Jump to content


Photo

Modification and Paintjob Pictures

POST PICTURES ONLY. How hard is that.

5162 replies to this topic

#4651 LordGiratia

LordGiratia

    Member

  • Members
  • 59 posts

Posted 20 December 2013 - 09:41 PM

Posted Image

Posted Image

Just Christmas presents for friends of mine.
And if you are noticing that the quality is different, well my phone's camera isn't working.

Edited by LordGiratia, 20 December 2013 - 09:42 PM.

  • 0
Warning, my posts aren't finished when I post them, wait 15 minutes and the post will be perfect.

#4652 Gears

Gears

    The boy who lived

  • Members
  • 848 posts

Posted 22 December 2013 - 01:12 PM

When did NH turn into HvZsource?

REAL NERF

Posted Image


Posted Image
  • 0


WoW is destroying my life.

-Groove out.
 

 
LAWN GNOME LIBERATION FRONT
 

#4653 Guest_TheSilverhead_*

Guest_TheSilverhead_*
  • Guests

Posted 29 December 2013 - 07:28 PM

Cybranasaurus_Rex
http://supcom2.wikia...ental_Lizardbot
Rapidstrike with 18 AWG wire, 3rd gen Pro Eflite 180's, duct tape thickened flywheels, and an integrated TITAN, cause fuck zeds. 1 1/2" sink drain adaptor, shown with absolver. Also has rocket and singled barrels. Hornet pump integrated inside the stock, stock locked out. You pump by grabbing the PVC segment. And yeah, Tamiya connectors. Run off a 3300mAh sub-C stick pack, 7.2v, or a 9.2v flatpack depending.
Posted Image
Posted Image
  • 0

#4654 Xellah

Xellah

    They call his chin.... Captain Underpants

  • Members
  • 178 posts

Posted 30 December 2013 - 11:39 AM

The products of a mod party between Chris (ck32) and I this weekend:

Posted Image

Mods:

- 2 Cutdown Rapidstrikes, rewired to an external battery pack. Stock motors. Both of them run off of 4 trustfires.
- Big Blast with an internal wye, solvent welded to the tank. Supa-optimal hole cut in the shell for the use of a hopper magazine.
- DT3 monstrosity. I posted this a while ago, but went back and made several changes. It still shoots lazers but unfortunately it now has the ability to shoot every speedloader I've made out of the coupling upon firing.
- I fixed the broken plunger head on my Crossbow and added polycarb sideplates to reduce stress on the shell.

Now, let's have a moment of silence for all of those people in the world with no swag.
  • 0
Ultimator Duel

it cant be as bad as reloading an ak-47 on the run


#4655 charlie156

charlie156

    Member

  • Members
  • 89 posts

Posted 31 December 2013 - 04:59 PM

I believe this is called an SVT 4B? 1/2 Conduit PVC coupler
Posted Image
Posted Image

my show piece Rear-Loading Tank-Expanded CPVC/REDLINE AT2K. haven't given it a name yet, will soon. 130ft ranges. 1 foot long redline barrels, 6-8 pumps.
Posted Image
Posted Image

My NIC panther. 3 different barrel systems. both RSCB's (black barred on is redline, white one is cpvc) are 3 1inch size dart clips, all hitting 110 on the last shot at ten pumps. cpvc rscb is 9 inch barrel, redline rscb is a 10 inch barrel. Singled barrel I believe is 11 inchs. my cleanest Panther yet, I believe one of the cleanest looking one out there for what it is. (not being cocky) half inch 90* CPVC street elbow hot glued to tank. Supported by shell cut to fit it perfectly.
Posted Image
Posted Image

Berserker pistol? tank from a Buzzbee berzerker, with elastics centring lever and cut down trigger glued and epoxyed on for comfortable 1 or 2 finger pull, assortments of scarp cpvc for hand (hot glued in place) and custom tooth pick pump stopper. 1/2 PVC conduit coupler 100ft + flat 2ft redline barrel, 5 pumps.
Posted Image
Posted Image

