Edited by Eik, 09 January 2014 - 12:55 AM.
Modification and Paintjob Pictures
Posted 11 April 2012 - 10:21 PM
Like the only time I messed up
No, the paint is not outside of the grooves, its up on the walls of the grooves..
A preview. Please pm me what you think of my work, or post on my profile.
Posted 15 April 2012 - 05:51 PM
Edited by Ice Nine, 15 April 2012 - 05:51 PM.
Unholy Three: DUPLUM SCRTA, DUPLUM PROBLEMA (2009)
Posted 15 April 2012 - 06:41 PM
My hvz weapons.
Check out my youtube channel for great reviews and modifications:
For even more detailed Nerf info, check out my blog
Posted 16 April 2012 - 02:33 PM
Posted 20 April 2012 - 12:58 AM
Pump blew out, so I revived it. New layered bladder with rf20 internals gets at least 60 feet.
If two powerful is a problem then just go with one powerful. I guess this style of hopper will work even beyond three powerful..
15:46 *** Buff is now known as TheGrapist
15:51 TheGrapist I'M GONNA GRAPE YOU"
Posted 20 April 2012 - 07:11 AM
- I kept the auto advancing turret mech.
- Used craft foam on the turret face instead of rubber washers on the tank.
- Added a Magstrike pump handle.
- Replaced the original tubing with 3/8th" tubing.
- replaced the goo gauge with a cheap dollar store LED.
... the flames make it shoot farther,
Edited by makeitgo, 20 April 2012 - 07:14 AM.
Posted 22 April 2012 - 08:07 PM
If anyone out there needs any helps with using the coat hanger for their LSFG integration, I have like, 20 pics of my whole set up if they could be of assistance.
I Put the LSFG barrel into the Recon Barrel, and put some Front gun stuff on the end for cosmetics. Makes it look much more like a snipr/Assault Rifle than it is stock.
Since the Recon's flip up sights suck, I ripped those off and used their tactical rail clips and bases to create a scope (made from binoculars, so it zooms), and I hot glued the bipod to the other. I'll hyperlink them so I don't post too many pictures.
Recon/Front Gun Barrel
It fits together quite well, don't you think?
Ooh, and I turned the Nightfinder's LED into a flashlight. In addition, I added a CPVC barrel and gave the plunger tube a near perfect seal. Shoots about as well as my Longshot does.
I also discovered that the Crossfire can shoot just as well as a modded direct plunger system gun like the Nightfinder if you swap the spring with a Jolt's, and also improve the plunger seal. No pic is necessary as all the modding is inside. Considering spray painting all of them, but I'm not that great at it yet and I don't want to ruin them.
Edited by ShaNayNay, 22 April 2012 - 08:14 PM.
New Jersey is fuckin weird
Posted 24 April 2012 - 04:08 AM
The Big Blast is a standard well-done SVT4B.
Now the interesting part: Super Soaker Arctic Blast, also known as the Iron Man Super Soaker. I've replaced the pump with the amazing Kmart Schwinn pump, and hooked the trigger to the top valve. Everyone else I've seen has destroyed the spring-operated part of the ball valve, which to me is a huge waste. It's still fully functional.
This thing is ridiculously powerful, on par or beyond a titan or jobar. It also is usable at many fewer pumps than either. The bladder plus spring activated ball valve (full 5/8 airflow... dayum) setup is odd though when it comes to barrel setups. I haven't done as much testing as I could, but things are all over the place. It'll shoot a tagger from a 5' barrel through 2 layers of cardboard, then poop out a slug from 16" SCH80. Out of what I've tested medium-length loose-fitting CPVC has worked the best with slugs.
Because so few people have these and the tank is so odd, there is little info on proper dart-barrel fit. It just releases air really weirdly.
Reverse plungers yeeeah!
Recon: Brass barrel, 1st Gen plunger tube with 1/4" polycarbonate solvent welded in for reinforcement, modified seal to not vacuum load, modified dart tooth, and an XPloderZ spring. Yes, a full 9" long spring, pre-compressed to 4.5". Takes forever to put together, but it shoots really far. I'll measure ranges eventually, but i'd guess far past 60'. There are more pictures of the plunger assembly on my photobucket.
Got this from someone dumb who tried to mod it and ended up ripping the shell in half. It's fixed with polycarb and rivets. Everything has broken on this at some point, and much of it is homemade, including the bolt, plunger, spring rest/powerstock, part of the bolt sled, and parts of the shell that were torn up by the previous owner. Again. more pictures on Photobucket.
Edited by BOSS9, 24 April 2012 - 04:18 AM.
Posted 26 April 2012 - 07:00 PM
Close up of the wye joint and 1.5 inch PVC reinforcement. Here you can clearly see the white "push to connect" tube connector that I used here, attached to the blue tubing coming out of the side of the blaster. This allows me to disconnect the on-board pump and connect it to a bigger pump, or an air compressor if I'm feeling adventurous.
Why did I choose 1.5" PVC to reinforce the wye? Because that allows me to very easily attach a 7 shot absolver-type shell in a 1.5" coupler and plug the wye.
Posted 26 April 2012 - 08:12 PM
My OMW Immortal Kit Blaster
planning to add led's before kit is released.
Posted 27 April 2012 - 01:39 PM
Edited by akira_yakuza, 13 July 2012 - 04:48 PM.
Posted 28 April 2012 - 08:37 PM
Girlfriend did most of the detailing.
Posted 28 April 2012 - 08:37 PM
Edited by MattTheSasquatch, 28 April 2012 - 08:38 PM.
Posted 28 April 2012 - 11:57 PM
Edited by Eik, 08 January 2014 - 05:34 PM.
Posted 29 April 2012 - 03:35 AM
Holes will most likely be cut in the bottom things for the trigger and priming
More to come!
USER WAS BANNED FOR THIS POST
Posted 30 April 2012 - 11:34 PM
BAM! And there's even enough room for extra darts!
Blurry pic of trigger (Screw stuck into button/trigger):
If only it weren't upside down... Make sure you sand the outside of the case wherever you make any cuts, sharp metal edges are no fun.
Edited by idleninja, 30 April 2012 - 11:35 PM.
Posted 01 May 2012 - 08:13 AM
Anyway, my Nightfinder and Barricade, Steampunk style...
NF has had it's air-restrictors removed. The NF also has a slightly longer spring.
The Barricade has been modded further: The on/off switch has been moved to under the trigger, so it turns on when you pull the trigger, and it now uses 2 14500's (and a dummy) to power it. I also put a battery-alarm with display in the back, so I can monitor the state of the two batteries (independently and combined, it continuously alternates between #1, #2 and All).
Currently in possession of 2 Mavericks, 2 Jolts, 2 Reflexes, Nitefinder, Barricade, Recon, Stampede
Posted 01 May 2012 - 11:09 AM
Pressure gauge on the side, goes all the way up to 120psi, but i coubt that can be reached.
View of stock OPV nested in rear of pump tube with a 1" coupler over the top for a stock.
Any Blaster mod or homemade that I post I can commission. Send me a PM on NerfHaven or BritNerf or email me by firstname.lastname@example.org
Posted 05 May 2012 - 04:31 PM
Just 2 screws holding a 1/2" PVC endcap on the back of the blaster:
"There is no such thing as over kill! If you can carry it and prime it. You're good to go". -Makeitgo
"Admin Edit: Dumbest Crossbow in existence. Congratulations!" <-- Admin in the Show off your crossbow thread.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users