17 replies to this topic

[NirvanaScorpion]

Every body has been posting dollar store guns, so I went there and all they had were the noisemaker guns, behind one though there was a Fei Kiang Gun its green and black and shoots the foam arrows. but there a bit fatter in width and maybe a BIT smaller in length. I dont have ranges right know, but if anyone has this gun please post a pic or th ranges. I am using the foam arrows, and for it to go REALLY FAR I used the glow in the dark whiute bullets that use with the firefly (like megas) (its a pump action, pull back, loaded push it foward shot. ANyone?

[sistermol]

could you please further more clearly describe it?

I might be able to help.

[AssassinNF]

glow in the dark whiute bullets that use with the firefly (like megas)

Ummm.. the Firefly bullets are MICROS.

Anyway, describe the gun better or post a picture. Some ranges would help when you get them. It sounds like an interesting gun.

Learn how to post pics here.

[NirvanaScorpion]

Yea, Ill try. Ok, the body is green, while the pumper is black, you push it foward, then you pull back fast for it to shoot. Now the arrows flat range is about 20' , I have gotten it to go 28" and as Im getting better I have flat ranges off 25' to 28' , but with megas with enough pressure it can shoot them about 69' and up. it also has two adjustable arrow holders above the fake trigger on the top of the barrel. It also has a fake tube going towards the top of the gun. it has a fat uncovered poeg to load the arrows, and as I said with some twisting the megas can fit. I hope that helps.

EDIT: Sorry about the misunderstanding, the "megas" Im talking about are actually micros, thanks again assasin. And also the writing is in script, and I hate scriptl, this gun mightbe a Fei Kiang or a Fei Xiang

Edited by NirvanaScorpion, 26 March 2006 - 05:09 PM.

[AssassinNF]

69' is good range, but it sounds like the firing mechanism is a little akward like a manual. Is it accurate?

We need a pic before anyone can really recognize the gun.

[NirvanaScorpion]

Oh no, youre completely right. its COMPLETELY manual, thats what sucks. But its also pretty good that youre fastness adds feet. But the accuracy is maybe 76%...not that good. Thats why if people recognize it, they might have some things up theire sleeves.

[davidbowie]

Fei Xiang sounds right. I have a dollar store TTG knockoff also made by fei xiang. It's pretty nice. The writing was in script too. I think we may be on to a decent company here.

[NirvanaScorpion]

Definetly, but does my description fit your gun?

[Carbon]

DB's dollar store gun is quite literally a TTG knock-off, right down to the shape. He has a picture of it up in the "Arsenal" thread. Sounds like you found a different model. I think I'm gonna have to hit up a few dollar stores and see that I can find around here...

[NirvanaScorpion]

ALright, thanks alot. And thanks for the pic, but yea It is a different model. Good Luck with your DS raids. But now Im pissed, how stupid this might be I think it has potential. Im on paint right now sketching up a diagram.

[murakumo32]

Try a reverse plunger and trigger 'mod'. I am assuming that the assembly is like a pump gun except without an air tank. Well I suggest that you open it, add a spring onto the front end since the plunger goes the other way, and fabricate a sort of trigger and handle, and reassemble it. Voila, one practical gun with nice ranges. The weird part might be priming the gun in a forward motion instead of a backwards one.

EDIT: Sorry, I forget that people can't read mind, wouldn't that make life easier?

Anyways, is the plunger located behind the barrel or under it? In either case, try to add a trigger mechanism to it, can't be too hard with a clothespin trigger

Edited by murakumo32, 26 March 2006 - 08:31 PM.

[NirvanaScorpion]

Well the back pump is working ok, and yea its not an air tank but it is like an pump gun, I am sorta klost with what youre trying to explain though, also any instructions for posting pics?

[GeneralPrimevil]

Learn how to post pics here.

That was only a few posts above your post...

Edited by GeneralPrimevil, 26 March 2006 - 08:35 PM.

[NirvanaScorpion]

Sorry about that breech of stupidness about the pics, Here we go, hope this helps, just go here

Please just help me out on this one at least,m I posted this but its very small and I labeled stuff for description if anyone could help

Edited by NirvanaScorpion, 26 March 2006 - 08:44 PM.

[murakumo32]

Okay, maybe add a spring at the front end of the pump and add a trigger assemble near the front too. It looks as though you might want to cut the original handle off. Cut the existing barrel (maybe) and add some cpvc/brass/pvc/whatever to it. Hey if you make it right, it could technically be considered bullpup, eh?

[NirvanaScorpion]

Lol, I have no idea, Im just trying to add some accuracy and pop into this gun, and I really wanna enchance that damn mocking pic

[NirvanaScorpion]

DELETED

Edited by NirvanaScorpion, 01 April 2006 - 05:48 PM.

[NirvanaScorpion]

There we go for a bigger picture, sorry about the double post glitch thing on this page, but here.

Edited by NirvanaScorpion, 01 April 2006 - 05:47 PM.