Cleanly done quick blast recon. goal was to make as stock looking as possible, and accomplished it. quick blast tank has been reinforced EXTENSIVELY. 15 pumps. 3/4-1/2 cpvc reducer bushing. 100ft 12inch CPVC/redline barrel. flat.
Posted Image
Posted Image

AT3K pistol. just a AT3K tank with firing pin bent to contour own finger with vinyl tubing around for comfortable trigger pull. Dart tag pistol thing for handle, vinyl tubing runs through handle and pex bars which tank is attached too. 3 pumps=100ft-120 ranges flat Universal coupler. 12inch CPVC/redline barrel.
Posted Image
  • 0

#4656 Exo

Exo

    Member

  • Members
  • 391 posts

Posted 31 December 2013 - 08:12 PM

Picked up one of these one clearance at Target for $10, took about 5 minutes for the whole mod. There was a string inside each of the latex tubes, so I removed that.
Stock ranges were ~15' flat, didn't drop too many shots with it stock.
With just the strings removed, the highest ranges I got were ~65' flat.
The arrows are crappy, and will happily deviate by several feet at full range and stretch.

Posted Image
Posted Image
It's not really as awkward to hold as it looks, I'm just holding it that way so it'd be in frame.
  • 0

#4657 Azrael0987

Azrael0987

    formerly ijackofftomen. Different dude from Azrael.

  • Members
  • 135 posts

Posted 01 January 2014 - 12:21 AM

Posted Image

Posted Image

Modified rapidstrike as i'm sure you can tell. Removed the resistors and locks. Battery replacement and relocation. Now using a 12v 1.2 amp hour battery. Even at less voltage than 4 trustfires it performs great because it has better current. And lasts for a hell of a long time. Only downside is size and weight, but meh. Only awaiting a pair of blade 180 motors now. I integrated an airmax 6 tank into the old battery compartment (which fits like a dream I might add). Internal cpvc couplar (and yes I know the barrel is crooked. There was a small piece of plastic in the tray left that I was too lazy to go back and remove. It pushed the rear of the tank up slightly.). Removable hornet pump attached to the tac rail. I EP two strikefire (I think) rail attachment pieces to the pump to easily attach and detach it. If I ever don't want the extra bulk in the front the pump and barrel come off and the tubing gets tucked away in the second hole. I've been wanting to put a secondary shot onto this thing for a while now and just wasn't sure what I wanted. It turned out even better than I had hoped. And as for the empty AM6 shell; I think a titan tank would suit it nicely. hint hint. Wow that paragraph got long. Sorry folks.

Edit: I don't currently have petg, so i'm stuck with cpvc barrels for most everything. DO NOT pump the AM6 tank more than 8 times or it will blow heads off of elite darts consistently.

Edited by Azrael0987, 02 January 2014 - 05:01 PM.

  • 0

#4658 MAV13

MAV13

    Member

  • Members
  • 129 posts

Posted 02 January 2014 - 11:21 PM

New tech 2014


Posted Image


Posted Image

  • 0

#4659 Duke Wintermaul

Duke Wintermaul

    Member

  • Members
  • 516 posts

Posted 03 January 2014 - 08:41 PM

You might have seen the Six shot Centurion clip conversions people have been doing with the new Magnus. This is not one of those.

Cracking it open, I decided there was no reason not to combine the internal 3 with the external 6. The Nine shot Magnus was born.

Posted Image

It might even hold 10 darts, I only have nine to test with but it seems there is room for a tenth dart; unknown if this 10th will create feeding issues.
  • 0

#4660 Moldoux

Moldoux

    Member

  • Members
  • 3 posts

Posted 05 January 2014 - 02:28 PM

Posted Image

This is the first of many Hammershots I'll be painting for my friends post apocalyptic LARP.
  • 0

#4661 rabbitt773

rabbitt773

    Member

  • Members
  • 3 posts

Posted 07 January 2014 - 12:13 PM

Posted Image
My stryfe with masterkey. Mounted the roughcut further forward and left most of the grip intact so that I can detach the entire barrel extension and use it as a seperate blaster. The stryfe itself is stock.
Posted Image
My firestrike. Air restrictor removed and added a removable suppresor. Needs repainting.

