Posted 19 November 2005 - 11:04 AM
It's obvious that I can't use hot glue, epoxy etc. because it's a moving part. Any feedback would be appreciated. I really don't want to have to put it to rest.
Posted 19 November 2005 - 01:30 PM
|Catagory 5 hurricanes are the mighty dick of God. You don't mess with that! You don't mess with Gods dick!|
Posted 19 November 2005 - 01:46 PM
Yes, that is the firing pin. So I guess the only way to fix that problem is to replace it, right? I do have another SM1500 air tank but it has a huge crack in it, so my only option that I can see is to take this tank apart and replace the pin, then epoxy the two halves of the air tank back together.
Is that the firing pin? If it is then it must be so worn that it doesn't make a good seal like it suppose to.
Posted 19 November 2005 - 03:11 PM
Posted 19 November 2005 - 03:15 PM
Edited by Lukeinator, 19 November 2005 - 03:15 PM.
Posted 19 November 2005 - 03:58 PM
Posted 21 November 2005 - 01:38 AM
By fluke, I stumbled upon two AT2Ks at Wal Mart in Toronto (in a clearance aisle - returns?)- sorry, both tanks are integrated into active guns. But if I recall correctly, the airtank in the BLUE SM3k is the same/similar as my AT2Ks. Again, I'm not sure whether you already have/can find an SM3k (I got mine at a thrift shop). Or even if you'd be willing to sacrifice a 3k.
Problem being I live in Canada. No AT2K's here.
Posted 21 November 2005 - 09:38 PM
Posted 26 November 2005 - 06:11 PM
Posted 26 November 2005 - 08:23 PM
Edited by SupG, 26 November 2005 - 08:26 PM.
Posted 27 November 2005 - 07:48 AM
I hope that helped.
Posted 27 November 2005 - 10:28 AM
Posted 28 November 2005 - 06:41 PM
Leave the trigger alone, so that if the gun was pumped, the air would be pressurized.
Spray the WD40 on the valve pin. Allow to dry. If the leak persists, spray again.
Allow it to dry. That's the only thing I can stress.
I hope it helps,
Posted 28 November 2005 - 11:34 PM
I don't feel the way I used to do.
I know its bad,
After what we had,
But Iím just not the angel you knew.
Posted 29 November 2005 - 09:01 PM
Posted 30 November 2005 - 07:05 AM
The same goes with vaseline; it eats away at rubber. Just a forewarning to those who use it as lube.
Sorry for not pointing that out Lukeinator.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users