between the barrel, tank, and trigger; to allow the compressed air to warm up, even slightly to give more efficient pressures. But I could be wrong about this. What I'm saying, is that if the flow is horrible, or you find yourself using a lot of CO2 per shot, try creating an expansion chamber with another valve as a trigger. When I turned a Brass Eagle Ghost (I think it was called that) into a Nerf gun (inspired by Yakkman), I remember getting about 30 shots per cartridge, each shot going about 90 feet on the average, and most of my stefans getting blown apart from the excess force. So that demonstrates the potential of a CO2 powered gun...

Good luck, and brass all the way!
  • 0
Kids in the backseat cause accidents... Accidents in the backseat cause kids.

#13 ompa

ompa

    Introductinator

  • Moderators
  • 2,368 posts

Posted 21 April 2006 - 07:37 AM

Love the idea. You know what else I love? People who use capitalization.

~ompa
  • 0

#14 Shadow knuckles

Shadow knuckles

    Member

  • Members
  • 15 posts

Posted 29 April 2006 - 09:48 PM

Well...
i put some co2 in the thing, and then a stefan. Surprise surprise... the stefan didnt fit. The barrel was too big. I found some smaller black pvc in my basement that fits some stefans a friend made me. Pics to be posted later with ranges.

Edited by Shadow knuckles, 29 April 2006 - 09:48 PM.

  • 0
only three things it takes to modify a nerf gun...


hard work...

determination...

and lots and lots of duct tape.


2 user(s) are reading this topic

0 members, 2 guests, 0 anonymous users