Jump to content


Photo

Modification and Paintjob Pictures

POST PICTURES ONLY. How hard is that.

5162 replies to this topic

#4951 yokoschoko

yokoschoko

    Member

  • Members
  • 4 posts

Posted 13 February 2016 - 03:53 AM

:)

Attached Thumbnails

  • recon.jpg

  • 0

#4952 Mehku

Mehku

    Member

  • Members
  • 383 posts

Posted 14 February 2016 - 01:51 AM

I'm resurrecting an old war beast that LouieC3 made back in the day. It really needed to be reborn in a modern setup. It's currently packing a cut down [k26] under the hood and it's completely bonkers even with the stock breech during tests.

 

Pump grip and hybrid cpvc and brass breech is still in the works.

 

IMG_4698_zpsddyfy2lq.jpg

 

IMG_4697_zps5vxatstt.jpg


  • 0

#4953 Raiderous

Raiderous

    Member

  • Members
  • 13 posts

Posted 19 February 2016 - 02:38 PM

my favorite paint job (also my current primary)

IMG_5576.JPG

 

updated:i added my signature (currently the zombie arm decal from one of the zombie strike packs and the flames)

IMG_5580.JPG

and my rayven with a raider front grip and a some what good paint job (first attempt at dry brushing and I decided to start stabing it)

IMG_5578.JPG

Attached Thumbnails

  • IMG_5577.JPG

Edited by Raiderous, 20 February 2016 - 01:43 AM.

  • 0

If I Can Mod a Nerf Gun

Anyone Can Mod a Nerf Gun.


#4954 UnscrupulousModefiler

UnscrupulousModefiler

    Member

  • Members
  • 13 posts

Posted 24 February 2016 - 08:54 PM

*
POPULAR

What's on workbench at the moment:

 

_raptorstrike__wip_part_4__triggers_installed__by_nscrupulousmodefiler-d9uwyoe.jpg

"RaptorStrike" (Work In Progress). Ultraminimised Rapidstrike re-shelled in a Tornado Strike body, with integrated Demolisher launcher. Currently running 180's and teeny-tiny 2S lipo in a power-stock until I fit the triggers and sort the wiring properly. Just sorted rev and pusher-motor triggers and switches. Because I inadvertently cut off the supports for the pusher-motor control switch when minimising, I've decided to go with MTB's Rapidstrike wiring-loom. Some shots of the basic internals here.

 

 

 

And some older stuff:

 

"The Postman" - 8.jpg

The "Postman". 'Cause he always rings twice. Hammershot/Messenger masterkey integration. Hammershot trigger sorted to first fire Hammershot (on a hair-trigger), then the Messenger (with a longer pull). Have run Messenger before as a shotgun, but prefering it now in it's usual 1-2-3 firing sequence.

 

Edit: Firing video here.

 

Nerkita - 72.jpg

"Nerkita" Rayven. Hypercats Dewalt coil-nailgun "homage". Makita 9.6v NiCd battery fully integrated to run the Rayven. This one currently running stock motors on improved wiring and switchgear; Mark 2 has 180's, INR-18650's (and an infinitely better paint-job ...eventually).

 

DSC00811.jpg

The "MessStrike". Messenger/Firestrike integration. My take on SBNC Rob's Retaliator-gripped Messenger. Brassed, air-flow tuned and running the legendary Champion BS0939 (3-3/4" x 5/8" x 16G) AU$2.00 spring addition. No chrono so will make no wild claims ... you'll just have to trust that it's pretty decent. Some comparative spring data here though.


Edited by UnscrupulousModefiler, 21 April 2016 - 05:47 AM.

  • 1

"Greetings Nerflings, we come in peace. Shoot to Thrill!


