The Crossfire out of the box surprised me. This gun was pretty powerful for such a small gun. Some might say it would be compared to the scout, but I must disagree. I must say I've only shot a Scout once or twice when NerfMonkey still had one, the Crossfire still seems more powerful.
Materials for this mod.
At least; 4in. Of CPVC
1 ½'' CPVC coupler
Screwdriver
Hot Glue/Sticks
Hacksaw
Step #1. Open up your gun.
Step 2. Cut your (stock) barrel near the tip of the barrel. Please note: I cut too far away from the tip of the barrel. If you do this mod cut closer to the tip.
![Posted Image](http://i5.photobucket.com/albums/y161/sqiggs89/000_0451.jpg)
Step 3a. Use a dremel to dremel out your retrictor. I used a hammer and I got a big hole in my plunger tube.
Step 3b. Glue your coupler on whats left of the stock barrel. Do not push the coupler all the way down.
![Posted Image](http://i5.photobucket.com/albums/y161/sqiggs89/000_0452.jpg)
Step 4. Shave the case near the top so the coupler could fit in there.
Step 5. Screw the gun back together.
![Posted Image](http://i5.photobucket.com/albums/y161/sqiggs89/000_0453.jpg)
Step 6. Glue your coupler to the sides of the case. I'm not sure but I think this is the only way to make this coupler activity work.
![Posted Image](http://i5.photobucket.com/albums/y161/sqiggs89/000_0455.jpg)
Ranges and accuracy:
This is a fairly simple mod and the fact that I have a hole in my plunger so I can't give exact ranges.
But I tested and got around 55' flat almost consecutively . I'm sure this mod will get better ranges if you don't have a hole in your plunger.
The accuracy on this gun is pretty nice.
Questions/comments?
Edited by Sqiggs89, 31 January 2006 - 05:51 PM.