Some Stefan Questions
#1
Posted 03 April 2006 - 07:30 PM
#2
Posted 03 April 2006 - 07:32 PM
...and ideas are bulletproof. "
#3
Posted 03 April 2006 - 07:42 PM
#4
Posted 03 April 2006 - 07:57 PM
Take your dart to Lowes, Home Depot, etc, and try out different barrels. You might want to try cpvc, sch. 80 pvc, copper piping, and variouse sizes of brass.
#5
Posted 04 April 2006 - 04:24 PM
#6
Posted 04 April 2006 - 04:41 PM
#7
Posted 04 April 2006 - 04:44 PM
Website: www.freewebs.com/teamstealthnerf
-Check it out and vote in our poll!
#8
Posted 04 April 2006 - 05:36 PM
#9
Posted 04 April 2006 - 05:38 PM
Website: www.freewebs.com/teamstealthnerf
-Check it out and vote in our poll!
#10
Posted 04 April 2006 - 05:46 PM
By the way iam using a NF EX-3.
Edited by nerfgunner, 04 April 2006 - 05:46 PM.
#11
Posted 04 April 2006 - 05:50 PM
Website: www.freewebs.com/teamstealthnerf
-Check it out and vote in our poll!
#12
Posted 04 April 2006 - 05:50 PM
lilsniper, he means to barely bend the barrell at the top, so the dart will not fall through the barrel.
Edited by hokiefan0705, 04 April 2006 - 05:52 PM.
#13
Posted 04 April 2006 - 05:52 PM
#14
Posted 04 April 2006 - 05:55 PM
#15
Posted 04 April 2006 - 05:56 PM
#16
Posted 04 April 2006 - 05:58 PM
#17
Posted 04 April 2006 - 06:06 PM
Ha...my micro Stefans are so tight in 1/2" CPVC that I can't use it as a blowgun. I play trombone, started playing saxophone, and can ride a mile in less than two minutes on my bike, by the way, to tell you what my lung power/capacity is. If you still don't get it, with one whole breath, I can almost fully inflate a ballon. I'm not so sure if 10" of the stuff would be good for a singled AT3k anymore...
#18
Posted 04 April 2006 - 06:14 PM
Edited by lilsniper, 04 April 2006 - 06:14 PM.
Website: www.freewebs.com/teamstealthnerf
-Check it out and vote in our poll!
#19
Posted 05 April 2006 - 03:44 PM
Edited by nerfgunner, 05 April 2006 - 04:00 PM.
#20
Posted 05 April 2006 - 04:43 PM
Most people find that brass works well: 17/32 inch, or 9/16 inch are used for 1/2 FBR.
But, if you can find another material, go ahead and use it. Your darts should fit snug enough that they don't fall out, but loose enough to be blown out by lightly blowing into the tube.
For a NightFinder, I'd suggest take two inches of 17/32 inch brass, and put that two inches inside of 3 1/2 inches of 9/16 inch brass. Take that brass assembly, and nest it onto the end-cap of the plunger.
Here's some really easy mods:
http://www.nerfhq.co...view.php?p=7703
http://www.nerfhq.co...iew.php?p=26566 NOTE: Six inches of brass is too long: the longest I'd suggest is 4 1/2 inches,a nd no longer.
I hope that helped a bit.
Sincerely,
Pat
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users