Jump to content


Photo

Modification and Paintjob Pictures

POST PICTURES ONLY. How hard is that.

5162 replies to this topic

#4176 Shoopy

Shoopy

    Member

  • Members
  • 208 posts

Posted 01 September 2012 - 06:28 PM

I present to everyone Project 4S (Shoopy's Secret Spector Surprise).
This ain't no standard (or safe) sceptor.
This is a modded sceptor. I has been modded following Hero's writeup.
In addition, it has a custom wood stock and 3" PVC tank replacement.
I can fire 25 shots with 50 psi in the tank. I can certainally go with a higher psi but I'm scared it will blow up :)
Currently, the tank it closely connected but it will be in a backpack with the compressor and battery.
Standard 100' ranges.
This gun is a lot of fun to shoot.
This is Phase 1. Phase 2 will have the backpack setup.
Posted Image
Posted Image

Edited by Shoopy, 01 September 2012 - 06:53 PM.

  • 0
You know you all want to crouch like a tiger...

PA POWER Clan Is that all ya got?

#4177 hoongfu

hoongfu

    Member

  • Members
  • 475 posts

Posted 01 September 2012 - 10:54 PM

Koree did this. Its called "Cheaper than Birth Control"

Posted Image


And look what I did immediately after. Its called "Plan B? How about Plan 'N' ".
Posted Image


And then what Koree did to what I did.
Posted Image

Edited by hoongfu, 01 September 2012 - 10:55 PM.

  • 0

#4178 bhajj94

bhajj94

    Member

  • Members
  • 180 posts

Posted 03 September 2012 - 12:53 PM

So, I decided to finally put this up here, after I finished it almost a month ago...
It is my Nite-Jolt! The nitefinder has seal improvement, spring replacement, cpvc coupler, and a little integration.
The jolt has a cpvc barrel inside 1/2" conduit pvc to make it more sturdy. Also, it has a spring replacement, and red/black paint job done by princesspeach33.
The Nf gets about 75ft flat, and the jolt gets about 60ft flat. All that I need to do now is get some magnets for a holster, and BAM, it's ready for action!
The integration is messy, but it is essentially super glue, hot glue, and goop. Also, it is held on with a purple ziptie.
Posted Image
Posted Image
Posted Image
  • 0
Probably lurking somewhere...

#4179 GreenSpike

GreenSpike

    Member

  • Members
  • 21 posts

Posted 03 September 2012 - 04:44 PM

Background: I'm going to a certain annual 24-hour long HvZ game in Washington State this month. Game is literally 24 hours - from noon saturday to noon sunday - with zero time-outs for sleep, eat, pee, etc. The game hosts ask everyone to paint their blasters ("Guns") as realistic as possible, and don't necessarily require orange tips. This is the 5th annual game. I've never been, but I hear they had 300+ players last year. This blaster is for that:

Posted Image

Shout-out to any nerfers in Washington State: the game's website is here. It's next weekend - September 08th-09th; $25.

The blaster's stock features a IR-based nightvision scope.(Basically, Infrared LEDs are on the front and side of the scope and project light which is below the human visible light spectrum, a camera lens views that light, and displays it on the internal screen in the form of that classic green monochrome like you see in spy movies.) Powered by a 5xAA battery pack, all of which is connected to the detachable shoulder stock. The IR LEDs have 2 brightness settings and are controlled by a series of switches mounted on the right side of the scope.

Posted Image

I put a pressure sensor inside the rubber guard around the eye piece, so when I put it up to my face, it turns on.
  • 0

#4180 Shoopy

Shoopy

    Member

  • Members
  • 208 posts

Posted 03 September 2012 - 05:43 PM

Phase 2 of Project 4S done.

This is different from the first one because: The vinyl tubing is longer, portable compressor, 2 6v batteries powering the compressor.

The 2 6v aren't powerful enough to power the compressor to full potential.

Phase 3 will have a 12v battery and regulator/OPRV.

Full Setup:
Posted Image

Backpack set-up:
Posted Image

Edited by Shoopy, 03 September 2012 - 06:33 PM.

  • 0
You know you all want to crouch like a tiger...

PA POWER Clan Is that all ya got?

#4181 Ice Nine

Ice Nine

    Prince Dangus

  • Administrators
  • 1,460 posts

Posted 04 September 2012 - 05:18 PM

Modified a Splitfire.

Posted Image


Posted Image


Posted Image


Posted Image


The immediately previous owner bought this Splitfire with a dinged-up layer of white spray paint and banged-up, poorly cut internals. I sanded off some of it over a few days, and at this point I like the weathered look it has enough that I think I'll keep it (mostly) this way. I put eight inch CPVC barrels on and used a few layers of goop and newspaper to ensure an airtight and straight setup. It shoots way better than I expected it to; these things have crazy range if you pull the trigger fast enough.
  • 0

Unholy Three: DUPLUM SCRTA, DUPLUM PROBLEMA (2009)

But Zeke guns tend to be like proofs by contradiction

Theoretically solid but actually non-constructive

Rnbw Cln


#4182 clownieX

clownieX

    Member

  • Members
  • 104 posts

Posted 06 September 2012 - 09:32 PM

Here’s some things I made awhile ago.

