14 replies to this topic

[homerpalooza101]

hey guys. This is my first post and I need some help. I just got into nerfing. I had one when I was little, but just to mess around with. I am looking for a good long range gun that shoots micro darts. I only have a Mav and all of my friends hav Mavs or other guns that shoot micros, and I dont wanna have to bother with tryin to find the right size darts in the middle of a war. Please help me.

[Paloose]

The Blast Bazooka is pretty good with a pvc barrel mod.

http://nerfhaven.com...l=blast bazooka

[nerfer34]

A nitefinder is good long range pistol when modded.
Expand a blast modded to shoot micros( kind of tough to get)
Ya the Lanard Blast Bazooka
max shot(modded)
check out www.nerfcenter.com for ranges and ratings.

Edited by nerfer34, 19 January 2006 - 03:05 PM.

[homerpalooza101]

I heard a lock n' load is good, too. Any comments?

[Rip32]

First of all, are you planning on modding your guns or not.
- If you don't want to mod, then yea a nf is good for you.
- If you are gonna mod your blasters to shoot micros, I would not suggest the nf, because the new editions suck, when modded with pvc. PETG works better.
- The LBB is a good primary, aswell as the maxshot, and also a BBB, which can be modded with pvc, to shoot micros. You can probably pick up a BBB or LBB at your local toyrus.
- As for the lnl, when stock it shoots megas, so you could buy it and mod it with pvc or something. It will cost you about $20, if your lucky, but usualy more.

I think your best bet would be a BBB, and NF if you do plan on modding, and an at2k or 3k and NF if you don't plan on modding.

[homerpalooza101]

I don't plan on modding it right away, I just need something that will shoot accurately for like 25-30 feet, so I'm prob just gonna buy a NF and put some rubber bands on it and maybe a flashlight mod when I get the time. Any thoughts?

[nerfnikkogunner]

I don't plan on modding it right away, I just need something that will shoot accurately for like 25-30 feet, so I'm prob just gonna buy a NF and put some rubber bands on it and maybe a flashlight mod when I get the time. Any thoughts?

Yeah.
put a heck of alot of rubber bands!So much until its too hard to cock.Its hard to pull, but its worth the range.using your left middle finger when pulling is the easiest method.

[SharpShot2]

I don't plan on modding it right away, I just need something that will shoot accurately for like 25-30 feet, so I'm prob just gonna buy a NF and put some rubber bands on it and maybe a flashlight mod when I get the time.  Any thoughts?

Yeah.
put a heck of alot of rubber bands!So much until its too hard to cock.Its hard to pull, but its worth the range.using your left middle finger when pulling is the easiest method.

It's not worth the 10-15 ft. range when the cocking arm snaps in half.

[LastManAlive]

Face it man, you need to mod right away. Get the NF and slap a CPVC barrel on it. Look at the mods directory here. When you are done with that , add a couple of bands.

[DTReaper]

I find if you add a cpvc coupler to the end of the cpvc it works rather well in a nitefinder if your using stock darts.

-DTR

Edited by DTReaper, 20 January 2006 - 07:38 PM.

[Paloose]

Don't tell him a certain barrel type to use because it may not work for him. I personally use a crayola barrel on my NF because I found that cpvc was to tight on my micros.

Edited by Paloose, 20 January 2006 - 09:21 PM.

[homerpalooza101]

I'll probably get my NF at the end of the week, but I need a mod. I've been looking through the posts, but I don't know which barrel mod would be the best. Also, if it doesn't say in the post, what size barrel will I need (I'm shootin with stock micros)? Plus, for paint, do you just tape stuff off and spraypaint it or paint it by hand?

[Paloose]

For a nite finder use PETG if you can find it, 9/16 brass, or even a crayola barrel.

[homerpalooza101]

I have one last question, what would be a better barrel for losing, PETG, brass, or crayola? Also, where can I get PETG <(does it come in diff sizes?)?

[The Infinite Shindig]

Check out The cxwq Guide to Darts and Barrels.