#4955 TactiCreationsCeo

TactiCreationsCeo

    Member

  • Members
  • 6 posts

Posted 04 March 2016 - 04:51 PM

Just made this one, anyone like it? I used a simple Orange Mod Works spring to boost the performance quite a bit. I also sealed the plunger with electrical tape, removed the air restricter, and greased it a little with white lithium grease.image.jpeg image.jpeg
  • 0

#4956 AH64pilot

AH64pilot

    Member

  • FNG1 
  • 1 posts

Posted 04 March 2016 - 04:59 PM

Here is my Nerf Vault Tec R91 Assault Rifle. A stock stryfe with many aesthetic add-ons.I would have just made a realistic G3/CETME rifle but the gun had to be colorful for use in HVZ and other games which limited my options. The only way I could make a colorful gun cool was to make it a fallout R91. 20160304_133942.jpg
20160304_134006.jpg
I have never tried making something like this so a lot of it was by trial and error. The main tools used were a box cutter knife, sand paper and glue. I hand carved the stock, handguard and the rear sight from wood.I also filed down the trigger, rails, digital designs for a realistic look and added a faux bolt assembly that has a spring inside and the bolt can lock back and spring forward just like on a real hk gun. The iron sights also are functional and resemble hk sights.20160304_134038.jpg
20151005_235114.jpg
I think it turned out very well, let me know what you guys think

Attached Thumbnails

  • 20160304_134054.jpg

  • 0

#4957 TactiCreationsCeo

TactiCreationsCeo

    Member

  • Members
  • 6 posts

Posted 09 March 2016 - 05:31 PM

Literally just finished this monster XD. Any feedback is appreciated! It's just a base Stryfe with upgraded flywheels and a sweet sci-fo paintjob.image.jpeg

Attached Thumbnails

  • image.jpeg

  • 0

#4958 BritNerfMogul

BritNerfMogul

    Member

  • Members
  • 560 posts

Posted 10 March 2016 - 09:26 PM

12814161_10153988446382658_1262163643334
12798946_10153990060272658_2137535017739[/img]

  • 0

#4959 Sketch Art Online

Sketch Art Online

    Member

  • Members
  • 25 posts

Posted 11 March 2016 - 05:18 PM

Here's my Modulus with integrated Deploy stock, Retaliator barrel with integrated LSFG sight and barrel, because it gives L33T ranged and uber accuracy, plus the 3s Lipo,  18AWG silicone wiring, high current Microswitch and Xt60 connector helps a touch with that. 

Super happy with how this turned out and glad to finally have had a use for that waist of space Deploy. 

I also relocated the sight rail back a fee inches so it can be used more ergonomically when shouldered with the longer stock. Doing this also opened up the jam door for easier access. 

 

Oh my goodness! I Don't believe I've ever seen a nicer looking blaster on the haven!  I'm wasting one of my posts today just to say how incredible this is!  Amazing work!

 

 

 

Done and Done! Sorry bout that!  need to post pics of these on here anyways.

 

105_0046_zpsgsejbplg.jpg

 

 

(Above)  My unnamed Crayola barrel sidestrike with an *ehhh* paint job.

 

 

105_0049_zpshvgdbqwd.jpg

 

(Above)  The Demolabolololisher,  my premium  Zambie slayin' machine.  If you cant tell, this is a Demolisher with the rocket launcher part cut off and and integrated Abolisher hamp roughcut.

 

 

USER WAS WARNED FOR THIS POST

NO PICTURE, NO POST.


Edited by Sketch Art Online, 12 March 2016 - 08:09 PM.

  • 0

Do not aim at eyes or face


#4960 CaliforniaPants

CaliforniaPants

    Futtbrustrated

  • Moderators
  • 459 posts

Posted 12 March 2016 - 09:20 PM

the first step in making the apollo more war worthy. if you want to try something similar dont try and make the stock attachment point yourself, just cut the back off a recon or other trash blaster that accepts stocks.
 
20160312_175225_zpsuiowysf3.jpg
20160312_175202-2_zpskagqhfli.jpg
20160312_175144_zps3ei2xsyk.jpg

  • 0

trans as shit because fuck you


#4961 Aldegar

Aldegar

    Member

  • Members
  • 25 posts

Posted 13 March 2016 - 08:10 AM

IMG_2052_zpsz4qduhjm.jpg

 

Pump action retaliator


Edited by Aldegar, 13 March 2016 - 08:12 AM.

  • 0

www.tacticoolfoam.com

Custom nerf guns and nerf modification kits

 


#4962 Aldegar

Aldegar

    Member

  • Members
  • 25 posts

Posted 13 March 2016 - 08:15 AM

IMG_1854_zpslmx8utbi.jpg

 

AK74su stryfe running on 3 imrs


IMG_1845_zpshutz5etv.jpg

 

Stryfe vector, m4 stock, 3s, falcons


Edited by Aldegar, 13 March 2016 - 08:14 AM.