MODS:
• Spring Replacement, (ACE 49)
• O-Ring/Seal Improvement
• “Center Fire” Trigger Bar
• CPVC Couplers
• AR Removal


My prototype “Gun Blade.” Sort of reminds me of “Halo” sword.
Posted Image

A mask inspired by “Darth Maul” for a friend.
Posted Image

“Slade” form “Teen Titans.” (Who was voiced by Ron Pearlman,Yea)
Posted Image
  • 0

#4183 Trevor

Trevor

    Member

  • Members
  • 98 posts

Posted 07 September 2012 - 09:19 AM

My Nerf Rayven.
Posted Image
Posted Image

Edited by Trevor, 07 September 2012 - 09:19 AM.

  • 0

#4184 ExAlpha

ExAlpha

    Member

  • Members
  • 38 posts

Posted 08 September 2012 - 08:29 AM

Posted Image

Longstrike codenamed "Blacklisted"

-Black, Yellow, Light Gray
-Air restrictor removed
-Safety lock removed
-Empty space filled with foam
-Plunger padded
-Barrel extension also painted (not shown, obviously)

Edited by ExAlpha, 08 September 2012 - 08:38 AM.

  • 0
Call me Timo. Captain Timo.

#4185 Coop

Coop

    #sogoodmuchtacticswowinit2winit360noscopehax0rleetbeastmodeactiv

  • Members
  • 775 posts

Posted 10 September 2012 - 06:27 AM

Longshot with integrated Maverick:
Posted Image

LED's off:
Posted Image
  • 0

On the other hand, the guy who posted before me used the word 'fuck' a lot so he probably knows what he's talking about.


#4186 clunk07

clunk07

    Member

  • Members
  • 12 posts

Posted 12 September 2012 - 03:03 PM

Various projects - personal and commissions - from the last 6 months...

Posted Image

Posted Image

Cheers,
  • 0

#4187 p1st0n

p1st0n

    Member

  • Members
  • 2 posts

Posted 13 September 2012 - 09:01 PM

A WIP of mine, stampede handle with polycarbonate plunger tube and interesting priming mechanism. Currently hitting high sixties with ~2.5inches of draw, and a [k26]. Pm for more details. Once it is finished I plan on doing a writeup.

http://imgur.com/0iylj]Posted Image[/URL]
http://imgur.com/qS9eA]Posted Image[/URL]
http://imgur.com/InEB8]Posted Image[/URL]
http://imgur.com/O4HBQ]Posted Image[/URL]
If pictures do not work let me know, they seem to work for me.

Edited by p1st0n, 13 September 2012 - 09:14 PM.

  • 0

#4188 Nerfomania

Nerfomania

    Member

  • Members
  • 207 posts

Posted 14 September 2012 - 04:25 AM

Much nicer to pump now.

Posted Image
  • 0
20:45 Talio I'll have the talk with you
20:45 Talio penis in vagina
20:45 Talio fin

#4189 SomethingNerfey

SomethingNerfey

    Member

  • Members
  • 47 posts

Posted 14 September 2012 - 03:33 PM

Posted Image

Posted Image

Posted Image

Posted Image

Posted Image
  • 0

#4190 bhajj94

bhajj94

    Member

  • Members
  • 180 posts

Posted 15 September 2012 - 10:14 PM

Okay, so before, this was my brother's triple shot, and it said "princesspeach33" on the top part. I re-painted it, and wrote "BHAJJ94" there instead. I also re-painted the pump handle (badly). I'm going to re-do some of it, painting it black and orange. Also, I re-turreted it. I just need to fix the air seal both between the turret and the PT, and in the PT. Right now it's shooting 75', but I'm expecting it to get around 100' when done. I also added the stock from my old UMS.

Posted Image
Posted Image
Rear loading...
Posted Image
U MAD BRO!?!?!
Posted Image

Edited by bhajj94, 15 September 2012 - 10:16 PM.

  • 0
Probably lurking somewhere...

#4191 Nerfomania

Nerfomania

    Member

  • Members
  • 207 posts

Posted 16 September 2012 - 01:00 AM

MOOOAAAARRRR!

Posted Image
  • 0
20:45 Talio I'll have the talk with you
20:45 Talio penis in vagina
20:45 Talio fin

#4192 bhajj94

bhajj94

    Member

  • Members
  • 180 posts

Posted 17 September 2012 - 08:58 PM

Anyone still wanna see a panther? I don't care if you don't, here it is! I transferred it from a secondary, to a viable primary.

Posted Image

What was done:
-Added Raider stock (detachable)
Posted Image
Posted Image

-Cpvc Coupler (8" Barrel)
Posted Image

-Plugged pump

-Replaced pump handle
Posted Image

Shoots a good 110' (15 pumps), while singled, haven't tried it hoppered yet, but probably get about 95-100'.

Edited by bhajj94, 17 September 2012 - 09:17 PM.

  • 0
Probably lurking somewhere...

