
Tools needed:
6in. of ½ inch cpvc
Phillips screwdriver
Hot glue gun
Hammer
Something to pry/smash the orange caps off
1. Surprisingly, the hardest step. Do what ever you can to get the orange caps off (dremel, file, smash, pry, melt, just whatever you can). Then remove all the screws.

2. Take the pump out, and plug it with your hot glue gun. It should look like this (sorry the pic is low quality):

3. Cut the your cpvc with a hack saw, then file the ends.

4. Take the cpvc and pound it down in the valve, and place a ring of hot glue around the cpvc, and it should look something like this:

5. Place all the internals back in the case.

6. Screw the case back together. Now you have a foamy weapon of doom!
