Jump to content


Photo

Sawtooth Mod: Big Clip

(A 15-dart-Clip! Like No Way!)

22 replies to this topic

#1 baghead

baghead

    Cheetos

  • Members
  • 1,366 posts
  • Location:SoCal
  • State:California
  • Country:United States
  • Mad Artisan Labs on Youtube

Posted 01 February 2006 - 11:31 PM

I just don't stop producin the mods folks:

Here it is, my Sawtooth:

Posted Image

Some of you may recall me mentioning this gun and refrenceing it as the SHWATOOTH, that was because shwa, a member of my clan owned it for a while, but he traded it back to me for a DTG (he said it didn't work all that good) so I took it back and went to town on it. I did a spring replacement, and cleaned up the clip a little more.

The Specs:

Gun: Nerf Sawtooth

Spring: SM 350, yes it's actualy a better spring than the stock sawtooth one.

Clip: 3 Sawtooth clips fused together, crayoled to shoot micros.

here's a pic of the clip:

Posted Image

I'll try to get more detailed pics of the clip soon, my camera is being iffy right now.

Ranges for the BC sawtooth:

Stock TAgger Darts:

Flat average 45-55 feet

angled average 60-70 feet

Micro stefans:

Flat Average: 40-50 feet

Angled average: 55-65 feet

I know it's strange that the stefans produced less range, but i think that is due to the fact that my stefans are a little small for crayola barrels.

-bags

Edited by baghead, 09 February 2006 - 08:07 PM.

  • 0

Don't call it a comeback, I never left.


#2 Forsaken angel24

Forsaken angel24

    Member

  • Contributors
  • 2,471 posts

Posted 02 February 2006 - 12:08 AM

Sweet job man. The clip looks a little bent. Have you done anything to help prevent it from jamming? What are the ranges?
  • 0
I don't get my kicks out of you,
I don't feel the way I used to do.
I know its bad,
After what we had,
But Iím just not the angel you knew.

#3 baghead

baghead

    Cheetos

  • Members
  • 1,366 posts
  • Location:SoCal
  • State:California
  • Country:United States
  • Mad Artisan Labs on Youtube

Posted 02 February 2006 - 12:21 AM

the bend is mainly from the angle of my camera, It took alot of work to keep this thing from jamming, but now i have it really clean along the edge that makes contact with the sawtooth itself and it works quite well. the only jamming problems i'm running into come during the last couple of shots because the clip is a little heavy.
  • 0

Don't call it a comeback, I never left.


#4 powerclip

powerclip

    Member

  • Banned
  • 42 posts

Posted 02 February 2006 - 04:05 AM

Holy Shit!!!! Where did you come up with that? You gotta start a topic on how to make it.
I want one!!!! ^_^

Edited by powerclip, 02 February 2006 - 04:06 AM.

The point of war is not to die for your country, it's to make the other poor bastard to die for his.

#5 Jangadance

Jangadance

    Member

  • Members
  • 676 posts

Posted 02 February 2006 - 04:31 AM

Next you'll need to coax even decent spring-pistol range out of that sucker, then I'll be pleased.

The Sawtooth has a small plunger tube and poor seals, not to mention the spring is mediocre at best. I hope you're getting good performance from it now, it looks good and the larger clip would make it more useful in battle.
  • 0
"The 'dance goes on..."

#6 One Man Clan

One Man Clan

    TOFTS

  • Contributors
  • 2,170 posts
  • State:New Jersey
  • Country:United States

Posted 02 February 2006 - 07:15 AM

Holy Shit!!!! Where did you come up with that? You gotta start a topic on how to make it.
I want one!!!! cool.gif


How are you still here? And how have you made 36+ posts?

Edited by One Man Clan, 02 February 2006 - 07:15 AM.

  • 0
I hate you.

#7 powerclip

powerclip

    Member

  • Banned
  • 42 posts

Posted 02 February 2006 - 08:04 AM

sorry!!! All the posts that are rude my brother did but he's going to Canada so that won't be a problem. Why is it only you who always says bad things about me? No one else does, Why do you?

Edited by powerclip, 02 February 2006 - 08:05 AM.

The point of war is not to die for your country, it's to make the other poor bastard to die for his.

