Jump to content


Photo

Rf20 Cpvc Mod


21 replies to this topic

#1 NerfMonkey

NerfMonkey

    Member

  • Members
  • 1,821 posts

Posted 24 January 2006 - 10:26 PM

I've read posts about people wanting to do barrel mods on their RF20s, but never seen a writeup or even any results of these mods. I've been wondering whether or not to do this mod for a while, but since I have thinner FBR than most people, I figured why not? It was worth it.

Materials

RF20
40" of 1/2" CPVC
PVC cutters/hacksaw/pipe cutters
Hot glue
Phillipshead screwdriver

Procedure

First, open up your RF20 enough to get to the turret and get it out of the gun. This mod doesn't involve any internal mods so you don't have to worry about opening the whole thing.

Posted Image

Next, unscrew your turret so you have two halves. This is simple and you shouldn't need a picture.

Now the good part (with pictures). Cut your 40" of CPVC in to approximately 2" sections, these will be the barrels. Be sure to cut them as straight as possible so they go on the turret straight. They should look something like this:

Posted Image

Now, once you've got all these cut (I *highly* recommend PVC cutters, they make it so much easier), start to glue them on to ONLY the bottom half of your turret, not the actual barrel part.

Posted Image

Make SURE you do the inner row first, it will make it much, much easier later on.

Posted Image

Posted Image

Once you've finished the inner row, do the outer one. Here's the finished turret.

Posted Image

The videos will show how the gun looks when finished, it's just an RF20 with whitish barrels.

Firing 1
Firing 2

The first video shows my point of view and where most of the darts landed. The second is to show that the darts really do get these ranges, as if you look closely you should be able to see them falling in front of the camera on the ground.

RANGES: Done with 20 approx. 1.5" Stefan micros weighted with a 1/4" slingshot ball each. I measured these and put them in order from shortest to longest. The average is listed below. I don't know why the gun is so inconsistent, but I'm happy with it.

1. 35' 1"
2. 37' 8.5"
3. 41' 8"
4. 43' 11"
5. 45' 2"
6. 45' 5"
7. 47' 1"
8. 47' 6"
9. 48' 1"
10. 48' 1"
11. 48' 2"
12. 48' 5"
13. 51' 8.5"
14. 52' 0"
15. 53' 4"
16. 53' 9"
17. 56' 11"
18. 57' 3.5"
19. 60' 8.5"
20. 62' 10.5"

Average: 49.24375' ~ 49' 2" FLAT

Of course there was a bit of dart skip, probably under 5' though.

Edited by NerfMonkey, 25 January 2006 - 09:30 PM.

  • 0
SexD Warves

#2 3nerfiteers

3nerfiteers

    Member

  • Members
  • 128 posts

Posted 24 January 2006 - 10:33 PM

:D
Wow.... 62 feet speaks for itself. Do i have to say more? Well done!
  • 0
Quilted northerns, home of the "Crazy Arrow"

#3 Forsaken angel24

Forsaken angel24

    Member

  • Contributors
  • 2,472 posts

Posted 24 January 2006 - 11:30 PM

I am digging the mod. The ranges are pretty messed up but hey its a full auto.
The barrels on the outside dont look straight. How is the accuracy? Lastly I would like to say Kudos because making 20 barrels can be really time consuming and you risked a RF Turret to make it. I am assuming this mod is reversible because you only used hot glue and you can just add the second half of the turret back on at any time. If you were unhappy with the mod.

I think it would be a great idea if someone took the barrel half of their rapid fire turret and cut the barrels down to 1/2" then sand out the middle and ram 9/16" brass in there. The red rings would act as a stabilizer and help accuracy like in Cxwq's AT3k mod. I might try this. Thanks for helping this idea bloom.
  • 0
I don't get my kicks out of you,
I don't feel the way I used to do.
I know its bad,
After what we had,
But I’m just not the angel you knew.

#4 Black Wrath

Black Wrath

    Member

  • Members
  • 1,071 posts

Posted 25 January 2006 - 07:41 AM

You're my new favourite member, NerfMonkey!

Video evidence of range? Come on, you can't be that. Great job on your mod! I really like how instead of saying you got 62' ranges, you took a camera, and showed us the dart flying 62'.

I hope people follow by example.
  • 0
Xx_Black-Wrath_xX of The Canadian Foam Militia

Not in the game anymore, but it was great while it lasted. Thanks for the great years of fun, NH!
--
Resident "Spawn of Talio"

#5 NerfMonkey

NerfMonkey

    Member

  • Members
  • 1,821 posts

Posted 25 January 2006 - 04:04 PM

:)
Wow.... 62 feet speaks for itself. Do i have to say more? Well done!


