Jump to content


Photo

Frenzybob's Clipped Nf


5 replies to this topic

#1 frenzybob3

frenzybob3

    Member

  • Members
  • 22 posts
  • Location:Davenport, Iowa

Posted 05 March 2006 - 10:23 PM

Ok im bad at paint so bear with me here.

Posted Image

Key
1. Nf
2.1 1/2 inches of 1/2 cpvc
3. 1/2 cpvc coupler
4. 1/2 of 1/2 cpvc for spacer
5&6. 2 inches of 1/2 cpvc for barrel
7. Same as 4

Well this idea hit me one day, this mod is to help increase the rof of your nf.

How it works, it works the same as a normal cpvced nf but instead of pushing the dart into the barrel then shoot. All you need to do is pull the barrel that has just been shoot out of the coupler and replace the barrel with a one that has a stefan or stock dart in it. For me to get good range i use 2 bands on it, or i guess you could replace the spring. Well hope you like it!


-jake
  • 0
Its not the size of the dog in the fight its the size of the fight in the dog.


Duh im gangster just look at my nerf gun.

#2 CustomSnake202

CustomSnake202

    Member

  • Members
  • 506 posts

Posted 05 March 2006 - 10:39 PM

That's a pretty good idea. I did something similar back in the day with my NF, but I used drilled-out at3k barrels for my shells:
Posted Image
I just had to put some masking tape over the outside of my 9/16 brass in order for the at3k barrels to fit tight. It should work wonders in wars when your on the run and need a quick reload.

People have many different variations of this kind of barrel set up. I've seen people with three long barrels made out of pvc glued together to fit their Xbow for good rof just to name one. Good thinking with the cpvc/NF setup though. It should work. Just use tough glue when gluing the mini barrels together.
  • 0

#3 frenzybob3

frenzybob3

    Member

  • Members
  • 22 posts
  • Location:Davenport, Iowa

Posted 05 March 2006 - 10:44 PM

Yep thanks. That was a good idea of yours. To glue it i use alot of hotglue and e-tape.



-Jake
  • 0
Its not the size of the dog in the fight its the size of the fight in the dog.


Duh im gangster just look at my nerf gun.

#4 euphemism

euphemism

    Member

  • Members
  • 262 posts
  • Location:75 Edge Hill Road, Milton, MA

Posted 05 March 2006 - 11:04 PM

Reminds me off the "chain-fed" NF be Sqiggs. (link'd)
  • 0

#5 Mattf

Mattf

    Member

  • Members
  • 41 posts

Posted 08 March 2006 - 09:41 PM

I was thinking about a bolt-action clip system with brass, but I decided it would be uncomfortable to use and you could probably work faster just by muzzleloading it...
  • 0

#6 ompa

ompa

    Introductinator

  • Moderators
  • 2,368 posts

Posted 08 March 2006 - 09:45 PM

The thing is with a nerf bolt-action clip pistol is that the pistol becomes so unwieldy that it would lose its function as a sidearm, as there'd be no way to holster it.

Unless you built the gun from the ground up, made 0.8" long darts, and designed the gun for the clip to go in the handle.

~ompa
  • 0


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users