5162 replies to this topic

[Seven7h Man]

Night finder with home made polycarb trigger and polycarb plunger tube.
It has an insane seal and I'm getting unofficial ranges of about 90 feet or even more.

[Spud Spudoni]

Well here are the two guns I have completed recently:


Big Bad Bow
Mods done:
AR removal, nitefinder spring addition, PVC spring rest, minimization, CPVC coupler. Hits mid 80's. Good loner gun.



Now for my newest gun:
Lanard Shotgun
Thanks for the help with it guys!
Mods done:
Singled, universal coupler, PAS spring replacement, torsion spring moved, trigger shaved down, E-taped plunger head, E puttied priming mech. Still have to glue on a stock. I love this gun. (I bought two)
It's hitting around high 70's with the PAS spring. Both were very fun guns.

Edited by Spud Spudoni, 15 July 2010 - 09:55 PM.

[Jollex]

I hadn't seen this mod done yet and it seemed like a pretty obvious integration to do.


Please excuse the shitty paintjob.

[BritNerfMogul]

I thought I'd put it back together to test it. I'm still painting the stock, and will put it back on when I'm ready

[Abyss Mods]

Three awesome Pistol Splats!

Edited by Abyss Mods, 17 July 2010 - 10:21 PM.

[NerfRogue83]

Had a little time to show meh RFSG some love---she needed it after the last war. New turret with 12" PETG barrels, Louiec3 barrel spacer, improved turret seal (triple O-ring), shell cleaned up and painted, new replaced plungerHead, and new spring combo.

So, Out with the old.........



In with the new........





Shes not finished yet, but with Popatachi's help she will be soon........

[sci-olyrocks]

Okay. I like to think of this as my first mod. I have taken out AR on all of the recons, but have done nothing like this before.



A double barrel maverick. One barrel sits to the left of the gun and the other to the right when neither are in the center. When one is in the center, the other is comfortably away from the one rotating so it can work.




I originally wanted to do a right sided loading maverick, but decided to do the double barrel one after seeing Dive236's youtubevideo. So, I AM NOT THE CREATOR OF THIS MOD!. I just wanted to see if I could replicate it. I think that no one came forward before Dive239(from youtube) and believe that this is his mod. If I am wrong, please tell me as I would like to know who is the creator of this mod. The only other mods dome to this are that all AR are gone from both barrels and the 3 pennies behind the spring for spring compression.

Edited by sci-olyrocks, 18 July 2010 - 07:58 PM.

[Lucian]

Sneak peak.

[Ice Nine]

After doing some cleaning, I put a fresh PVC bushing on the Pokémizer.



Completely airtight on the gun. Plunger dead stops if I plug it and doesn't move until I unplug it. The mounting for the extension spring prevents it from sucking darts into the setup, but I don't think the gun actually vacuums enough to really do that anyways.



Best setup ever. This gun is supes enjoyable.

[Lt Stefan]

Two Big Blasts that I use for loaners.



They have a 1/2" coupler inside a 1-1/4" threaded adapter for all kinds of attachments. It is a lot easier than using three different couplers and the 1-1/4" adapter can literally be used to make any size attachment you could want.



So far I have made a hopper, arrow barrel, rocket barrel, and shotgun attachment for each.


Now my 3k. This is how it returned from JSNO. I had to fix it on the spot (with duck tape), but it still worked quite well.




It shoots far.


All these guns were very easy to mod, I highly suggest this setup if you are looking for some effective blasters but don't have enough time to build more complicated mods.

Edited by Lt. Stefan, 19 July 2010 - 03:30 PM.

[Lucian]

Ok, so after a good days work, here are my results:





I'm adding even more lights tomorrow.

[jerm78]

[Aj]

@ Lucian, you need heaps more LED's, and smaller ones too. I've found 5mm LEDS or pre made SMD strips the best to work with. I posted a blue LED maverick a few pages ago, it had 9 LEDs in it. Recently I Finished a contract to do a RED LED maverick, with this one I was able to greatly improve on the design, packing 16 LEDs into the mav without restricting function at all. The wiring is dann near invisible because I planned the runs very well.

Here's some pics

play 'spot the wiring'





I was particularly proud that I got an LED in each quarter of the 'half dome' of the maverick (around the clip lock etc) whilst keeping it looking so clean, also all LEDs are attached to the same side as the internals, so the gun can be completely opened with ease, which is necessary as the battery will run out at some point.





And here's some lit up shots, It looks a little pink and the lights look a little yellow due to oversaturation, but IRL it's a solid rich red.











Finally here's my 'old blue' which sold on ebay for like $110 AUD to some guy in the states



-AJ-

(Aus_AJ on nerf IRC)

[xet]

Finnaly got a seriously taken paintjob finished my theme was vice versa

[Coop]

[xet]

Got another paintjob finished.

[chase]

Here's my primary and sidearm: My longshot and nitefinder. I've got a good friend who can paint very well. Competition to Tigadee even.



I'll edit this post with better picture tomorrow.

[Eik]

Tac-Shield

Still need to install the plexiglass window...

Edited by Eik, 26 October 2010 - 04:13 AM.

[flyingchicken]

Just some work-in-progresses.

[Prince Valor]

Rear Loading and Pump Handle replaced SM3K

[sci-olyrocks]

So the pegs holding the maverick turrets in place broke the other day on my double turret mav. So I decided to do the complete turret removal mod. It turned out nice, and I now have 2 turrets that can be swapped in or out quickly.

[Eik]

I repainted my scout over the 4th. I intended to integrate something into it, but gave up.
Still, I like the 'America' camo.

-

Edited by Eik, 26 October 2010 - 04:15 AM.

[cheyner]

Finished my Lanard Shotgun.

Craft foam use #132: Gun rest.


Rear loading slot and barrel spacer.

10 inch Petg barrels
Rear loading slots streamlined with 1/2" PVC
Actually using the stock
Barrel spacer made from a random sheet of plastic found at work.
2 layers of craft foam with some lube for the seal.
Extra nub on plunger cut off and filled with craft foam.
BBB + stock spring.
Improved plunger stroke.

[Lucian]

I've said it before and I will say it again. Contract Baghead for a paintjob, these pics don't do the guns justice.






Oh and a matching 2k:

[neodore]

Sorry about the picture I dont have a camera except for the one on my phone.