You're my new favourite member, NerfMonkey!


Why thank you.

I am digging the mod. The ranges are pretty messed up but hey its a full auto.


I'm not sure why it's so inconsistent either. It's a lot wider of a range than before from shortest to longest, maybe it has something to do with the seal, like it's better on the inner ring than the outer?

The barrels on the outside dont look straight. How is the accuracy?


Yes, the outer row is very crooked but it doesn't kill the accuracy too much. The main side effect of this mod I noticed was a bit of a slowdown in how fast the gun fires, but from 2.5 to 3.5 seconds isn't that big of a difference. The accuracy on this gun wasn't superb in the first place and with 15-20' more range I don't really mind a bit of a loss in that department anyway.
  • 0
SexD Warves

#6 Sqiggs89

Sqiggs89

    Member

  • Members
  • 208 posts

Posted 25 January 2006 - 04:54 PM

I had an idea like this one a long time ago when I got my RF20, but never had enough CPVC to try it, and now it works! Yay! Good job!
  • 0
Been a while.
#bro

#7 Shivon

Shivon

    Member

  • Members
  • 53 posts

Posted 25 January 2006 - 08:59 PM

The ranges are probably the way they are because with a full auto when it shoots a person tends to kick the wrist back a little, which gives it a tilt, and thus longer ranges depending on what order they were fired in. Thats why the numbers get higher by only like 3 feet per round. Its all in the math boyo's.

-Shiv
  • 0
Insanity is only one persons perception of another persons reality

#8 NerfMonkey

NerfMonkey

    Member

  • Members
  • 1,821 posts

Posted 25 January 2006 - 09:03 PM

I couldn't visibly see my hand moving and I steadied the gun to prevent that very thing. I don't think my hand was jerking. When the 4" of snow outside melt off I'll retest and steady the gun against my shoulder to prevent any jumping of my hands.
  • 0
SexD Warves

#9 dpstohl

dpstohl

    Member

  • Members
  • 12 posts

Posted 08 November 2007 - 06:22 PM

I don't know if anyone else has had this problem but i can't seem to get the black part off at the top of the gun to get the shell off. Please HELP!!!
  • 0

#10 Ubermensch

Ubermensch

    Member

  • Members
  • 1,056 posts

Posted 09 November 2007 - 06:38 AM

This topic is more than a year and a half old.
  • 0
"In order to make an apple pie from scratch, you must first create the universe."-Carl Sagan
Nerf Rocket Air Launcher

#11 Prometheus

Prometheus

    Member

  • Members
  • 780 posts

Posted 09 November 2007 - 07:49 AM

This topic is more than a year and a half old.


Shut the hell up. He had a legit question, and it's better that he revive it than make a new topic. At least we know he has a specifice type of mod in mind, so now the previous people who posted here with anything relevant can be of more assistance.

Edited by Prometheus, 09 November 2007 - 07:50 AM.

  • 0
QUOTE(VACC @ Jan 24 2008, 06:12 AM) View Post
I am NEVER going to sleep naked in the bed of a former child star ever again....seriously

#12 Forsaken angel24

Forsaken angel24

    Member

  • Contributors
  • 2,472 posts

Posted 09 November 2007 - 12:33 PM

I don't know if anyone else has had this problem but i can't seem to get the black part off at the top of the gun to get the shell off. Please HELP!!!


I have also had this problem. To take care of it, lightly pour some lighter fluid around the parts that its glued.
This will eat away at the glue and eventually make the part easier to come off. If you pry too hard you will break the grey part of the shell.
  • 0
I don't get my kicks out of you,
I don't feel the way I used to do.
I know its bad,
After what we had,
But I’m just not the angel you knew.

#13 Ubermensch

Ubermensch

    Member

  • Members
  • 1,056 posts

Posted 11 November 2007 - 05:22 PM

This topic is more than a year and a half old.


Shut the hell up. He had a legit question, and it's better that he revive it than make a new topic. At least we know he has a specifice type of mod in mind, so now the previous people who posted here with anything relevant can be of more assistance.