Edited by rabbitt773, 07 January 2014 - 12:42 PM.

  • 0

#4662 dash219

dash219

    Member

  • FNG1 
  • 1 posts

Posted 07 January 2014 - 10:52 PM

I finally finished my roughcut/rapidstrike integration:
Posted Image

Here's the roughcut where I cut it so as to give the rapidstrike enough clearance. It's definitely a rough cut.
I'm hilarious.

Posted Image

Side-view of the roughcut:

Posted Image

The integration from barrel to roughcut:

Posted Image

I just made the cut, drilled four holes in the roughcut and retaliator barrel along their tactical rails, then bolted them together with screws and nylock nuts.
The rapidstrike has all the basic mods as demonstrated in Coop772's tutorial and 3 trustfire batteries.
The roughcut is completely stock.
The velcro is there to keep the barrel from wobbling on the rapidstrike, and also to carry taggers for my blowgun.
This is only my second real mod, so I'm pretty happy with it.

Apologies if the pictures are a bit oversized.

Edited by dash219, 07 January 2014 - 10:59 PM.

  • 0
-dash219-

#4663 ShaNayNay

ShaNayNay

    Member

  • Members
  • 254 posts

Posted 11 January 2014 - 03:32 PM

Nothing too special. The pump was broken so I replaced it with a Titan pump. Wyes make for excellent pump handles and fit perfectly on the stump of Titan pumps with one wrap of duct tape. I used the former UMB pump tube to coupler a broken raider stock onto the back.

Posted Image

Now back to being on hiatus.
  • 0

New Jersey is fuckin weird


#4664 Azrael0987

Azrael0987

    formerly ijackofftomen. Different dude from Azrael.

  • Members
  • 135 posts

Posted 12 January 2014 - 12:27 AM

My new favorite blaster I own. I absolutely love this thing. I'll make a pump action grip tomorrow when I won't be keeping people up with power tools. Replaced the spring with part of a k-26. Shoots hella hard.
Posted Image

Posted Image

Posted Image

Posted Image

My clear nitefinder has already been posted here but the barrel cracked off (I think it was polyester because it was so brittle), so I couplered it.
Replaced the barrel on the firestrike. Short piece of k-26. By sheer luck since nothing was measured it shoots very straight. The power and seal worked out to not give any extra puffs of air after the dart leaves.
Replaced the barrel on the nitefinder variant (cant remember the name of it for the life of me). Either part of a k-26 or another local hardware store spring I used to use for nitefinders. Much louder but still. shoots super hard.

Edit: Finished the pump action grip today. It's fugly as fuck but functional. I might make a better looking one tomorrow after school if I'm ambitious. I used a piece of 2in pvc cut and formed it by heating it with a heat gun.

Posted Image

Posted Image

Edited by Azrael0987, 12 January 2014 - 11:31 PM.

  • 0

#4665 Aeromech

Aeromech

    Member

  • Moderators
  • 434 posts

Posted 13 January 2014 - 12:05 PM

[URL=http://s1071.photobucket.com/user/Archangel2014/media/100_0111_zps932638a1.jpg.html]
Posted Image

Newest addition to the project. Sandpaper grips from skateboard tape and a custom wooden stock.

Edited by Aeromech, 12 February 2014 - 08:47 PM.

  • 0
Watch my shitty videos

This is so ghetto but so awesome.