#4193 pit viper

pit viper

    Member

  • Members
  • 28 posts

Posted 18 September 2012 - 07:53 PM

Here are some of my recent mods.

My whole vortex line.

Posted Image
Vortex Proton with maximum spring relocation.

Posted Image
Vortex Vigilon same as Proton.

Posted Image
Nerf Praxis same as first two along with an extra clip attached to each side and my custom flashlight.

Posted Image
Vortex Nitron with voltage upgrade

Posted Image
My singled Titan fully assembled.

Posted Image
The main body in the case.

Posted Image
The ammo and barrel in the same case.
  • 0

#4194 Pointman9

Pointman9

    Member

  • Members
  • 131 posts

Posted 20 September 2012 - 09:24 PM

Sceptor. Hoppered, tank replacement, handle replacement (obviously)
The barrel is completely wrong, it needs some SCH 80. The huuuuge tank is going to be stored in a backpack while playing. I can consecutively fire 30 shots when the tank is full with a stock OPRV.

Posted Image

Closeup of tank
Posted Image

Just the blaster by itself. I really like the positioning/angle of using wyes for the pump handle, but didn't want to waste a wye on something silly like a handle.

Posted Image
  • 0
There is no such thing as overkill. There is only cost efficiency.

#4195 Coop

Coop

    #sogoodmuchtacticswowinit2winit360noscopehax0rleetbeastmodeactiv

  • Members
  • 775 posts

Posted 22 September 2012 - 07:03 PM

Sexy Crossbow is sexy. And yes, that's a tacti-cool rail on the top...bitch.
Posted Image

Posted Image

Posted Image
  • 0

On the other hand, the guy who posted before me used the word 'fuck' a lot so he probably knows what he's talking about.


#4196 Shoopy

Shoopy

    Member

  • Members
  • 208 posts

Posted 22 September 2012 - 08:10 PM

First of, luvin that sceptor 2 posts above. (4S FTW)

Back from the dead, son! If you were at PWN>U, this is the annoyingly awesome gun I used. It is the only air gun I actually prefer to use at a NIC war.

In a nutshell, it's a tank expanded UMB that fills in 5 pumps with a integrated 3K tank that fills in 3 pumps.

I had other plans for this thang but never succeeded. I just decided to bring it back to its original roots, though I changed some things. I mechanically fastened pump so it doesn't fall off in the middle of a war (again). I also added a ball-valve so I can command if the pump fills both tanks for just the UMB. It's actually really effective.

Looks like crap (I know), works like Gold (in my eyes).

Posted Image
Posted Image
Posted Image

Hey, if you bring it back from the grave, you cant expect it to be a 10 in looks...

Edited by Shoopy, 22 September 2012 - 08:15 PM.

  • 0
You know you all want to crouch like a tiger...

PA POWER Clan Is that all ya got?

#4197 Ambience 327

Ambience 327

    Member

  • Members
  • 561 posts

Posted 23 September 2012 - 08:01 PM

Got my hands on a Panther. These things are absolute beasts, especially considering the $5 price tag. Less than an hour's work, and a day's drying (for the Goop and the epoxy putty) and it was ready to rock. The pump is untouched - i.e. stock OPRV - and is fully capable of firing the last shot from my RSCB and from my PumpSnap's hopper at decent ranges. I haven't measured, but the last shot is hitting at least 40' flat.

The most important mod I did, though, was the pump handle, which is just some CPVC (drilled out a bit to fit the pump shaft) and an elbow. Much easier to pump now.

Posted Image

Obviously, it is hitting even better ranges with a single barrel - clearing my entire back yard. (I really should measure it sometime for better range estimates.)

Posted Image

Aside from the basics of cutting off the original barrel and shaving down the shell to fit, I also filled some of the dead space in the coupler area with epoxy putty.

Posted Image
  • 0
Foam in the Fort IV
The fourth exciting Nerf War in Fort Wayne, IN.

#4198 kevne

kevne

    Member

  • Members
  • 57 posts

Posted 24 September 2012 - 09:05 AM

Element EX-6 'The Punisher'.

Inspired by the Marvel comics and created for a mod exchange with ThatBritishGuy.


Posted Image



Posted Image

Hand painted graphics.

Posted Image

Custom priming handle.

Posted Image

LED integrated in dart holder.
  • 0
BritNerf, the Queen's favourite Nerf Forum.

The UK's most popular Nerf Blog.

I also have a Website.

#4199 pjotrkuh

pjotrkuh

    Member

  • Members
  • 259 posts

Posted 24 September 2012 - 04:13 PM

Painted myself a Hail-Fire:

Posted Image
  • 0
When the shit hits the fan, you'd better wear a rain coat.....

#4200 Darthrambo

Darthrambo

    Member

  • Members
  • 116 posts

Posted 24 September 2012 - 08:00 PM

Posted Image
Barricon with Powerstrike 48 motors.

Took out the jam door lock and rewired it to rev the motors when the trigger is pulled just a few mm. Twisted the thermistor to cut it out of the circuit.
More specifics and stuff over Here
  • 0


1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users