Modification and Paintjob Pictures
#3301
Posted 07 September 2010 - 07:15 PM
I did post a separate thread for the writeup for this, if you're curious.
#3302
Posted 08 September 2010 - 02:59 PM
Godly paintjob:
I painted it clear. Lulz.
Edited by Lucian, 08 September 2010 - 05:59 PM.
Contact me for design consultation relating to 3D Printing, CNC Machining, and Laser Cutting. I am always happy to collaborate on viable Open Source projects and/or business ventures.
#3303
Posted 08 September 2010 - 05:28 PM
Rear loading cause I can.
Yes that was a propane tank you saw.
The tank runs at 8 PSI, Lasts for ~25 shots. Hits at least 90ft.
That's about it. And thanks Angela who helped me with these pictures.. It looks huge in her hands.
HOLY CRAP!
FU ALL
#3304
Posted 09 September 2010 - 12:02 PM
GUN PORNZ!!!!!!
Not a fan of LS's?----Good.
Rknight-- wow......N9---your dad is in trouble now!
#3305
Posted 10 September 2010 - 01:30 AM
Here's the Longshot from my Railmod a couple years ago. I've had it painted for some time, but just now got around to doing the stock and Frontgun.
A detail shot of the minimized and pushed back stock. That's rubberized undercoating on the back there, needs extra time to dry, but gives it rough and tumble look i think.
Complete with Frontgun attached via the rail system. Still need to adjust that rail guide a bit because it angles the LSFG up slightly the way it sits now.
Here you can see the trigger for the Frontgun, works much better than a keyring or whatever, cleaner too!
More to come! Working on a Raider and a Disk Shot to match. Possibly more in the family late.
#3306
Posted 10 September 2010 - 06:40 PM
Took probably an hours worth of work, didn't use goop, and it's already airtight and ready to blast some people.
Aaaaaaaaaand...the beast:
If you peed your pants, I understand.
Hey...I got a crazy idea: how about you stop all that sigging stuff? It's not even my thread and it annoys me.
#3307
Posted 11 September 2010 - 12:33 AM
A work in progress. size comparison.
#3308
Posted 11 September 2010 - 01:08 PM
I will have the first painted Stampede, whether it kills me or not...
#3309
Posted 11 September 2010 - 03:14 PM
Pistol splat with 2k Turret
Extended draw Nf
Lanard Quad-shot
Nf with SSPB integrated into the handle
Raider Pistol
My PAS with a hopper clip, my favorite of all my primaries.
#3310
Posted 11 September 2010 - 06:16 PM
I call it the LAMB, since it is a meeker version of the LAB.
Writeup... maybe. The actual design is piss easy, but I took a bunch of shortcuts to save on machining (also because I used scrap parts) which might be worth sharing.
Kruger and Dunning (1999)
#3311
Posted 12 September 2010 - 06:45 PM
I can open the shell and switch out the different colors when I get bored with the green/purple combination. It's an easy way to Tron-ify your Nerf blasters.
*edit*
There are no batteries inside the blaster yet, nor are there any UV LEDs; this is not EL wire, it's just fluorescent tubing with a thin metal wire inside to help it hold a shape.
Edited by Twitch, 12 September 2010 - 07:11 PM.
~bpso86
~JediJoe9
#3312
Posted 12 September 2010 - 11:02 PM
Unholy Three: DUPLUM SCRTA, DUPLUM PROBLEMA (2009)
But Zeke guns tend to be like proofs by contradiction
Theoretically solid but actually non-constructive
Rnbw Cln
#3313
Posted 13 September 2010 - 05:25 PM
I call it a maxshot because it's got a replaced plungertube and plunger head.
On a side note my disc sander doesn't do well with pex.
Edit: If you reinforce the shit out of it a bunch of times you can ad a spring if you keep an eye on it.
Edited by princexbuster, 13 September 2010 - 05:27 PM.
#3314
Posted 16 September 2010 - 05:42 AM
And I always said the n-strike rail on the BritBow would be useful...
#3315
Posted 16 September 2010 - 01:56 PM
Regardless, the post contained several picures of this:
This thread, and this site, is dedicated to Nerf Blasters. If you don't have a nerf blaster to show us, don't post in this thread. You'll have to display your halloween costumes elsewhere.
This is law.
#3316
Posted 16 September 2010 - 08:58 PM
In the process of editing a post by Eik my browser refreshed and apparantly I deleted the post. My bad.
Regardless, the post contained several picures of this:
(Not a gun)
This thread, and this site, is dedicated to Nerf Blasters. If you don't have a nerf blaster to show us, don't post in this thread. You'll have to display your halloween costumes elsewhere.
This is law.
Fair 'nuff.
Gooped a bushing onto my EMB, which will be going under some more cosmetic work soon.
Also, I found a foam baseball that fits into this 2" coupler!
Edited by Eik, 25 December 2010 - 10:52 PM.
#3317
Posted 16 September 2010 - 10:03 PM
These are some of my latest modifications and paint jobs! All of these are for sale on eBay, and you can find the links to them in post in the sales thread
Edited by Banshee, 16 September 2010 - 10:05 PM.
#3318
Posted 17 September 2010 - 08:41 PM
~bpso86
~JediJoe9
#3319
Posted 19 September 2010 - 07:37 PM
My Recon. Only mod is an AR removal. It also has a Raider stock, but I don't count that as a mod.
It's painted black and gunmetal, it has also been "distressed" with some metalic paint to simulate wear. Of course the magazine and stock are distressed to match as well. By far my most detailed nerf blaster.
It's also listed in the trade section if anyone is interested.
#3320
Posted 19 September 2010 - 09:50 PM
If I complete this integration expect a high-speed video write up.
Contact me for design consultation relating to 3D Printing, CNC Machining, and Laser Cutting. I am always happy to collaborate on viable Open Source projects and/or business ventures.
#3321
Posted 20 September 2010 - 08:43 PM
Picture is crappy as it is from my cell phone.
#3322
Posted 20 September 2010 - 09:15 PM
Made the 2k barrel hole a tad to large but going well so far.
Contact me for design consultation relating to 3D Printing, CNC Machining, and Laser Cutting. I am always happy to collaborate on viable Open Source projects and/or business ventures.
#3324
Posted 21 September 2010 - 02:02 PM
Mines still better Prince.
Almost there!
Contact me for design consultation relating to 3D Printing, CNC Machining, and Laser Cutting. I am always happy to collaborate on viable Open Source projects and/or business ventures.
#3325
Posted 22 September 2010 - 02:24 PM
AR and Powerstock mod.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users