Jump to content


Photo

Sharpshooter Ii Has Stopped Catching

I don't know what went wrong.

2 replies to this topic

#1 Shivon

Shivon

    Member

  • Members
  • 53 posts

Posted 15 November 2005 - 05:11 PM

I originally modded both of the barrels to shoot micros, and was going to mod or a single barrel, but then it stopped cathing when i pulled back the ring. I am not sure what happened but i opened it up and evertyhing was where is should be. So any help would be appreciated. Thanks
  • 0
Insanity is only one persons perception of another persons reality

#2 Team Slaya

Team Slaya

    Member

  • Members
  • 615 posts

Posted 15 November 2005 - 05:37 PM

It shouldn't just stop, unless something drastic happened. If you say that everything was in the right way, it should work. Take out the plunger and make sure the notched edge of the plunger is facing the top of the casing, so that the catch mechanism can catch on it. Check the catch spring, too. Other than that... get a new SSII??

TS
  • 0

#3 Beaver Vortex

Beaver Vortex

    Member

  • Members
  • 95 posts

Posted 15 November 2005 - 09:24 PM

I've had that happen. You know what it means? You probably put it together wrong. I recall taking three or four tries before I got it to work. Later I forgot that I replaced the spring and proceeded to stick some rubber bands on it. It then shot with enough force that something or another jumped out of it's proper place and the exact same thing happend again.
  • 0
I am the Milkman. My milk is delicious.


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users