No replies to this topic

[Hotness]

Hey I used this mod as a base for mine:
Double Barrel NF

I don’t have pictures at the current moment but hope to soon.

1. I cut out the airflow restrictors
2. I opened up my gun and removed all of the wiring to the sight.
3. I cut down the end of my gun like this:
http://images.snapfi.....<677549nu0mrj

4. I used two 1 inch pieces of 1/4 inch vinyl tubing for the new airflow.
5. I used plumbers epoxy to seal the gun around the tubing and then to the new barrels.
6. I used two 10 inch sections of 1/2 inch PVC with crayola markers inside them for the barrels.
7. Finally I wraped the gun in electrical tape (red & black) to give the gun more body, and so that the color scheme on the gun matched throughout (no Frankenstein, half-blue/yellow, half-PVC)