Jump to content


Photo

Brass Warthog Write-up

What? A real warthog write-up?

5 replies to this topic

#1 Renegade

Renegade

    Member

  • Members
  • 536 posts

Posted 31 March 2006 - 12:14 AM

Renegade’s Brass Warthog Mod Write-up

Materials:
A Nerf Warthog
Hot glue gun with glue
Dremel with sanding bit
17/32 brass ( two 3-4 inch pieces)


Step one: Unscrew all of the screws on the Warthog. Be careful opening it, as the parts may shoot out once opened. Your internals should look like this.
Posted Image

This is where the springs are.
Posted Image

Step two: Take out the plunger/barrel assembly.
Posted Image

Step three: Cut off the orange air restrictors at the base of each. The assembly is very fragile, so I wouldn’t rip them out by hand.
Posted Image

Step four: Sand down the ridges here, enough for the brass to fit nicely in the piece where the air restrictors were.
Posted Image

Step five: Glue your brass barrels onto the very small orange stub. Place glue where the brass meets plastic. Be sure that no glue goes over the edges, which will prevent the gun from firing properly.
Posted Image

Step six: Put everything back together. Much easier said than done. You should place the end piece with the cocking handle on first. Be sure that the white piece is situated by the catch mech spring. (The small one) Then insert the barrel/plunger assembly while holding the rest down. Hold the cocking handle down while you place the top casing on like so.
Posted Image

And your gun should make a much meaner sound when fired without any ammo. It will shoot dart tag darts now, and stefans with MUCH better accuracy and range.

I will post ranges tomorow sometime.
  • 0

#2 Falcon

Falcon

    Velcro'd Beanpole

  • Members
  • 1,375 posts

Posted 31 March 2006 - 01:21 AM

Very nice...

You say 17/32" brass? You mentioned dart tag darts...are you converting darts too?

Again, good work. I've never seen a write-up for the wharthog. The Haven is pumping out quality mods like nobody's business...
  • 0
----------||||||||)
QUOTE(Ilùvatar @ 0000) View Post
Of the theme that I have declared to you, I will now that ye make in harmony together a Great Music.

#3 Renegade

Renegade

    Member

  • Members
  • 536 posts

Posted 31 March 2006 - 01:32 AM

What I mean is that stock, the pegs are too big to fit dart tag darts, but with 17/32 there's obviously no peg and it can fire stock dart tag darts.
  • 0

#4 Rip32

Rip32

    Member

  • Members
  • 177 posts

Posted 31 March 2006 - 03:30 PM

It looks sexy. Very nice mod, and write-up, but it would be nice to see a picture of the gun assembeled, even though I can basicly picture it in my head.

Edited by Rip32, 31 March 2006 - 03:31 PM.

  • 0
http://www.break.com...iencechild.html
Funniest video ever. This kid needs some serious help

#5 nerfer34

nerfer34

    Member

  • Members
  • 1,594 posts

Posted 31 March 2006 - 03:42 PM

What are ranges? Looks nice.
  • 0
<!--quoteo--><div class='quotetop'>QUOTE</div><div class='quotemain'><!--quotec-->God Damn it Groove, you stole my kill.<!--QuoteEnd--></div><!--QuoteEEnd-->-OMC

#6 Renegade

Renegade

    Member

  • Members
  • 536 posts

Posted 31 March 2006 - 06:25 PM

Ranges, right now I'm constantly hitting 60' with dart tag darts from both barrels.

Posted Image

Posted Image
  • 0


1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users