My WildFire wasn't pumping so I opened it up and it turned out that the clamp that kept the bladder from leaking was broken into three pieces. I used plastic hobby glue to put it back together but that is not working. Are there any ways to fix my problem? Also is it possible to buy the things that seal the bladder?
~Nerfgunner
9 replies to this topic
#2
TimberwolfCY
-
- Members
- 249 posts
Member
Posted 12 April 2006 - 09:15 AM
"Denial is the most predictable of all human responses. But, rest assured, this will be the sixth time we have destroyed it, and we have become exceedingly efficient at it." - The Architect, The Matrix: Reloaded
TimberwolfCY
of NH, NHQ, NO, NC
TimberwolfCY
of NH, NHQ, NO, NC
#3
nerfgunner
-
- Members
- 27 posts
Member
Posted 12 April 2006 - 09:41 AM
No thats not it I'm talking about the plastic thing that attaches to the thing that is covering the bladder.
#4
J cobbers
-
- Members
- 586 posts
Member
Posted 12 April 2006 - 10:34 AM
That's really undescriptive. Do you mean the clear clamp at the front of the bladder or the yellow one with a valve at the back of it? A metal hose clamp can be used to fix either end.No thats not it I'm talking about the plastic thing that attaches to the thing that is covering the bladder.
Edited by J_cobbers, 12 April 2006 - 10:40 AM.
Don't forget to eat your meat based vegetable substitute children.
#5
nerfgunner
-
- Members
- 27 posts
Member
Posted 12 April 2006 - 10:54 AM
The clear one that is very difficult to put on and has four screws. It is located in the front of the bladder.
#6
skiermon
-
- Members
- 16 posts
Member
Posted 12 April 2006 - 12:12 PM
How about some pics?
And if I'm thinking about the piece you're talking about, maybe you could take one off another busted wildfire, rf20, or PC...Basically anything with an air bladder attached in a similar way.
And if I'm thinking about the piece you're talking about, maybe you could take one off another busted wildfire, rf20, or PC...Basically anything with an air bladder attached in a similar way.
#7
murakumo32
-
- Members
- 419 posts
Member
Posted 12 April 2006 - 01:14 PM
You're talking about the clear bottle shaped thing that surrounds the bladder, right? If so: epoxy & duct tape is good.
QUOTE
Nerfing, now fortified with vitamin C!
-or-
100% Nerf, for 100% pwnage.
-or-
100% Nerf, for 100% pwnage.
QUOTE
Nerf is a neutral weapons dealer. Anyone coughing up the dough can get armed.
QUOTE
and they're made of Foam... which makes them very Nerfy...
#8
nerfgunner
-
- Members
- 27 posts
Member
Posted 12 April 2006 - 01:27 PM
The clamp that attatches (sp?) to that.
#9
J cobbers
-
- Members
- 586 posts
Member
Posted 12 April 2006 - 01:45 PM
Cut off the plastic clamp, you won't be able to glue it back together. Buy a metal hose clamp and use it in place of the plastic one, Just like the third picture in the mod that TimberwolfCY linked to. You can clamp either end, Timberwolf just decided needed to clamp both. I've done pretty much the same thing on my own Wild fire.
Don't forget to eat your meat based vegetable substitute children.
#10
tautvis24
-
- Banned
- 4 posts
Member
Posted 18 February 2008 - 11:06 AM
after reading your problem i thought a bike tire tube fix kit type thing might work
good luck
good luck
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