  • 0

www.tacticoolfoam.com

Custom nerf guns and nerf modification kits

 


#4963 Mehku

Mehku

    Member

  • Members
  • 383 posts

Posted 18 March 2016 - 05:28 PM

Fresh off the workbench. Her name's Kaasi.

 

IMG_4914_zpssdljaptp.jpg

 

IMG_4912_zps631nbkoe.jpg

 

Some may argue that it's a waste if you don't replace the plunger tube, but I disagree. I think it takes away from the character of the blaster, and I already have a plusbow. This punches 125 fps with stefans, so I'm happy. I just have a few more minor reinforcements to make and it's done.


Edited by Mehku, 18 March 2016 - 05:40 PM.

  • 0

#4964 yokoschoko

yokoschoko

    Member

  • Members
  • 4 posts

Posted 19 March 2016 - 02:05 AM

Nerf Stryfe G36 mod.

 

See more: here!

 

Attached Thumbnails

  • g36.jpg

  • 0

#4965 Vim Fuego

Vim Fuego

    Member

  • Members
  • 64 posts

Posted 21 March 2016 - 09:30 PM

Here's the latest from my workshop - one First Order E7-11 Stormtrooper Rifle (Officer issue)

c7c2roW.jpg

I've seen a lot of pristine versions of this rifle out there, so I planned from the get-go to make this baster look very used. I laid down a flat aluminium base under the black areas and, once again, used a rocksalt mask to get some chips around the edges. As an added bonus, if I accidentally rub the black away there's a layer of metallic aluminium under there!

I went a bit overboard with the rocksalt on the first coat and so went back over it with less salt and more black. This gave the black a mottled, fatigued look to it which came up great in the weathering stage.

r2wvsuJ.jpg
  • 0

#4966 Mehku

Mehku

    Member

  • Members
  • 383 posts

Posted 22 March 2016 - 12:56 AM

IMG_4918_zpsyvtclsia.jpg

 

I don't know why I didn't try this before. Feels great.


  • 0

#4967 Kilomona

Kilomona

    Member

  • Members
  • 108 posts

Posted 27 March 2016 - 11:29 AM

My 5 minute jury rigged pump-action retaliator.image.jpeg
  • 0

#4968 Gears

Gears

    The boy who lived

  • Members
  • 848 posts

Posted 03 April 2016 - 01:51 AM

*
POPULAR

Rough af Burst Wave modification. Write Up coming soon.

Hw5XHiM.jpg


  • 1


WoW is destroying my life.

-Groove out.
 

 
LAWN GNOME LIBERATION FRONT
 

#4969 Sketch Art Online

Sketch Art Online

    Member

  • Members
  • 25 posts

Posted 06 April 2016 - 04:17 PM

Rough af Burst Wave modification. Write Up coming soon.

 

I would love to see that write up.  the burst wave is my favorite stock and modified blaster.  i love the stock concept, the mod potential and the ergonomics. although i don't own one,  i plan to get one and i feel like almost no one has done anything with them.  its nice to see someone has. great work.

 

webcam-toy-photo1_zpsuqxmjbnk.jpg

 

you want a pic? heres a pic.  this was my idea for a pump action tek six. needless to say, it didnt work. so i kept the maverick slide as just a fore grip.  the mav handle is very comfortable and i like the tek six's stock performance. the only internal mods have been seal improvement and barrel post removal. and im never yosuing my webcam as a camera again


Edited by Sketch Art Online, 06 April 2016 - 04:18 PM.

  • 0

Do not aim at eyes or face


#4970 BritNerfMogul

BritNerfMogul

    Member

  • Members
  • 560 posts

Posted 06 April 2016 - 06:37 PM

002_zpssaviff48.jpg

003_zpscqdwnwvt.jpg

006_zpskgfir9yd.jpg


  • 0

#4971 SuicideNeil

SuicideNeil

    Member

  • FNG-FB 
  • 1 posts

Posted 14 April 2016 - 11:06 AM

Greetings, thought I'd sign up and share my work:

 

Demolisher 'Bolt Gun'

 

Demolisher11.jpg

 

Demolisher13.jpg

 

Demolisher10.jpg

 

I removed most of the locks, replaced the wiring with 18g silicon, deleted the missile launcher and used the pump grip to make a new fore-end. I run a 3s LIFepo4 battery which sits in the fore-end ( one side can be unscrewed to access the battery ). Shoots hard and is very loud- I like it a lot...