#8 CheeseNerfer

CheeseNerfer

    Member

  • Members
  • 246 posts
  • Location:Seattle, WA

Posted 02 February 2006 - 10:56 AM

I think we've heard that sibling excuse a million times by now. Just fess up and admit that sometimes you can be a n00b. Anyway thats an awsome mod, could you post some ranges and rof. My friend has a sawtooth that he hates and if this mod improves range maybe I'll try it.
  • 0
"Ahh The Power Of Cheese"


#9 powerclip

powerclip

    Member

  • Banned
  • 42 posts

Posted 02 February 2006 - 11:50 AM

Yeah I know that but basicly every post I do he says stuff about me and it isn't fair. No one does it to him, so just keep your comments to YOURSELF!!!!
(Not you cheesenerfer).

Great mod though, very impresive :D
The point of war is not to die for your country, it's to make the other poor bastard to die for his.

#10 J cobbers

J cobbers

    Member

  • Members
  • 586 posts
  • Location:Fort Hood, TX
  • State:Texas
  • Country:United States

Posted 02 February 2006 - 12:13 PM

Yeah I know that but basicly every post I do he says stuff about me and it isn't fair. No one does it to him, so just keep your comments to YOURSELF!!!!
(Not you cheesenerfer).

Great mod though, very impresive :D


No body says shit to One Man Clan for several reasons here is an outline of why:
I) He doesn't give us a reason to

A) OMC doesn't Make stupid posts, this includes;
1) not acting like a newbie
2) following the code of conduct
3) not blamining bad posts on friends and siblings
a) not letting friends and siblings have access to his account on this forum
b) if he had friends and siblings on the forum, I'm sure he'd ask them to get
their own account and user name

B) OMC tries to point out bad conduct by new members
1) Believe it or not this includes you.
2) He's not the only one that does it
a) Other people who do this include our moderators and site admins.
i) these people can ban you for not following the rules and being obnoxious.
ii) these people like OMC because he is a good member

II) OMC is a long time member and contributer to this site

A) look at his member number and when he joined. This site has only been up a
few years.

B) OMC is one of the few members who occasionally gets some direct information
from hasbro. (correct me if I am wrong I believe it's him and Talio yes?)
1) Which he shares with us
a) We like getting this news.

C) OMC is an active nerfer, and modder.
1) Again he shares his mods and thoughts which help out the rest of us.

So in short, we don't give him shit because he doesn't deserve it. If you want respect here, earn it like everyone else. Don't whine about him saying stuff about you, when you've only been here a short time and have yet to make a good impression. Do something cool and impressive, and don't act like a child and maybe you'll find some respect.

Edited by J_cobbers, 02 February 2006 - 12:16 PM.

  • 0

Don't forget to eat your meat based vegetable substitute children.


#11 Talio

Talio

    Not your mother

  • Contributors
  • 2,781 posts

Posted 02 February 2006 - 02:11 PM

Yeah I know that but basicly every post I do he says stuff about me and it isn't fair. No one does it to him, so just keep your comments to YOURSELF!!!!
(Not you cheesenerfer).

Great mod though, very impresive :D

Dude, you make one more lowsy post and you're gone. Cool it.

Talio.
  • 0
New posts on my blog, check it out. - Click on the ad too, cause I get money per click. Give back to the Admin team for once!

#12 baghead

baghead

    Cheetos

  • Members
  • 1,366 posts
  • Location:SoCal
  • State:California
  • Country:United States
  • Mad Artisan Labs on Youtube

Posted 02 February 2006 - 03:25 PM

BACK ON TOPIC:

here's another pic of the clip:

Posted Image

I'm having a hard time getting my camera to focus on the details of this clip still but as you can see it's not that hard to do, it just takes paitence, hot gule, a steady hand and an x-acto knife.

Edited by baghead, 02 February 2006 - 03:28 PM.

  • 0

Don't call it a comeback, I never left.


#13 SirTofu

SirTofu

    Member

  • Members
  • 424 posts
  • Location:Decatur, Ga

Posted 02 February 2006 - 04:27 PM

Im curious, what are the ranges? I know Sawtooths have cruddy range, but did the range improve at all?
  • 0
Nobody online Nerfs in the SE :(

#14 baghead

baghead

    Cheetos

  • Members
  • 1,366 posts
  • Location:SoCal
  • State:California
  • Country:United States
  • Mad Artisan Labs on Youtube

Posted 02 February 2006 - 04:39 PM

it did improve range, but i need to do some serious tests before i actualy post any.
  • 0

Don't call it a comeback, I never left.


