Edited by dog green 1, 25 June 2014 - 11:11 AM.
Modification and Paintjob Pictures
Posted 25 June 2014 - 11:11 AM
Posted 26 June 2014 - 12:09 PM
Goes well right with the rest of my pistols.
Here is my New 14 Kg Nerf Rebelle "Messenger From Hell" that I worked on yesterday. Full mod details after the 27th since I am new here. Thanks Langley and Darkdragon for pointing me to the right thread.
Edited by Cartaya, 26 June 2014 - 12:22 PM.
....Fear of a Nerf Planet!
Posted 28 June 2014 - 03:13 PM
Edited by Duke Wintermaul, 28 June 2014 - 03:16 PM.
Posted 30 June 2014 - 02:53 PM
Sledgefire with Strongarm and Triad integrations. I call it "The Kraken".
Cherry red and gloss white alien skin paint job. All internal mods to all blasters. Lots of cosmetics.
Here's the link, can't seem to post pictures from this damn thing.
Edited by Trajarian, 30 June 2014 - 02:56 PM.
Posted 03 July 2014 - 03:08 PM
Pump action Longshot with a front gun integration that has an 2K inside it. Has an improved angel breech, magnetized jamdoor, replaced plunger head,etc. Basically everything you can do to a Longshot. 2K has airflow mods done and fires off a key ring.
Video showing all the details and firing
Posted 04 July 2014 - 12:46 PM
Flet on the underside of the Bolt like FA24 used to do
Push button on the side of the Powerbelle
Pittsburgh General Rules of Engagement:
1.) Fuck Running
Posted 04 July 2014 - 07:10 PM
I would much perfer a game that's free of KY. I like it rough. Right, Vacc?
"She went all Ghetto Fab on you."
Posted 10 July 2014 - 02:32 PM
This was my first ever Nerf blaster, my wife bought it for me. Little did she know...
Replaced the spring and the o-ring with Orangemodworks ones.
Removed the outer hull of the barrel, but then the seal would be non-existent because it actually relies on the screws holding everything together. So I thought I was smart by super glueing everything together. Which also glued the air restrictors tight. So I was forced to drill them out.
I'm still thinking of including some blinking LEDs, activated by a micro switch near the trigger.
Posted 13 July 2014 - 04:54 PM
Yeah I'm a girl....get used to it.
Posted 15 July 2014 - 10:51 PM
Rampage has an OMW rampage kit in it. The triad has the vacuum holes drilled in the bottom, and the firefly is for cosmetics(the scope is holding the top of the firefly together).
Posted 21 July 2014 - 04:59 PM
And when you turn off the lights, the glow-in-the-dark paint shines!
Posted 22 July 2014 - 09:35 AM
Here is a blaster I have been working on
Modifications I did so far are:
rear loading holes
rubber band to hold tank center
zip tie to hold turret mechanics in place
reinforcement on the orange side thingies
pump stroke increase
Modifications to be done to it are:
8 inch PETG barrels
3 Barrel Spacers
OPRV spring upgrade
Pump head reinforcement ( this one is because I didn't know the head was solvent welded to the pump shaft... probably going to achieve this by either adding brass to it, or some other material that is high strength and will fit snugly onto the pump shaft that connects the pump head.)
pump shaft reinforcement (will e-putty the space I the shaft's spaces to give more strength.
custom Paintjob will be done to it (by either me, or Drac...)
Note: the rear loading hole was achieved without a rotary tool... just a drill, small drill bit, a razor blade and sandpaper to smooth up the drill holes after I cut out the inside part carefully with a razor blade.
Note: the big bolt I added to the side shell decoration thingies is because I thought they were held in like the tabs on the Nerf Fire Strike (ELITE)... and soon found out they there solvent welded to the shell.
Note To Drac: If you decide to accept this request I sent you via email, The paints I want are gun metal base coat with your "fangar" red paint as a secondary.
And I would like the turret cleaned up a bit before you paint it, because I don't have a rotary tool (dremel) and it was done with a hacksaw to cut off the stock barrels, and the cut is a little uneven, I also made the holes for the rear loading on the turret with a file, and a steady hand
I also have prepped the blaster with some minor things to get ready to paint, all things related to the sticker(removed the sticker, got rid of any residue from the sticker with butter, and removed the butter/residue combination).
I don't have pictures of all the imperfections on hand, just the side decoration thingy, the way I did the rear loading hole, and the blaster itself. you will
Note to anyone on the staffing list: I will remove this and the note to Drac once he sees what I want done and responds to my email.
I know. I was just busting your Muttonchops. It's just what I do.
Posted 23 July 2014 - 06:17 PM
Just started a Hammershot smoothing out the grip , will maybe have a wood effect handle or go for an ivory look not decided yet but still a lot of sanding needed before paint
Thanks for looking
Edited by Nerf fett, 23 July 2014 - 07:06 PM.
Posted 28 July 2014 - 12:07 PM
Posted 01 August 2014 - 03:42 PM
Paint turned out nothing like I wanted, the masking tape didn't stop line smudging so I ended up fading the white and black as best I could. I also discovered I'm pretty useless with a brush and oil paints as I couldn't remove the brush strokes on the scope. Overall I'm OK with it considering I've never really painted anything before - but I sure gained a lot of respect for people who can do this kind of thing well!
Edited by thechase, 01 August 2014 - 03:44 PM.
Posted 07 August 2014 - 12:10 AM
Posted 07 August 2014 - 09:00 PM
Please ignore the messiness of my den/workshop/sex dungeon. Stampede is double-volted with alkaline batteries, and has a slightly shortened BBB spring inside. Trigger is hooked up to one of the brake handles. Sledgefire pistol sits on the other side.
It could look cleaner but that would involve drilling into my fucking bike.
Video up tomorrow.
Edited by Aeromech, 07 August 2014 - 10:46 PM.
This is so ghetto but so awesome.
Posted 10 August 2014 - 09:03 PM
Two 4B Raiders and a singled breached 3k.
Edited by SlightlySane813, 15 August 2014 - 09:16 PM.
2 user(s) are reading this topic
0 members, 2 guests, 0 anonymous users