Jump to content


Photo

I Had An Idea...


3 replies to this topic

#1 phoenix

phoenix

    Member

  • Members
  • 18 posts

Posted 08 January 2006 - 10:34 PM

OK..well, i had an idea sitting at my moms....i had some chunks of pipe foam laying there in the floor, so i cut those up into smaller chunks and then i saw a pringles can and a empty paper towel tube over on the counter and thought.." Hmm...you could put the chunks into one of these...somehow hook up an air tank and hook up some other device like a booby-trap and when someone stepped on a trigger they would get sprayed with little chunks of foam"

I'm open to suggestions.... so whad'a ya guys think? :unsure: :w00t:
  • 0

#2 The Infinite Shindig

The Infinite Shindig

    Arma-what-now?

  • Contributors
  • 1,383 posts

Posted 08 January 2006 - 10:37 PM

1. Read our Code of Conduct and start following it.
2. Here we look to see people post finished projects, not speculations of ideas. I would suggest you try doing that.
3. If you are talking about using a pringles can or paper towel roll for anything that involves pressure, you are crazy.
  • 0
Shindig of the Lawn Chair Mafia

<a href="http://www.albinobla.../flash/posting" target="_blank">Posting and You</a>

#3 Forsaken angel24

Forsaken angel24

    Member

  • Contributors
  • 2,472 posts

Posted 08 January 2006 - 10:59 PM

It just gave an idea on how to make a trap though. Write up coming in the next few weeks. Like a party popper but alot bigger in diameter, spring and strength. Just a spring and catch mechanism. the catch is released due to a trip wire which when agitated will fire the small foam like peices or stefans. The same thing could be done to any springer.

Edit: Now that is an idea!

I concur with shinny.

Edited by Forsaken_angel24, 08 January 2006 - 11:02 PM.

  • 0
I don't get my kicks out of you,
I don't feel the way I used to do.
I know its bad,
After what we had,
But I’m just not the angel you knew.

#4 phoenix

phoenix

    Member

  • Members
  • 18 posts

Posted 09 January 2006 - 11:25 PM

oops... i'll take care next time
  • 0


2 user(s) are reading this topic

0 members, 2 guests, 0 anonymous users