After reading the barrel modification for the BBB (BBB MOD)
I was wondering how I could get the BBB to shoot both micro darts and the original arrows
Thx
Bbb Help
Started by Anubis, Dec 17 2005 10:26 PM
5 replies to this topic
#1
Posted 17 December 2005 - 10:26 PM
#2
Posted 17 December 2005 - 10:40 PM
You could use a 9/16 brass barrel or a cpvc barrel, then wrap some electrical tape around the barrel a few times until it is able to hold a arrow snugly. Don't go by that mod's barrel length though. An eight or nine inch barrel is all you really need, I just like the look of a longer barrel.
#3
Posted 17 December 2005 - 11:34 PM
Also, if you're using stock micros or don't mind a super short barrel, I found that after dremeling out the restrictor a crayola fit snugly inside of the existing barrel. Now it fires stock micros or arrows.
#4
Posted 19 December 2005 - 10:07 PM
Also, brass fits well too; just make sure you jam it in there tight, or glue it in there, because flying brass =/= fun. Unless... No, just no.
~ompa
~ompa
#5
Posted 19 December 2005 - 11:04 PM
i dont like the bbb at all it looks horrible
#6
Posted 26 December 2005 - 03:59 PM
Must...resist...urge...to...FLAME.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users