He necroed three topics to ask one question. You'd think he could just start his own friggin' topic. Pardon my sounding like an asshole.
  • 0
"In order to make an apple pie from scratch, you must first create the universe."-Carl Sagan
Nerf Rocket Air Launcher

#14 dpstohl

dpstohl

    Member

  • Members
  • 12 posts

Posted 14 November 2007 - 05:42 PM

I got the damn thing off but now I have trouble with the range. I removed the restrictors but now my gun doesnt get any range at all. Do I have a bad seal? I checked the forums and can't find any information so i apoligize if this has been answered already.
  • 0

#15 Lynx

Lynx

    Member

  • Members
  • 983 posts

Posted 14 November 2007 - 07:18 PM

This topic is more than a year and a half old.


Shut the hell up. He had a legit question, and it's better that he revive it than make a new topic. At least we know he has a specifice type of mod in mind, so now the previous people who posted here with anything relevant can be of more assistance.


He necroed three topics to ask one question. You'd think he could just start his own friggin' topic. Pardon my sounding like an asshole.


Necroer no Necroing
Necroer no Necroing
Necroer no Necroing

-Dora the Explorer:
You idiot.
  • 0
Columbus' original crazy asshole now comes with:

AWESOME NITEFINDER

#16 dpstohl

dpstohl

    Member

  • Members
  • 12 posts

Posted 15 November 2007 - 06:08 PM

For all those who call me a "necroer" i apologize. I just didn't see why it would be so bad to ask a question in 3 topics to get the answer quicker. Again I apologize...
  • 0

#17 ultra920

ultra920

    Member

  • Members
  • 272 posts

Posted 16 November 2007 - 05:21 PM

This topic is more than a year and a half old.


Shut the hell up. He had a legit question, and it's better that he revive it than make a new topic. At least we know he has a specifice type of mod in mind, so now the previous people who posted here with anything relevant can be of more assistance.


He necroed three topics to ask one question. You'd think he could just start his own friggin' topic. Pardon my sounding like an asshole.


Necroer no Necroing
Necroer no Necroing
Necroer no Necroing

-Dora the Explorer:
You idiot.

C'mon, you don't need to be a bitch about it. You arent a mod, or badger.Take it easy on him, were human, we make mistackes. Take a chill pill, but only 1 or else you OD.

Edited by ultra920, 16 November 2007 - 05:21 PM.

  • 0
There is no Ultra, only a 920.

PSN: ultra920 MGO:ultra920 shoot me an MGO invite if you play

#18 Guest_Dave_*

Guest_Dave_*
  • Guests

Posted 26 December 2007 - 03:50 PM

Great job, nerfmonkey! My modded Rf20 shoots really well now, but the kind of Cpvc i used was a little thick, so I have trouble loading stefans (and not to mention stock darts) in. Is there a way to shrink the stefans to fit the barrells? I thought maybe I could heat them up and then stretch them out, but I haven't gotten around to doing that yet.
  • 0

#19 Guest_Dave_*

Guest_Dave_*
  • Guests

Posted 26 December 2007 - 03:51 PM

Great job, nerfmonkey! My modded Rf20 shoots really well now, but the kind of Cpvc i used was a little thick, so I have trouble loading stefans (and not to mention stock darts) in. Is there a way to shrink the stefans to fit the barrells? I thought maybe I could heat them up and then stretch them out, but I haven't gotten around to doing that yet.
  • 0

#20 Prometheus

Prometheus

    Member

  • Members
  • 780 posts

Posted 26 December 2007 - 11:58 PM

I was wondering why I saw such and old topic again. Here is something to check out Dave.
  • 0
QUOTE(VACC @ Jan 24 2008, 06:12 AM) View Post
I am NEVER going to sleep naked in the bed of a former child star ever again....seriously

#21 Tigg

Tigg

    Member

  • Members
  • 6 posts

Posted 29 December 2010 - 03:54 AM

About the inconsistency of range:
While I am uncertain of the full cause of it, I believe it has to do with the tightness of the CPVC barrels. I used the dremel (spelled right I hope) tool to sand away a little of the inside of the barrels. It helped. The range became more consistent in the 60 foot range. :) I need to sand away more... I shall post results when I have completed sanding and testing.
  • 0
TIGG

#22 DeathDart2k

DeathDart2k

    Member

  • Members
  • 26 posts

Posted 06 January 2011 - 08:40 PM

tigg its been 3 years since the last person was active.... please dont post on this after a 3 year break.......
Noobs..
  • 0
My story? My story...Hmmmm Im a no-name noob, who cant angel breach a longshot.....Trying to have fun and meet good people...Too bad theri isnt a MOD TIME if you will before a war...


1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users