Modification and Paintjob Pictures
Posted 31 May 2009 - 11:15 AM
sorry if they are a little blurry.
It works great as a recon foregrip.
Posted 31 May 2009 - 01:20 PM
One night, I had a stock NF, and a recon lying around. In the morning, I found this
NF gets 50s. Recon gets normal sucky recon ranges.
A crutch stock on a SM1500
Edited by Renegademilitia15, 31 May 2009 - 08:12 PM.
FA_24's response to Ice's back pain thread:
I used to have that problem until I got circumcised. 15 pounds later I was able to stand up straight.
Posted 31 May 2009 - 06:04 PM
Nite Finder. Paint needs touched-up.
Posted 31 May 2009 - 08:45 PM
My first paintjob - went with a simple red / white / black theme.
My first Longshot mod, too - removed AR and safeties so it can be uncocked, magazine catch worked with the bolt forward, etc. Integrated the Recon's ladder sight. Removed the cocking handle and moved the cocking mechanism inside the body, cycled by the front gun handle. Writeup here.
Also my second Longshot mod - tried to brass the breech, massive fail.
Range: 0'. Anyone have a spare LS bolt they want to sell? >_<
'Y' clip. I wanted a side-by-side clip; reloading with a down-over-up motion seems faster than down, flip and try-to-jam-the-clip-back-in-with-my-arm-awkwardly-twisted.
Really simple 'mod' really - I was looking for a spacer block that would allow for the magazine well wall thickness for both the Longshot and the Recon. Turns on another clip fits the bill perfectly. After a bit of experimentation, I decided that a 'forward roll' rotation (end-over-end along the Z axis) was better than a 'barrel roll' rotation (around the Y axis), hence 1/3 the darts face backwards.
Edited by taerKitty, 31 May 2009 - 10:42 PM.
Posted 31 May 2009 - 09:09 PM
Thank you to all who have complemented.
Also if there are to many pictures I will take some off.
Posted 01 June 2009 - 09:51 AM
Firefly 2k with Titan pump. A single pump between shots that get 60 to 70 feet.
Edited by jerm78, 20 June 2009 - 11:08 AM.
Posted 03 June 2009 - 04:18 PM
~Captain Jacobi C. Schpack
"You scratch my back, I'll stick a knife in yours."
~ Richard "The Dick" Coughlan 666
Posted 04 June 2009 - 01:54 PM
all fully modded, AR removed, additional spring, notches removed and tactical rail spring inserted between barrel and front barrel mount
mods: AR removed and 12volt battery pack
Edited by pjotrkuh, 04 June 2009 - 02:20 PM.
Posted 04 June 2009 - 10:37 PM
It has a new flat black paintjob now. This was when it was glossy black and i didn't like it.
+O-ring to maximize seal
+Internal Shotgun Mod
+ 9 screw easy open mod
Edited by nerfdynamics, 05 June 2009 - 09:44 AM.
Posted 05 June 2009 - 12:12 AM
Haha, great minds think alike HeracrossKid?
Edited by Keith, 05 June 2009 - 02:13 AM.
Posted 05 June 2009 - 01:15 AM
(Integration picture here)
Tek 10 cocking mech is broken right now.
Edited by HeracrossKid, 05 July 2009 - 09:22 PM.
Posted 05 June 2009 - 12:25 PM
Posted 05 June 2009 - 02:18 PM
Edited by CaptainSlug, 06 June 2009 - 02:42 PM.
Posted 05 June 2009 - 05:32 PM
Edited by nerfer63, 05 June 2009 - 05:32 PM.
Posted 05 June 2009 - 08:30 PM
• Machining plastic in-doors can wreck a whole room
• Painting in 40 degrees makes sweet salt-flat patterns
• Reflective coating is NOT the same as clear coating
• An Ace spring can shatter a barrel assembly if it is not glued right
• A spring addition with no catcher enhancement is a three shot wonder at best
• The wiring on the laser site is the most fragile part of the gun.
• Any mod with a paint job, 15 minutes at a time, is like 30 YEARS!!!
• You can EASILY spend $100 at the hardware store buying specialist tools and parts if you are just getting into the hobby
-Guns shoot bullets that kill people
-Blasters shoot darts that tag people
I do not play with guns.
Posted 05 June 2009 - 11:07 PM
Posted 06 June 2009 - 08:36 PM
HPA powered magstrike.
Posted 06 June 2009 - 08:42 PM
Direct Threat's Longshot(badass)
Merzlin's Re-Creation(Almost as badass)
As you can see, there are various changes. I hope you enjoyed
Posted 07 June 2009 - 12:24 AM
Funny pipe inside of 3/4 inch PVC and couplered. I also added eight dart holders on the side so it's like a shotgun of some sort.
[20:44] Aimless: Does it make you invulnerable?
[20:45] Venom213: nothing can kill me if I have PROTECTION!!!!
[16:39] Hawkshot: Sloppy joes taste awesome.
[16:39] Mr_BadWrench: Whos Joe?
Posted 07 June 2009 - 06:45 AM
It has an Angel Breach with a longer stroke to accommodate stock darts and eliminate the need for a clip mod.
The 19/32" brass runs all the way through the bolt.
The finished product (at least for now).
Edited by Roy, 18 June 2009 - 10:40 PM.
Wanting a realistic nerf gun is like wanting a dildo that looks like a katana.
Posted 07 June 2009 - 01:14 PM
Edited by jerm78, 20 June 2009 - 11:07 AM.
Posted 08 June 2009 - 11:40 AM
Pm me with any questions, don't expect a write-up. I did this without taking any pics on the way, I had no clue it was gonna work until about 20 minutes ago.
IMPORTANT EDIT: DO NOT attempt this modification if you don't have SF internals that look something along the lines of this:
Edited by mystefansdontflystraight, 08 June 2009 - 11:47 AM.
It's just screaming to be rearloading...
I seen a movie about that once.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users