5 replies to this topic

[Team Slaya]

As the title might suggest, my Crossbow is acting up. I finally got to modding it, and I did it right, with proper glue and such. I did a coupler to coupler mod like the one in the mods section of NH, but that isn't the problem. The problem that I'm having is with the catch. It's catching, but even when I push the trigger all the way into the case, it still doesn't fire. Three different times I unscrewed, set the catch back in it's place, and screwed it back together, but the same thing happened each time. Any ideas how to remedy this? Thanks.

TS

[nerfer34]

Is the plunger catch in the right spot?

[Team Slaya]

I believe I said that, but yes, according to the pictures it's in the correct spot.

TS

[Uncle Hammer]

I believe in the write up rawray makes a more efficient catch. Try doing that. He makes a triangular shape and put's it on the trigger to make it catch better.

Edited by Uncle Hammer, 11 April 2006 - 05:37 PM.

[Team Slaya]

Thanks Hammer. I had actually looked at that, but he said that you had to push the trigger flush with the case to fire it. Mine doesn't fire at all. I'll try doing that, however. I don't have any sheet metal like that though. Is there anything else I could glue on there that would do the trick?

TS

[Uncle Hammer]

Something tough like plastic. Get creative I guess.