5 replies to this topic
#1
nerd with a cause
-
- Members
- 13 posts
Member
Posted 26 November 2005 - 12:01 PM
yah i a noob to moding and i don't get how to take the mavricks turrent (yellow thing) apart. please someone help!!
#2
DX-Robert
-
- Members
- 683 posts
formerly DX
Posted 26 November 2005 - 12:19 PM
It's really not that hard: There are screws at both ends of the yellow rotating barrel. Take the screws out of the rest of the gun and then you'll be able to reach them. Or you can reach them first if you have a small enough screwdriver.
And read the COC again, especially this clause: "Use capitalization and punctuation correctly."
And read the COC again, especially this clause: "Use capitalization and punctuation correctly."
United Nerf Ops - The premier northeast US nerf club serving the tristate area (NY, NJ, CT)
NYC Nerf Ops - Nerf in New York City itself
NJ Nerf Ops - Nerf in New Jersey
CT Nerf Ops - Nerf in Connecticut
LI Nerf Ops - Nerf on Long Island
UNO also has a Discord server:
Join UNO Discord Here
-----------------------------------------------
My other groups:
Nerf Thrifters - A group for posting thrifts and other second-hand finds
#3
Forsaken angel24
-
- Contributors
- 2,472 posts
Member
Posted 26 November 2005 - 12:31 PM
Also, when the screws are out just pull the two peices apart. Make sure all the screws are out or they wont come apart. I had to put a little bit of muscle into getting mine apart for some reason. Even though all the screw were out and everything.
I don't get my kicks out of you,
I don't feel the way I used to do.
I know its bad,
After what we had,
But I’m just not the angel you knew.
I don't feel the way I used to do.
I know its bad,
After what we had,
But I’m just not the angel you knew.
#4
euphemism
-
- Members
- 262 posts
Member
Posted 26 November 2005 - 01:24 PM
Also, getting the metal pole out can be a bitch (probably what gave you resistance, angel) you can push it out with a VERY small screwdriver (the smallest in a set of percision ones usually) and a hammer or do what angel did and just pull very hard.
#5
Forsaken angel24
-
- Contributors
- 2,472 posts
Member
Posted 26 November 2005 - 03:44 PM
Sorry, my post was a little misleading. I meant it was hard for me to pull apart the two yellow peices of the turret. The pole and grey peices system was already taken out.
I don't get my kicks out of you,
I don't feel the way I used to do.
I know its bad,
After what we had,
But I’m just not the angel you knew.
I don't feel the way I used to do.
I know its bad,
After what we had,
But I’m just not the angel you knew.
#6
nerd with a cause
-
- Members
- 13 posts
Member
Posted 27 November 2005 - 10:50 PM
Thanks! I got it apart and I am starting to work on it.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
