5162 replies to this topic

[bobafan]

I made this tonight in about an hour.
I used PVC, putty epoxy, parts from my old erector set, and one of my minimized couplered NFs.

[bobafan]

My stefans fly quite straight. The bbs are spaced evenly.

Edited by bobafan, 28 December 2007 - 12:58 AM.

[Dayko]

My hot pink minimized NF


Name:

I haven't picked on yet

Ranges:

About 65'

Comments:

I hot glued some Plexyglass on the the front where the hole was.

Edited by Dayko, 30 December 2007 - 03:41 PM.

[sn1per]

How many sticks of that stuff did you use????

[bobafan]

About half of one.

[xNFx 37]

There's my entire arsenal (minus my sm3k, 2K and 2 shitty NF's (my first mods))

All are modded except my LS



Yes those are baloons that I used for bands. Just pick up some of those balloon animal balloons (dollar tree), make chain of two, and put it on your NF!

I used 2. Also the balloons came with a hand pump I could use
for a new pump or something all for 1 dollar

Excuse teh sukc picture

Edited by xNFx 37, 02 January 2008 - 07:53 PM.

[penguin807]

I usually post in here complementing people, and then I show of my crapily painted guns. This time I was just bored, and I wanted to show off my elephant puppet Buzz saw.



For some reason it always seems to weasel it's way into my games of ping pong... I'm going to do some more stuff to it, I'm also trying to find some motors to hook up to the wheel (they have to be good enough to rev it up all the way, but at the same time be a reasonable size). I'll show you guys when it's finished.

Edited by penguin807, 03 January 2008 - 09:30 PM.

[nerfalchemist]

Just bought and finished these two today.

BBB


LBB

[CaptainSlug]

My "New" secondary. A classic Tech Target I bought from Ryan#####. I replaced the barrel with 4 inches of my preferred size of SCH80 pipe which is bolted to the end of the plunger tube. Also widened out the inside a little for the larger diameter barrel to fit snugly so that I didn't have to use any glue. Ranges are around 70 feet.

Edited by CaptainSlug, 05 January 2008 - 12:10 PM.

[Uterly]

Bolted? Please explain

[CaptainSlug]

The end of the plunger tube was snapped off (normal problem for older tech targets) so I bolted the barrel into the end of the plunger tube and sealed with electrical tape.

[joeyaglr444]

Now that looks very secure, Looks like its not going too get out of place anytime soon. I bet its extremely dependable.

[Quilan Fett]

This is my LS 3K integration. The LS has a manual loading breech with 1/2" Brass in PETG. My AT3K was already broken, so I cut the internals down to just the airtank and the turret. The turret works, but it doesn't auto-rotate anymore.

Inside

[Quilan Fett]

Thanks. I still have to attach the barrel to the bolt sled so I can't try it out yet, but I plan to by midweek.

[ejrasmussen]

http://i273.photobuc...n/Picture13.jpg
My tech target
http://i273.photobuc...n/Picture10.jpg
My DTG
http://i273.photobuc...en/Picture9.jpg
My LBB
http://i273.photobuc...en/Picture6.jpg
My BBB
http://i273.photobuc...en/Picture5.jpg
My Double DS
http://i273.photobuc...en/Picture3.jpg
My LS
http://i273.photobuc...en/Picture1.jpg
My NF

Edited by ejrasmussen, 07 January 2008 - 10:02 PM.

[Wisey]

Nope, only one works for me and thats the one that looks like a Carbine LS with an intergrated Mav. If it is that, it looks really cool. Good job. Fix the rest of the images...

[ejrasmussen]

Ok, lemme fix it.

[ejrasmussen]

Nope, only one works for me and thats the one that looks like a Carbine LS with an intergrated Mav. If it is that, it looks really cool. Good job. Fix the rest of the images...

Sorry dude but its only the cocking mech for the ls frontgun...

[ejrasmussen]

Hey, instead of posting links, (which is fairly annoying), try posting the IMG code onto your post to have a picture right on the page. Just a bit of advice.

I did that and it didnt work. It was probably my fault.

[Twitch]

Has Anyone posted pictures of a Recon with a new paint job? No? Alright, I guess I'll see what I can do.

Everyone, This is Jules (Winfield.)





My hand cannon

I'll be painting "Bad Mother F*cker" here. If you've seen Pulp Fiction, then you understand.

That's no trick of the camera flash. Yes, I painted the gun hot pink.

I post these with the warning/suggestion to others though; be very careful when painting your Recon. The tolerances on the various pieces that fit together (the base of the stock that clips to the back of the pistol, and the cocking mechanism especially) are apparently close enough that even a single layer of protective felt can make it difficult to work the moving pieces. I glued thin strips of felt on the inside of the cocking mechanism so it wouldn't scratch the paint on the body of the gun. Even after leaving the screws that hold the cocking mech' a few turns loose, I still couldn't cock the thing. As a result, I had to remove the felt strips.
The paint has had days to dry, but here's the result of the blaster being cocked and fired 3 times.





I'm giving serious consideration to dumping the entire shell in acetone and trying it again with vinyl dye.


P.S. 3 coats of paint, in case someone asks.

Edited by Twitch, 08 January 2008 - 09:26 AM.

[Flaming Hilt]

...
*twitch.*

[elf avec gun]

Don't mind FH, he is just jealous that you beat him to the bubblegum pink color variation.

[keef]

How about you post a picture? About half of your post count is in this thread I bet.

I'm selling this Longshot on Ebay when I'm done with it. Its singled, painted, and has a "silencer" on it. The paint is flat black, silver specks, and a tint of bronze with a double layer of Matte finish. I'm looking for someone to buy it for around 80 hopefully... PM me if wanted.