4 replies to this topic

[CrooKeD]

I recently purchased a used blastfire. I got it home and tested it only to find out the first shot goes off without a hitch but the remaining 4 shots don't leave the barrel until I've pulled the trigger around five times after the first shot. I opened it up and tried to see what the problem is and compared it to the opened BF in the mods section and realized I was mssing two things.

http://img508.images...ingpiece1tq.jpg

Also when the remaining four shots leave the barrel they go a lousy 2-4 feet with the first one going approx. 20 feet. any reason for this and any help to fix it would be greatly appreciated.

Edited by HExEN, 28 February 2006 - 01:28 AM.

[The Trouble]

That mechanism is completely necessary for semi-auto firing. You're going to have to fabricate a new one completely, or find someone with spare Blastfire parts.

If you can't get that part, all is not lost. Use the blast button on the top to fire all barrels at once. If you use a bit of ingenuity you may be able to get the button pressed with a trigger pull.

[CrooKeD]

Thats the bad news I didn't want to hear. In that case if anyone here has any spare BF parts lying around(obviously the ones I'm missing) then send me a message.Willing to agree on a fare price if needed.

[SG Pilot]

Hornets are very similar to BFs. I'm sure the Hornet might have what you need, but then the question is, will the Hornet's work inside the BF? I say this because I have two dead Hornets I screwed up on my shelf.

[CrooKeD]

I have a hornet but do not wish to remove parts from it. If there is anoyone out there with Blastfire parts please message me.