5 replies to this topic

[frenzybob3]

Ok im bad at paint so bear with me here.



Key
1. Nf
2.1 1/2 inches of 1/2 cpvc
3. 1/2 cpvc coupler
4. 1/2 of 1/2 cpvc for spacer
5&6. 2 inches of 1/2 cpvc for barrel
7. Same as 4

Well this idea hit me one day, this mod is to help increase the rof of your nf.

How it works, it works the same as a normal cpvced nf but instead of pushing the dart into the barrel then shoot. All you need to do is pull the barrel that has just been shoot out of the coupler and replace the barrel with a one that has a stefan or stock dart in it. For me to get good range i use 2 bands on it, or i guess you could replace the spring. Well hope you like it!


-jake

[CustomSnake202]

That's a pretty good idea. I did something similar back in the day with my NF, but I used drilled-out at3k barrels for my shells:

I just had to put some masking tape over the outside of my 9/16 brass in order for the at3k barrels to fit tight. It should work wonders in wars when your on the run and need a quick reload.

People have many different variations of this kind of barrel set up. I've seen people with three long barrels made out of pvc glued together to fit their Xbow for good rof just to name one. Good thinking with the cpvc/NF setup though. It should work. Just use tough glue when gluing the mini barrels together.

[frenzybob3]

Yep thanks. That was a good idea of yours. To glue it i use alot of hotglue and e-tape.



-Jake

[euphemism]

Reminds me off the "chain-fed" NF be Sqiggs. (link'd)

[Mattf]

I was thinking about a bolt-action clip system with brass, but I decided it would be uncomfortable to use and you could probably work faster just by muzzleloading it...

[ompa]

The thing is with a nerf bolt-action clip pistol is that the pistol becomes so unwieldy that it would lose its function as a sidearm, as there'd be no way to holster it.

Unless you built the gun from the ground up, made 0.8" long darts, and designed the gun for the clip to go in the handle.

~ompa