Jump to content


Photo

First Mod Pvc Mod

Better than brass and Ultimanerf's

No replies to this topic

#1 jamesmiller

jamesmiller

    Member

  • Members
  • 18 posts
  • Location:New Smryna Beach, Florida

Posted 15 November 2005 - 05:58 PM

Well, before we get started, I would like to say a few things. Being 10 years old, I have no camera, therefore no pictures. Also this similar mod was done before, I just modded his mod. http://ultimanerf.tr.../firstshot.html
This has pics, you can use them I guess. Ok here we go-


Step one- Open up your gun, not the lever. Pry off one orange cap to get the screw under that.

Step two- Take out the black and orange piece that cover the spring.

Step three- Saw off the barrel and the orange piece under that has four plastic pieces to the side.

Step four- Cut a 3 3/4" piece of PVC that has 1/2" diameter.

Step five- Drill a hole in the orange plastic piece on the black cover. (Just under 1/2" in diameter)

Step six- Hot glue then goop on the PVC onto the orange piece. Then add electric tape for more support. (Make sure the drilled hole and PVC line up exactly)

Step seven- Put orange front piece on the PVC and put the new barrel and cover in place.

Step eight- Put the gun together and put electric tape on the front for more support.



No need to wait for goop to dry. You can start firing. Here are the ranges.

Flat- Average is 66' Accuracy is great.

Angled- Average is 80' Accuracy is okay


Hope you enjoy your new cheap sidearm!

NOTE: This works on both First Shots

Edited by jamesmiller, 15 November 2005 - 06:00 PM.

  • 0
The one, The only............... 10 YEAR OLD NINJA!!!!


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users