Will cpvc barrels work in place of petg barrels on the At3k?
Cpvc Barrels
Started by
the56ace
, Nov 03 2005 11:50 AM
3 replies to this topic
#2
Crappy Nerfer
-
- Banned
- 149 posts
Member
- Location:Kissimmee, FL
Posted 03 November 2005 - 12:26 PM
Yes. Use 1/2" CPVC if you want the same or similar performance. Also, 1/2" Foam Backer Rod, Backer Rod or Caulk Saver will usually fit in 1/2" CPVC snuggly/tightly.
Edited by Crappy Nerfer, 03 November 2005 - 12:27 PM.
"If one notices a patch of gangrene in a wound on the back of one's hand, one does not simply hope that it gets better over time.
One cuts that shit off at the wrist and learns to masturbate lefty."
- Death
"By BC do you mean Boston College?"
- nerfer34
One cuts that shit off at the wrist and learns to masturbate lefty."
- Death
"By BC do you mean Boston College?"
- nerfer34
#3
NinjZ
-
- Members
- 1,005 posts
Member
- Location:jersey
Posted 03 November 2005 - 12:36 PM
Dont give him wrong information.
He is partly right, CPVC works with micros. But hes wrong in the fact that it is going to be a direct replacement with the same results as PETG. CPVC is a much much tighter fit than PETG. CPVC works for my and the way I make my darts. PETG is too big and loose for me. What works for one person doesnt work for another. Barrel material, dart fit, and foam sizes are not the same for everyone.
He is partly right, CPVC works with micros. But hes wrong in the fact that it is going to be a direct replacement with the same results as PETG. CPVC is a much much tighter fit than PETG. CPVC works for my and the way I make my darts. PETG is too big and loose for me. What works for one person doesnt work for another. Barrel material, dart fit, and foam sizes are not the same for everyone.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
