42 replies to this topic

[the56ace]

the regulator in a rf20 is a wight button in the end of the rubber tank to prevent it from being pressed you can cut noches in the little plates that are there to depress that butten when the tank gets too larg. you can also cut some of a bike tire tube and put it around the rubber tank to give it evan more power. but after you do the regulator mod do not pump your rf20 too much it will explode i suggest 40 to 45 pumps.
im sorry for my spelling im dislexic add and all that other crap.
i would have posted pics but i dont know how.


if you have any other good ideas plese reply

Edited by the56ace, 01 November 2005 - 11:04 PM.

[chris]

Perhaps you could band the bladder?

Edited by chris, 02 November 2005 - 12:28 AM.

[SG Pilot]

That plug or regulator thing poped out of the rubber tank and I can't get it back in. So I may have to try some of that stuff. Thanks for the idea.

By the way, check your spelling and grammer when you type. It's a rule in the Code of Conduct and it makes life a lot easier to understand you.

[the56ace]

Perhaps you could band the bladder?

thats what the bike tube is for

[NerfMonkey]

I've heard the RF20's tubing will blow if you put too much pressure on it (i.e. inner tube/band it). I'd advise against it.

[the56ace]

thus the 40to 45 pumps only

[NerfMonkey]

Uh, no. Usually people pump RF20s about 20 or 25 times and the tubing still blows. If you continue to pump it with the bladder banded, it's going to happen, especially at 45 pumps.

[the56ace]

well i like to live life on the edge

[nerfisfun]

well i like to live life on the edge

You won't be living long then .
Yeah, have you actually tried it? Even I know that if you manage that, you can say good-bye RF20.

Edited by nerfisfun, 02 November 2005 - 08:58 PM.

[chris]

I'm pretty sure the box says 20 pumps. 45 is a little insane. And for only 20 darts?!

[ompa]

THIRST has blown through I believe 3 RF20's by inntertubing the bladder.

After a certain amount of pumps it won't matter, as the OP valve will kick in as soon as the little black pin hits the wall. At least that is what it's supposed to do...

~ompa

[the56ace]

THIRST has blown through I believe 3 RF20's by inntertubing the bladder.

After a certain amount of pumps it won't matter, as the OP valve will kick in as soon as the little black pin hits the wall. At least that is what it's supposed to do...

~ompa

i cut away some of that wall so the valve would not open

[The Infinite Shindig]

i cut away some of that wall so the valve would not open

Please read and review our Code of Conduct. Thanks.

[SofaKing]

This guy seems to have solved the over-pressure problem, Here's a link to the video.

[the56ace]

This guy seems to have solved the over-pressure problem, Here's a link to the video.

Dude that is my borther for real im thaddeus gerrish and i made that video

Edited by the56ace, 03 November 2005 - 05:26 PM.

[man with many guns]

i cut away some of that wall so the valve would not open

Please read and review our Code of Conduct. Thanks.

He said he was dislexic and add so he can't spell. Thats pretty cool thats your brother.

[SG Pilot]

Is the bladder that white plug that plugs into the red tank with the rubber tuby thing in it? If so, then it poped out of the rubber tubing when I tried something by accident. Would any of this tank modding help at all? I'd really like my RF20 back and running again.

Also, when you say band the bladder, you mean elastic bands right? What do you do? I'm still kind of confused with the bike tubing. Excuse my n00bishness.

Edited by SG Pilot, 03 November 2005 - 06:45 PM.

[man with many guns]

Is the bladder that white plug that plugs into the red tank with the rubber tuby thing in it? If so, then it poped out of the rubber tubing when I tried something by accident. Would any of this tank modding help at all? I'd really like my RF20 back and running again.

Also, when you say band the bladder, you mean elastic bands right? What do you do? I'm still kind of confused with the bike tubing. Excuse my n00bishness.

The blader is the black thing that expands when you pump it.

[SG Pilot]

Well, anyway, how would banding the bladder help? I can't seem to get the stupid white plug back into it cause it keeps popping out after I pump it 15-20 times. What can I do?

[the56ace]

i cut away some of that wall so the valve would not open

Please read and review our Code of Conduct. Thanks.

He said he was dislexic and add so he can't spell. Thats pretty cool thats your brother.

Thank you, and sg pilot you have to take apart that hose clamp put the valve back in and then put the blader back togather

PS. Man_With_Many_Guns the anwser is yes.

Edited by the56ace, 03 November 2005 - 08:20 PM.

[the56ace]

deleted: doubble post

Edited by the56ace, 03 November 2005 - 08:18 PM.

[SG Pilot]

I can't seem to be able to push the valve (you mean the white plug thing right?) into the bladder. Are the hose clamps the clear fexible little tubes that connect to the valve? Again, please excuse my big n00bishness. I'm not very good with the name of these parts.

[the56ace]

I can't seem to be able to push the valve (you mean the white plug thing right?) into the bladder. Are the hose clamps the clear fexible little tubes that connect to the valve? Again, please excuse my big n00bishness. I'm not very good with the name of these parts.

I will pm you.

[SG Pilot]

Okay, so I manage to get the valve all the way into the bladder and I pump the gun and after around 15 pumps, it still pops out. I'm afraid I still need some help with the gun.

[the56ace]

Send me a pic.