#4666 charlie156

charlie156

    Member

  • Members
  • 89 posts

Posted 13 January 2014 - 07:58 PM

Newest and cleanest NF rifle In a long time. 90-100 Flat
Posted Image
Posted Image
Posted Image

Modded Crossbow With AT2K integration. Handle has been supported to be comfier. Seal has been redone to be perfect, will repaint old crappy pain job done before me once less cold. 140 flat
Posted Image
Posted Image
Posted Image

Originaly an AnTheHeroIs modded Crossbow. Fixed by me. Seal been improved, O-rings at spring rest blot reinforcement replaced. 140-flat
Posted Image
Posted Image
Posted Image

Newest Tank Expanded AT3K. 1FT long redline barrels. Rapid Fire 20 pump replaced. Rear-loading hole. 130-140 flat
Posted Image
Posted ImagePosted Image
  • 0

#4667 nzh1998

nzh1998

    Member

  • Members
  • 3 posts

Posted 13 January 2014 - 11:19 PM

My StryfeMG
Just a stryfe with longstrike buttstock!
Secured with Eputty, Epoxy & a screw!

Posted Image


Posted Image
Yeap! The buttstock is a little offset to the right. This makes aiming down the iron sights easier. ( I am a righty)
  • 0

#4668 OBH

OBH

    Member

  • FNG1 
  • 2 posts

Posted 15 January 2014 - 03:18 PM

Posted Image
  • 0

#4669 Moldoux

Moldoux

    Member

  • Members
  • 3 posts

Posted 15 January 2014 - 10:29 PM

Posted Image

My just finished Sledgefire. I didn't really feel the need to mod it.
  • 0

#4670 Pointman9

Pointman9

    Member

  • Members
  • 131 posts

Posted 18 January 2014 - 05:01 PM

OBH, that is a beautiful paint job.

Finished this monstrosity.
Posted Image
This thing started with the observation that I was wasting a ton of darts at wars with just the Rapidstrike, but I loved the range and power of it. So, here is my theoretical solution. The Stryfe and the Rapidstrike both run off of the 12v SLA battery on the RS stock, and yes, you can run both blasters at the same time with very little drop in range.
  • 0
There is no such thing as overkill. There is only cost efficiency.

#4671 Boringmods

Boringmods

    Member

  • FNG1 
  • 1 posts

Posted 18 January 2014 - 05:09 PM

My first post!

Posted Image

A WIP on my full-auto Stryfe. It uses the dart pusher mechanism from a Automatic Tommy 20. Both the blaster's flywheels, and dart pusher mechanism have a different power source, mostly because I'm too lazy to rewire them into one 9-volt battery. It is also trigger-activated.

Also, sorry for the low quality picture. I took the picture with a DSI XL, since I couldn't find my camera.

Edited by Boringmods, 18 January 2014 - 05:18 PM.

  • 0

#4672 MAV13

MAV13

    Member

  • Members
  • 129 posts

Posted 26 January 2014 - 08:50 PM

PAS with spectre grip - "Repulsor"
Posted Image


And it's baby sister "Pepper"
Posted Image

  • 0

#4673 MCGeneral

MCGeneral

    Member

  • Members
  • 2 posts

Posted 31 January 2014 - 12:28 AM

Posted Image Posted Image Posted Image anyways this is my retaliator with integrated stryfe I've been looking into sights and this is what I've come up with so far it is around 95% accurate as long as I aim straight through it and not wrongly and I have to take a moment to aim not just whip it up like iron sights but it seems to help me personally plus I have a spam able under barrel. But please tell me what u think of this scope and the dot is black because I had a black sharpie and thought it was different.
  • 0

#4674 makeitgo

makeitgo

    Member

  • Members
  • 216 posts

Posted 02 February 2014 - 10:43 AM

XXXBowPup.

Inspired by Ryan's Rainbow Pup.

Shoots hard.

Posted Image
  • 0
"...he is one speedy bastard." ~ Cheyner

#4675 popatachi

popatachi

    Member

  • Members
  • 206 posts

Posted 04 February 2014 - 11:01 PM

Found this LS that was cut up for a sodizzle breach and everyone pressured me into finishing it. ;)

Not yet finished, but functionally working.

Posted Image

Posted Image

Posted Image
  • 0


1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users