#15 Starbuck

Starbuck

    Member

  • Members
  • 304 posts
  • Location:Tennessee

Posted 02 February 2006 - 07:03 PM

Well done, Baggie.

I've done this with two clips before, I felt three was somewhat cumbersome. Might I suggest a Monoblast(shot?) spring for the Sawtooth. That's what I did with mine and it gets much better ranges and adds some surprising zip. Again, well done.
  • 0
Starbuck, The Noid,
Artemis Arms Armory


#16 baghead

baghead

    Cheetos

  • Members
  • 1,366 posts
  • Location:SoCal
  • State:California
  • Country:United States
  • Mad Artisan Labs on Youtube

Posted 03 February 2006 - 06:16 PM

I'm wondering would anyone be interested in purchaseing this badboy? I have no real use for it and i was considering eBaying it. would anyone buy it?
  • 0

Don't call it a comeback, I never left.


#17 SirTofu

SirTofu

    Member

  • Members
  • 424 posts
  • Location:Decatur, Ga

Posted 03 February 2006 - 06:52 PM

It sounds quite intriguing....

Damn it, I promised myself no more guns, but you just can't stop.
  • 0
Nobody online Nerfs in the SE :(

#18 Rip32

Rip32

    Member

  • Members
  • 177 posts

Posted 03 February 2006 - 08:12 PM

I might consider buying it, if you could give me and aproximete range on it.

Edited by Rip32, 03 February 2006 - 08:12 PM.

  • 0
http://www.break.com...iencechild.html
Funniest video ever. This kid needs some serious help

#19 Shwifty

Shwifty

    Member

  • Banned
  • 109 posts

Posted 07 February 2006 - 07:57 PM

I may sound like a broken record but, rangatize me capn'!
*Well isn't that SHWIFTY?*
Am I now concidered infamous?

#20 baghead

baghead

    Cheetos

  • Members
  • 1,366 posts
  • Location:SoCal
  • State:California
  • Country:United States
  • Mad Artisan Labs on Youtube

Posted 09 February 2006 - 12:36 AM

I Will Have Ranges Soon, But Class just kicked back in for my College and I'm not sure if I'll be free to work on nerf stuff again untill the weekend at the soonest.

-bags
  • 0

Don't call it a comeback, I never left.


#21 Metal Nerf Solid

Metal Nerf Solid

    Member

  • Members
  • 9 posts

Posted 09 February 2006 - 11:09 AM

I hate to make this my first post, but please do give a range on your Sawtooth. On a related note, I still have my old Sawtooth, but I lost the clips for it; would you have any additional clips or know anyone who has extra clips?

Edited by Metal Nerf Solid, 10 February 2006 - 03:51 PM.

  • 0

#22 baghead

baghead

    Cheetos

  • Members
  • 1,366 posts
  • Location:SoCal
  • State:California
  • Country:United States
  • Mad Artisan Labs on Youtube

Posted 09 February 2006 - 12:47 PM

I Will Have Ranges Soon, But Class just kicked back in for my College and I'm not sure if I'll be free to work on nerf stuff again untill the weekend at the soonest.

-bags

Dude, read what I JUST POSTED!
  • 0

Don't call it a comeback, I never left.


#23 baghead

baghead

    Cheetos

  • Members
  • 1,366 posts
  • Location:SoCal
  • State:California
  • Country:United States
  • Mad Artisan Labs on Youtube

Posted 09 February 2006 - 08:07 PM

Sorry For the Double Post but this is important!

Ranges for the BC sawtooth:

Stock TAgger Darts:

Flat average 45-55 feet

angled average 60-70 feet

Micro stefans:

Flat Average: 40-50 feet

Angled average: 55-65 feet

I know it's strange that the stefans produced less range, but i think that is due to the fact that my stefans are a little small for crayola barrels.

And I've got it up on a the e-bay:

http://cgi.ebay.com/...item=6035735825

-bags

Edited by baghead, 09 February 2006 - 08:49 PM.

  • 0

Don't call it a comeback, I never left.



0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users