 

Longshot

 

Longshot14.jpg

 

Longshot13.jpg

 

Longshot16.jpg

 

I went to town on this blaster:

 

10KG SPRING

ALUMINIUM BOLT SLED

AIR RESTRICTOR REMOVED

PRESSURE-RELIEF HOLE FILLED

MECHANICAL LOCKS REMOVED

NEW O-RING SEAL ON PLUNGER

REGREASED CONTACT SURFACES ON MOVING PARTS

PADDING ON PLUNGER HEAD

CUSTOM PRIMING BOLT

CUSTOM PAINT-JOB

FRONT-GUN SHELL INTEGRATION

OPEN SIGHTS & PICITINNY RAIL ADDED

JAM DOOR MODIFIED TO OPEN AT ANY TIME

 

Paint-job is loosely inspired by District 9 'Prawn' weapons.

 

AlphaTrooper

 

AlphaTrooper8.jpg

 

AlphaTrooper7.jpg

 

Fewer mods made to this blaster, only external change is the not-very-subtle angled fore-grip:

 

OZNERFNERD UPGRADED 5KG SPRING

OZNERFNERD UPGRADED TRIGGER CATCH & SPRING GUIDE

REMOVED MECHANICAL LOCKS

RE-GREASED SEALS AND CONTACT SURFACES ON MOVING PARTS

ANGLED FORE-GRIP INTEGRATED INTO PUMP PRIMING HANDLE

JAM DOOR MODIFIED TO OPEN AT ANY TIME

RAIDER SHOULDER STOCK

 

Hammershot

 

Hammershot11.jpg

 

Hammershot13.jpg

 

Main mod here is the 7 shot 3D printed chamber/turret- it fits perfectly with very little work, and rotates just fine like the original. Didn't bother fitting a new spring as it's plenty powerful enough in stock form for my needs.

 

Thanks for reading :)


  • 0

#4972 Agles

Agles

    Member

  • Members
  • 48 posts

Posted 14 April 2016 - 01:21 PM

just finished up my Sonic Ice Retaliator pump kit. 

i added nobs on the side so it can be pumped or cocked like a bolt action. 

Attached Thumbnails

  • IMG_0741.JPG
  • IMG_0742.JPG
  • IMG_0743.JPG
  • IMG_0750.JPG

  • 0

#4973 Raiderous

Raiderous

    Member

  • Members
  • 13 posts

Posted 17 April 2016 - 01:29 AM

My Fixed And Painted Raider Pistol (it looked super makeshift before)

IMG_55911.JPG

 

My Firestrike Cannon (probably not even that high of a fps as I don't have a choronograph)

IMG_55931.JPG

 

so last game I went to (octoberish)

 

I let my sister use my raider and she isn't very strong and put it down

 

either she or some other "demon spawn" got a vinyl tiped dart inside the front grip (infront of the trigger guard)

 

I'm still in shock on how that was managed

 

no kid ive met is able to get a nerf gun jammed like that


Edited by Raiderous, 17 April 2016 - 01:30 AM.

  • 0

If I Can Mod a Nerf Gun

Anyone Can Mod a Nerf Gun.


#4974 Jeef

Jeef

    Member

  • Members
  • 25 posts

Posted 17 April 2016 - 05:56 PM

13055305_1085447884829709_22620369443662


  • 0

#4975 Duke Wintermaul

Duke Wintermaul

    Member

  • Members
  • 516 posts

Posted 18 April 2016 - 03:24 PM

My search bar function is on the fritz, so here's hoping I havent posted these here yet.

9O59Qb8.jpg?1zR2D4si.jpguQUqSUV.jpgvCYRDNF.jpgDPX9nfi.jpg7tMLAbj.jpgva5jpnR.jpgSbD0vbx.jpgEdAFL7Z.jpgaXlxgK0.jpgHJVyDwX.pngWUUhgUU.pngCK5n6dw.pnguBtkm44.jpgfoZBlYC.jpg4YgbvOj.jpgngWfNqC.jpggmIsuWs.jpgw05QlZc.jpgY9GWthk.jpg


  • 0


1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users